Brown, Elaine - University of Bradford - Centre for Advanced Materials Engineering

个人简介

Dr Elaine Brown is a Chartered Mechanical Engineer, with a first degree in Manufacturing Systems with Mechanical Engineering (Bradford) and a PhD in Ultrasonic Monitoring of Polymer Melt Extrusion (Bradford). She has worked in the IRC Laboratories at Bradford for over 20 years, initially as a Research Engineer and now as a University Academic.

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Abeykoon C., Kelly A.L., Vera-Sorroche J., Brown E.C., Coates P.D., Deng J., Li K. and Harkin-Jones E., Price K. (2014): "Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability" Applied Energy, 135 560-571. Abeykoon C., Kelly A.L., Vera-Sorroche J., Brown E.C., Coates P.D., Howell K.B., Deng J., Li K. and Harkin- Jones E., Price M. (2014): "Investigation of the Process Energy Demand in Polymer Extrusion: A Brief Review and an Experimental Study, " Applied Energy, in press. Bao W., Wu H., Guo S., Paradkar A., Kelly A.L., Brown E.C. and Coates P.D. (2014): "Effect of Ultrasound on Molecular Structure Development of Polylactide" Polymer-Plastics Technology and Engineering, 53 (9): 927-934. Vera Sorroche J., Kelly A.L., Brown E.C. and Coates P.D. (2014): "Infrared melt temperature measurement of single screw extrusion" Polymer Engineering & Science in press. Deng J., Li K.,Harkin-Jones E., Price M., Fei M., Kelly A.L., Vera-Sorroche J., Coates P.D. and Brown E.C. (2014): "Low-cost process monitoring for polymer extrusion" Transactions of the Institute of Measurement and Control, 36 (3): 382-390. Deng J., Li K., Harkin-Jones E., Price M., Karnachi N., Kelly A.L., Vera-Sorroche J. and Coates P.D., Brown E., Fei M. (2014): "Energy monitoring and quality control of a single screw extruder" Applied Energy, 113 1775–1785. ABEYKOON C., KELLY A.L., VERA SORROCHE J., BROWN E.C., COATES P.D., DENG J., LI K. and HARKIN-JONES E., PRICE M. (2014): "Process Efficiency in Polymer Extrusion: Correlation between the Energy Demand and Melt Thermal Stability" Applied Energy in press. ABEYKOON C., KELLY A.L., VERA SORROCHE J., BROWN E.C., COATES P.D., DENG J., LI K. and HARKIN-JONES E., PRICE M. (2014): "Process Efficiency in Polymer Extrusion: Correlation between the Energy Demand and Melt Thermal Stability" Applied Energy in press. Vera-Sorroche J., Kelly A.L., Brown E.C., Gough T.D., Abeykoon C., Coates P.D., Deng J., Li K. and Harkin-Jones E., Price K. (2013): "The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE" Chemical Engineering Research and Design in press. Abeykoon C., Martin P.J., Kelly A.L., Li K., Brown E.C. and Coates P.D. P.D.(2013): "Investigation of the Temperature Homogeneity of Die Melt Flows in Polymer Extrusion" Polymer Engineering and Science, in press. Vera-Sorroche J., Kelly A.L., Brown E.C., Coates P.D., Karnachi, N., Harkin-Jones E., Li K. and Deng J. (2013): "Thermal optimisation of polymer extrusion using in-process monitoring techniques" Applied Thermal Engineering , 53 405-413. Abeykoon C., Martin P.J., Kelly A.L. and Brown E.C. (2012): "A review and evaluation of melt temperature sensors for polymer extrusion" Sensors and Actuators A: Physical, 182 16-27. Whiteside B.R., Spares R., Brown E.C., Norris K., Coates P.D., Kobayashi M., Jen C.K. and Cheng C.C> (2008): "Optical imaging metrology for micromoulding cavity flows and products" Plastics, Rubber and Composites, 37 (2-4): 57-66. Polynkin A., Bai L.,Pittman J.F., Sienz J., Mulvaney-Johnson L., Brown E.C., Dawson A., Coates P.D., Brookshaw B., Vinning K. and Butler J. (2008): "Water assisted injection moulding: development of insights and predictive capabilities through experiments on instrumented process in parallel with computer simulations," Plastics, Rubber and Composites, 37 (2-4): 131-141. Kelly A.L., Brown E.C., Howell K. and Coates P.D. (2008): "Melt temperature field measurements in extrusion using thermocouple meshes" Plastics, Rubber and Composites, 37 (2-4): 151-157. Brown E.C., Mulvaney-Johnson L. and Coates P.D. (2007): "Ultrasonic Measurement of Residual Wall Thickness During Gas Assisted Injection Molding" Polymer Engineering and Science, 47 (11): 1730-1739 . Mulvaney-Johnson L., Cheng C.C., Ono Y., Brown E.C., Jen C.K. and Coates P.D. (2007): "Real time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors" Plastics, Rubber and Composites, 36 (3): 111-121. Cheng C.C., Ono Y., Whiteside B.R., Brown E.C. and Jen C.K., Coates P.D. (2007): "Real-time Diagnosis of Micro Powder Injection Molding Using Integrated Ultrasonic Sensors" International Polymer Processing, 22 (2): 140-145. Ono Y., Whiteside B.R., Brown E.C., Kobayashi M., Cheng C.C. and Jen C.K., Coates P.D. (2007): "Real-time process monitoring of micromoulding using integrated ultrasonic sensors" Transactions of the Institute of Measurement and Control, 29 (5): 383-401. Kelly A.L., Brown E.C. and Coates P.D. (2006): "The effect of screw geometry on melt temperature profile in single screw extrusion" Polymer Engineering and Science, 46 1706-1714.