近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1] 邓超,李培根,蔡力钢,段正澄. 基于设备环境模型的多工艺方案决策. 华中理工大学学报, 1997,25(3):11-13
[2] 邓超,李培根,罗滨,段正澄. 基于多工艺方案的车间作业计划方法研究. 华中理工大学学报, 1997,25(3):14-15
[3] 邓超,李培根,蔡力钢,段正澄. 车间作业计划与工艺设计集成研究. 华中理工大学学报, 1997,25(3):16-17
[4] Deng Chao, Li Peigen, Luo Bin. An Integrated System of CAPP and Job Shop Scheduling. in Proc. ICMA'97,Hong Kong, April 1997, 565-570
[5] Chao Deng, “AN ENVIRONMENTAL STRATEGY IN INDUSTRY”, TMCE (Fourth Inter The application of substance flow analysis in environment national Symposium on Tools and Methods of Competitive Engineering), Hubei, Wuhan, China, April 22-26, 2002, 81-97.
[6] 邓超,李培根, 物流分析模型在环境问题中的应用,环境技术,vol20, No4, 2002, 45-49
[7] Chao Deng, Peigen Li, Some issues in LCA for manufacturing industries, Proceedings of the International Conference on Manufacturing Automation, HongKong, December 10-12, 2002, 315-320
[8] 邓超,李培根, 偏平衡经济分析模型在环境问题中的应用,环境科学与技术,No2,2004,53-55
[9] 吴军,邓超, 基于UML的LCA中产品系统的建模研究, 华中科技大学学报,2004,32(4):21-23
[10] C Deng, Z Rong, J Wu, and J Deng, Research on collaborative quality management system,ICMA2004(International Conference on manufacturing automation). Wuhan.2004.Professional Engineering Publishing Limited, UK:607-612
[11] C Deng, J Wu, T Xia, and J Deng,Determination of boundary for product system in LCA,ICMA2004(International Conference on manufacturing automation). Wuhan.2004.Professional Engineering Publishing Limited, UK:583-590
[12] 夏添,邓超,吴军,生命周期评价清单分析的算法研究,计算机工程与设计,2005年7期,1681-1683
[13] 邓超,夏添,吴军, 产品生命周期评价原型系统设计和开发, 计算机集成制造系统-CIMS, 2005,Vol.11, No.9, 1319-1326
[14] 邓超,邵新宇,张毅,翟瑞仁,网络化制造中企业合作的博弈分析,计算机集成制造系统-CIMS,2006,Vol.12, No.6, 929-934
[15] 吴军,邓超,邵新宇,游本善,面向PLM的协同质量管理系统,华中科技大学学报,2006年6月,Vol.34 No.6,74-76
[16] 吴军,邓超,邵新宇,游本善,基于Web Services的企业应用集成方法研究,计算机应用研究,2006年第8期,64-66
[17] 邓超,游本善,吴军,面向服务架构的协同质量管理系统,机械制造,2006年2月,8-11
[18] 邓超,周献振,吴军,游本善,面向产品生命周期的质量信息模型研究与实践,计算机应用研究,2007年7月,162-164
[19] 邓超,夏添,基于J2EE的协同服务平台的研究和开发,华中科技大学学报,2007年6月,77-80
[20] 邓超,马晓彬,吴军,周献振,基于粗糙集理论的质量屋顾客需求分析技术,计算机集成制造系统-CIMS,2007,Vol13,No.6,1191-1195
[21] 邓超,王丽琴,吴军,生命周期评价与生命周期成本集成方法研究,中国机械工程,2007,Vol.18,15期,1804-1809
[22] 邓超,游本善,协同质量管理下的质量评价体系,机械设计与制造,2007年8月,192-194
[23] 刘琼,崔首领,邓超,吴军,基于J2EE的协同质量看板系统研究于实现。计算机工程与设计,2007年6月,28(11), 2667-2670
[24] X-Y. Shao, J. Wu, C. Deng, P-G. Li, A Web-enabled Collaborative Quality Management System,Journal of Manufacturing Systems,Vol.25,No.2,2006,pp95-107
[25] Deng, Chao; Li, Zhaohui; Shao, Xinyu; Zhang, Chaoyong, Integration and optimization of LCA and LCC to eco-balance for mechanical product design, Proceedings of the World Congress on Intelligent Control and Automation, WCICA'08, 2008, p1085-1090
[26] 邵新宇,邓超,吴军,王丽琴. 产品设计中生命周期评价与生命周期成本的集成与优化,机械工程学报,2008年第44卷第9期,13-20
[27] 邓超,王丽琴,吴军,基于工艺约束的生命周期评价与生命周期成本综合评价与优化,计算机集成制造系统-CIMS,2008,Vol14,No.8,1646-1651
[28] Chao Deng, Jun Wu, and Xinyu Shao. Reliability Assessment of Machining Accuracy on Support Vector Machine. Proceedings of First International Conference of Intelligent Robotics and Applications (ICIRA 2008), Wuhan, China, October 2008, Part II, LNAI 5315, pp.669-678, 2008. Springer-Verlag Berlin Heidelberg 2008
[29] Zhang, Chaoyong ; Liu, Qiong; He, Fei; Chao, Deng; Shao, Xinyu. Applying genetic local search to solve the flexible job-shop scheduling problem. Proceedings of the World Congress on Intelligent Control and Automation , WCICA'08, 2008, p 3925-3928
[30] Shao Xinyu, Wu Jun, Lv Yaqiong, Deng Chao. Reliability assessment methods of complicated mechanical product based on statistical learning theory. Advanced Materials Research Vols., 2008,44-46:575-580
[31] 邓超,吴军,万紫娟. 基于支持向量机工具的性能劣化建模方法,计算机集成制造系统-CIMS,2009,Vol15,No.4,685-689
[32] WU Jun, DENG Chao*(Corresponding author), SHAO Xinyu, XIE S Q. A reliability assessment method based on support vector machines for CNC equipment. Science in China Series E: Technological Sciences, Vol. 52, no.7,1849-1857
[33] Yuming Xu, Chao Deng and Jun Wu. Least Squares Support Vector Machines for Performance Degradation Modeling of CNC equipments. Proceedings of International Conference on Cyber-enabled distributed computing and knowledge discovery, CyberC, Oct. 9-11, 2009, 201-206
[34] Chao Deng, Qian Liu and Jun Wu. A Method of Improving Position Precision Based on Fuzz Control. Proceedings of Seventh IEEE International Conference on Control and Automation, Christchurch, New Zealand, December 9-11, 2009. 1382-1387
[35] 徐玉茗, 邓超. 基于Bootstrap方法的可靠性评估. 机械设计与制造,2010年第3期,105-107
[36] 徐玉茗, 邓超. 基于支持向量机和Bayes方法的机械系统可靠性综合方法. 机械设计与制造,2010年第5期,212-214
[37] 邓超,刘倩,吴军. 基于模糊控制的位置精度补偿方法. 计算机集成制造系统-CIMS,2010,Vol16,No.3,628-635
[38] DENG Chao; WANG-Yuanhang; WU Jun; XIONG Yao. The Design of Heavy NC Machine’s Fault Diagnosis Prototype System Based on Mixed Expert System. 2010 International Conference on Electrical and Control Engineering (ICECE 2010). June 26-28, 2010, Wuhan, China, 5460-5463
[39] DENG Chao; XIONG Yao ; Yuan-hang WANG; Wu Jun. Heavy Machine Failure Maintenance Strategy Study based on FMEA. Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010, p 1121-1124
[40] Yuan-hang WANG, Chao DENG, Yao XIONG, Jun WU, A Mixed Expert System for Fault Diagnosis, Proceedings - 2010 IEEE 17th International Conference on Industrial Engineering and Engineering Management, IE and EM2010, 916-919
[41] 邓超,吴军,毛宽民,熊尧. 面向大型数控机床的工艺可靠性评估.计算机集成制造系统-CIMS,2010,Vol16, No.10, 2250-2256
[42] 王远航,邓超,吴军, 熊尧. 基于混合型专家系统的重型机床故障诊断. 计算机集成制造系统-CIMS,2010,Vol16, No.10, 2139-2147
[43] 朱海平,邓超,刘繁茂,邓宇浩. 卧式加工中心现场失效数据分析实例研究. 计算机集成制造系统-CIMS,2010,Vol16, No.10, 2293-2297
[44] Wu Peng, Wu Jun, Deng Chao. SVR-based degradation analysis and reliability assessment for CNC machine tools. 2010 IEEE International Conference on Future Industrial Engineering and Application(ICFIEA2010), December 17~19, 2010,Shenzhen, China,14-17
[45] Xiong Yao, Wang Yuanhang, Deng Chao, Wu Jun. Nonlinear Dynamic Modeling and Validation of Heavy Machine’s Processing. 2010 IEEE International Conference on Future Industrial Engineering and Application(ICFIEA2010), December 17~19, 2010,Shenzhen, China,183-186
[46] 吴军,邓超,邵新宇,熊尧. 基于加工动力学模型的工艺可靠性仿真方法. 系统工程理论与实践, 2011, Vol31, No.7, 1403-1408
[47] 熊尧,吴军,邓超, 王远航. 面向重型数控机床的加工工艺参数优化方法, 计算机集成制造系统-CIMS, 2012,Vol18, No.4, 729-737
[48] DENG Chao, XIONG Yao, WANG Yuan-hang and WU Jun. Machining Process Parameters Optimization Based on Grid Optimization Algorithm , Advanced Materials Research, 2012, Vols.562-564 , 2021-2025
[49] DENG Chao, XIONG Yao , WANG Yuanhang,c and WU Jun, A study on reliability assessment for CNC equipment,Advanced Materials Research, 2012, Vols.562-564 , 903-907
[50] DENG Chao, WANG Yuanhang , XIONG Yao and WU Jun, Reliability assessment for CNC equipment based on multi-parameter degradation data,Advanced Materials Research, 2012, Vols.562-564 , 908-912
[51] DENG Chao,DONG Wenlong, WANG Yuanhang, XIONG Yao, Research on Fault Diagnosis Based on BP-SOM Hybrid Algorithms for NC machine, Advanced Materials Research, 2012, Vol. 544 , 32-37
[52] DENG Chao, MA Chao, XIONG Yao , WANG Yuanhang, An Optimization Method of the Heavy Machine Cutting Parameters , Advanced Materials Research, 2012, Vol.544 ,38-43
[53] Wu Jun, Deng Chao, Xiong Huan, Xiong Yao, Equipment Performance Degradation Modeling For Reliability Prediction Based on n-ARIMA model, Advanced Materials Research, 2012, Vol.544 , 24-31
[54] Chao Deng, Jun Wu, Xinyu Shao, Research on eco-balance with LCA and LCC for mechanical product design, The International Journal of Advanced Manufacturing Technology, ISSN 0268-3768, DOI 10.1007/s00170-013-4887-z
[55] Yao Xiong, Jun Wu, Chao Deng, Yuanhang Wang, Machining process parameters optimization for heavy-duty CNC machine tools in sustainable manufacturing, The International Journal of Advanced Manufacturing Technology, ISSN 0268-3768, DOI 10.1007/s00170-013-4881-5
[56] 邓超,孙耀宗,李嵘,王远航,熊尧,基于隐Markov模型的重型数控机床健康状态评估,计算机集成制造系统-CIMS, 2013,Vol19, No.3, 552-558
[57] 马超,邓超,熊尧,吴军,一种基于混合遗传和粒子群的智能优化算法,计算机研究与发展,2012,Vol50, No.11, 2278-2286
[58] 吴军,邓超*,熊强强,赵明,基于Bootstrap与SVM集成的可靠性评估方法,计算机集成制造系统,2013,Vol.19, No.5, 1058-1063
[59] WANG, Yuanhang, Deng Chao, Wu Jun, Xiong Yao et al. Failure time prediction for mechanical device based on the degradation sequence. Journal of Intelligent Manufacturing, 2013, 1-19.
[60] Wang Yuanhang, Deng Chao, Wu Jun, Wang Yingchun, Xiong Yao. A corrective maintenance scheme for engineering equipment. Engineering Failure Analysis, 2014, 36: 269-283.
[61] C. Deng & S. Q. Xie & J. Wu & X. Y. Shao, Position error compensation of semi-closed loop servo system using support vector regression and fuzzy PID control, The International Journal of Advanced Manufacturing Technology: Volume 71, Issue 5 (2014), Page 887-898
[62] Sheng Bo ,Deng Chao, Xiong Yao, Luo Zhijun ,Wang Yuanhang. Fault Diagnosis for CNC Machine Tool based on Mapping Model. Applied Mechanics and Materials, Vol. 607 (2014) .pp 739-742
[63] Gang Lei, Chao Deng, Bo Sheng. Preventive maintenance optimization of availability for NC machine. Advanced Materials Research ,Vol. 988 (2014) ,pp 653-658