近期论文
查看导师最新文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Davenport, P., Noroozi, S., Sewell, P. and Zahedi, S., 2017. Systematic review of studies examining transtibial prosthetic socket pressures with changes in device alignment. Journal of Medical and Biological Engineering.
Okhotnikov, I., Noroozi, S., Sewell, P. and Godfrey, P., 2016. Evaluation of steady flow torques and pressure losses in rotary flow control valve by means of computational fluid dynamics. International Journal of Heat and Fluid Flow.
Hawkins, J., Noroozi, S., Dupac, M. and Sewell, P., 2016. Development of a Wearable Sensor System for Dynamically Mapping the Behavior of an Energy Storing and Returning Prosthetic Foot. Measurement Science Review, 16 (3), 174-182.
Thomas, B., sewell, P., Khan, Z., Balmain, S. and Gillman, J., 2016. Current tidal power technologies and their suitability for applications in coastal and marine areas. Journal of Ocean Engineering and Marine Energy, 2 (2), 227-245.
ASLANI, N., NOROOZI, S., HARTLEY, R., DUPAC, M. and SEWELL, P., 2016. ASSESMENT OF KEY PARAMETERS ON THE PERFORMANCE OF THE DELTOID MUSCLE IN REVERSE SHOULDER ARTHROPLASTY — A MODELING AND SIMULATION-BASED STUDY. Journal of Mechanics in Medicine and Biology.
Dyer, B., Sewell, P. and Noroozi, S., 2014. Sprinting with an amputation: some race-based lower-limb step observations. Prosthetics and Orthotics International.
Noroozi, S., Rahman, A., Yee, K., Zahedi, S., Sewell, P., Dyer, B. and Chao, O., 2014. The dynamic elastic response to impulse synchronisation of composite prosthetic energy storing and returning feet. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology, 228 (1), 24-32.
Dyer, B., Sewell, P. and Noroozi, S., 2014. An Investigation into the Measurement and Prediction of Mechanical Stiffness of Lower-limb Prostheses used for Running. Assistive Technology, 26, 157-163.
Noroozi, S., Sewell, P. and Vinney, J.E., 2014. Investigation of bolt group configurations on load distribution and joint failure. Mechanics of Advanced Materials and Structures, 21 (5), 422-432.
Reza Ramazani, M., Sewell, P., Noroozi, S., Khanadan, R. and Cripps, B., 2013. Using artificial neural networks and strain gauges for the determination of static loads on a thin square fully constrained composite marine panel subjected to a large central displacement. Insight (Northampton): non-destructive testing and condition monitoring, 55 (8), 442-448.
Noroozi, S., Sewell, P., Rahman, A.G.A., Vinney, J., Zhi Chao, O. and Dyer, B.T.J., 2013. Performance Enhancement of Bi-lateral Lower-limb Amputees in the Latter Phases of Running Events: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology, 227 (2), 105-115.
Dyer, B., Sewell, P. and Noroozi, S., 2013. How should we assess the mechanical properties of lower-limb prosthesis technology used in elite sport?—An initial investigation. Journal of Biomedical Science and Engineering, 6, 116-123.
Ramazani, M., Noroozi, S., Koohgilani, M., Cripps, B. and Sewell, P., 2013. Determination of in-service load on a marine composite panel utilising Artificial Intelligence. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 227 (1), 12-21.
Khandan, R., Noroozi, S., Sewell, P., Vinney, J. and Koohgilani, M., 2013. A Semi-Analytical Model for Deflection Analysis of Laminated plates with the Newton-Kantorovich-Quadrature Method. Materials Research - Ibero-american Journal of Materials, 16 (1).
Khandan, R., Sewell, P., Noroozi, S. and Reza Ramazani, M., 2013. FE Design Tool for Laminated Composite Plates. Applied Mechanics and Materials, 248, 379-383.
Reza Ramazami, M., Sewell, P., Noroozi, S., Koohgilani, M. and Cripps, B., 2013. Sensor Optimisation for In-service Load Measurement of a Large Composite Panel Under Small Displacement. Applied Mechanics and Materials, 248, 153-161.
Reza Ramazani, M., Sewell, P., Noroozi, S., Koohgilani, M. and Cripps, B., 2013. In-service Transient Load Measurement on a Large Composite Panel. Applied Mechanics and Materials, 248, 204-211.
Noroozi, S., Sewell, P., Vinney, J., Dyer, B.T.J., Rahman, A.G.A. and Zhi Chao, O., 2013. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology, 227 (1), 39-48.
Vinney, J., Noroozi, S., Rahman, A.G.A., Sewell, P., Zhi Chao, O., Kuan, K.K. and Dupac, M., 2012. Analysis of Composite Prosthetic Energy-Storing-and-Returning (ESR)feet: A comparison between FEA and the experimental analysis. International Journal of COMADEM, 15 (3), 19-28.
Romouzy-Ali, A., Noroozi, S., Sewell, P. and Humphries-Smith, T., 2012. Adopting rapid prototyping technology within Small and Medium-Sized Enterprises: The differences between reality and expectation. International Journal of Innovation, Management and Technology, 3 (4), 427-432.