Noroozi, Siamak - Bournemouth University - Department of Design & Engineering

个人简介

Professor Siamak Noroozi is the Director of Design simulation Research Centre at Bournemouth University. He moved to Bournemouth University in 2008 after 9 years at the University of the West of England, Bristol where he was Director of the Computational Mechanics Research Centre and lectured in areas such as mechanical engineering, structures and design. He has a long and well established link with Airbus UK, where for the past 13 years, he has been providing training and CPD in the area of advanced mechanics of materials and lightweight structure design and analysis.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Hawkins, J., Noroozi, S., Dupac, M. and Sewell, P., 2016. Development of a Wearable Sensor System for Dynamically Mapping the Behavior of an Energy Storing and Returning Prosthetic Foot. Measurement Science Review, 16 (3), 174-182. Noroozi, S., Khoo Shin Yee, Alex Ong Zhi Chao and Maggs, C., 2016. Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees. Sports Engineering, DOI: 10.1007/s12283-016-0202-1. Aslani, N., Noroozi, S., Yee, K.S., Chao, A.O.Z. and Maggs, C., 2016. Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees. Sports Engineering, 1-8. Noroozi, S., Rahman, A.G.A., Dupac, M., Ong, Z.C., Mohd Al-Attas, M.B.S. and Davenport, P., 2016. Condition monitoring and diagnostics of an extruder motor and its gearbox vibration problem. Insight: Non-Destructive Testing and Condition Monitoring, 58 (2), 101-107. ASLANI, N., NOROOZI, S., HARTLEY, R., DUPAC, M. and SEWELL, P., 2016. ASSESMENT OF KEY PARAMETERS ON THE PERFORMANCE OF THE DELTOID MUSCLE IN REVERSE SHOULDER ARTHROPLASTY — A MODELING AND SIMULATION-BASED STUDY. Journal of Mechanics in Medicine and Biology. Hassani, H., Ghodsi, M., Shadi, M., Noroozi, S. and Dyer, B., 2015. An Overview of the Running Performance of Athletes with Lower-Limb Amputation at the Paralympic Games 2004–2012. Sports, 3, 103-115. Thompson, S.B.N., Chinnery, H., Noroozi, S., Dyer, B. and Barratt, K., 2015. Retinoblastoma: identifying the diagnostic signs for early treatment. International Journal of Neurorehabilitation, 2 (2), 1-11. Dyer, B., Noroozi, S. and Sewell, P., 2015. Sprinting with an amputation: Some race-based lower-limb step observations. Prosthetics and Orthotics International, 39 (4), 300-306. Davenport, P., Noroozi, S. and Sewell, P., 2015. Measurement of transtibial socket pressure distribution in gait with changes in prosthesis alignment - a systematic review. Clinical Biomechanics. Dyer, B.T.J. and Noroozi, S., 2015. A proposed field test method and an assessment of the rotational drag of contemporary front bicycle wheels. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 229 (1), 67-75. Hassani, H., Ghodsi, M., Shadi, M., Noroozi, S. and Dyer, B., 2014. A Statistical Perspective on Running with Prosthetic Lower-Limbs: An Advantage or Disadvantage? Sports, 2 (4), 76-84. Kong, K.K., Noroozi, S., Rahman, A.G.A., Dupac, M., Eng, H.C., Ong, Z.C., Khoo, S.Y. and Vinney, J.E., 2014. Non-destructive testing and assessment of dynamic incompatibility between third-party piping and drain valve systems: An industrial case study. Nondestructive Testing and Evaluation, 29 (2), 154-163. Noroozi, S., Rahman, A.G.A., Khoo, S.Y., Zahedi, S., Sewell, P., Dyer, B. and Ong, Z.C., 2014. The dynamic elastic response to impulse synchronisation of composite prosthetic energy storing and returning feet. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 228 (1), 24-32. Dupac, M. and Noroozi, S., 2014. Dynamic Modeling and Simulation of a Rotating Single Link Flexible Robotic Manipulator Subject to Quick Stops. Strojni?ki vestnik - Journal of Mechanical Engineering, 60 (7-8), 475-482. Kong, K.K., Ong, Z.C., Khoo, S.Y., Ismail, Z., Ang, B.C., Chong, W.T., Noroozi, S. and Rahman, A.G.A., 2014. Identification of material properties of orthotropic composite plate using hybrid non-destructive evaluation approach. Materials Research Innovations, 18, S6-423-S6-428. Amali, R., Cooper, S. and Noroozi, S., 2014. Application of artificial neural network to predict static loads on an aircraft rib. IFIP Advances in Information and Communication Technology, 436, 576-584. Dupac, M. and Noroozi, S., 2014. Dynamic modeling and simulation of a rotating single link flexible robotic manipulator subject to quick stops. Strojniski Vestnik/Journal of Mechanical Engineering, 60 (7-8), 475-482. Rahman, A.G.A., Yee, K.S., Ismail, Z., Kuan, K.K., Chao, O.Z., Tong, C.W. and Noroozi, S., 2014. Impact force identification using the modal transformation method in collocated and non-collocated cases. Journal of Mechanical Engineering and Sciences, 6, 968-974. Kong, K.K., Khoo, S.Y., Ong, Z.C., Eng, H.C., Ismail, Z., Chong, W.T., Noroozi, S. and Rahman, A.G.A., 2014. Failure analysis of flow-induced vibration problem of in-serviced duplex stainless steel piping system in oil and gas industry. Materials Research Innovations, 18, S6-417-S6-422. Dyer, B., Sewell, P. and Noroozi, S., 2014. An Investigation into the Measurement and Prediction of Mechanical Stiffness of Lower-limb Prostheses used for Running. Assistive Technology, 26, 157-163.