Hadfield, Mark - Bournemouth University - Department of Design & Engineering

个人简介

My current role is Deputy Dean: Research, Enterprise and Internationalisation. Since 2007 I have been in post as Deputy Dean within the School of Design, Engineering and Computing which includes the following responsibilities: Lead the development of the research, enterprise and internationalsiation profile and strategy of the School

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Saeed, A., Khan, Z., Nazir, H., Hadfield, M. and Smith, R., 2017. Research impact of conserving large military vehicles through a sustainable methodology. International Journal of Heritage Architecture, 1 (2), 267-274. Hadfield, M., anand, M., thomas, B. and Cantril, R., 2016. The depletion of ZDDP additives within marine lubricants and associated cylinder liner wear in RNLI lifeboat engines. Proc IMechE Part L:Journal of Materials: Design and Applications, 0 (Special Issue MDA2016), 1-9. Anand, M., Hadfield, M., Viesca Rodriguez, Thomas, B., González, R., Cantrill, R. and Hernández Battez, A., 2016. Assessing Boundary Film Forming Behavior of Phosphonium Ionic Liquids as Engine Lubricant Additives. Lubricants, 4. Viesca, J.L., Anand, M., Fernández-González, A., García, A. and Hadfield, M., 2016. Tribological Behaviour of PVD Coatings Lubricated with a FAP? Anion-Based Ionic Liquid Used as an Additive. Lubricants, 4. Hadfield, M., Hutchings, M., De Eyto, A. and Maher, C., 2015. A Design Research Framework to Inform Policy in Irish Higher Education. ITERATIONS: Design Research and Practice Review, 56-57. Anand, M., Hadfield, M., Viesca, J.L., Thomas, B., Hernández Battez, A. and Austen, S., 2015. Ionic liquids as tribological performance improving additive for in-service and used fully-formulated diesel engine lubricants. Wear, 334-335, 67-74. Monge, R., González, R., Hernández Battez, A., Fernández-González, A., Viesca, J.L., García, A. and Hadfield, M., 2015. Ionic liquids as an additive in fully formulated wind turbine gearbox oils. Wear, 328-329, 50-63. García, A., González, R., Hernández Battez, A., Viesca, J.L., Monge, R., Fernández-González, A. and Hadfield, M., 2014. Ionic liquids as a neat lubricant applied to steel-steel contacts. Tribology International, 72, 42-50. Tzanakis, I., Georgoulas, A., Hadfield, M. and Kotsovinos, N., 2014. Cavitation erosion damage of scroll steel plates by high-speed gas working fluid. International Journal of Computational Methods and Experimental Measurements, 2 (2), 168-183. Viesca, J.L., Garcia, A., Hernandez Battez, A., Gonzalez, R., Monge, R., Fernandez-Gonzalez, A. and Hadfield, M., 2013. FAP(-) Anion Ionic Liquids Used in the Lubrication of a Steel-Steel Contact. TRIBOLOGY LETTERS, 52 (3), 431-437. Saeed, A., Khan, Z., Hadfield, M. and Davies, S., 2013. Material Characterization and Real-Time Wear Evaluation of Pistons and Cylinder Liners of the Tiger 131 Military Tank. Tribology Transactions, 56 (4), 637-644. Hernández Battez, A., González, R., Viesca, J.L., Fernández-González, A. and Hadfield, M., 2013. Lubrication of PVD coatings with ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate. Tribology International, 58, 71-78. Tzanakis, I., Georgoulas, A., Fytanidis, D., Hadfield, M. and Kotsovinos, N., 2013. Preliminary investigation of the impact pressure from a single cavitation water bubble on a solid boundary wall, using experimental, analytical and numerical methods. 5th World Tribology Congress, WTC 2013, 1, 947-950. Awan, A.W., Hadfield, M., Thomas, B., Vieillard, C. and Cundill, R., 2013. An experimental investigation of rolling contact failure within silicon nitride subject to micro surface defects. 5th World Tribology Congress, WTC 2013, 2, 1142-1145. Tzanakis, I., Conte, M., Hadfield, M. and Stolarski, T.A., 2013. Experimental and analytical thermal study of PTFE composite sliding against high carbon steel as a function of the surface roughness, sliding velocity and applied load. Wear, 303 (1-2), 154-168. Tzanakis, I., Georgoulas, A., Hadfield, M. and Kotsovinos, N., 2012. Cavitation erosion behaviour of the steel plate of a scroll expander system. WIT Transactions on Engineering Sciences, 76, 129-137. Faisal, N.H., Ahmed, R., Fu, Y.Q., Hadfield, M. and Alhoshan, M., 2012. DLC thin film behaviour during multiple-cycle repeating nano-indentation. WIT Transactions on Engineering Sciences, 76, 43-54. Tzanakis, I., Hadfield, M. and Henshaw, I., 2012. Observations of acoustically generated cavitation bubbles within typical fluids applied to a scroll expander lubrication system (vol 35, pg 1544, 2011). EXPERIMENTAL THERMAL AND FLUID SCIENCE, 42, 265-270. Tzanakis, I., Hadfield, M. and Henshaw, I., 2012. Erratum to - 'Observations of acoustically generated cavitation bubbles within typical fluids applied to a scroll expander lubrication system' [Experimental Thermal and Fluid Science 35 (8) (2011) 1544-1554]. Experimental Thermal and Fluid Science, 42, 265-270. Tzanakis, I., Hadfield, M., Thomas, B., Noya, S.M., Henshaw, I. and Austen, S., 2012. Future perspectives on sustainable tribology. Renewable and Sustainable Energy Reviews, 16 (6), 4126-4140.