Strangwood, Martin - University of Birmingham - School of Metallurgy and Materials

个人简介

Martin Strangwood gained his BA (later MA) in 1984 and his PhD in 1988 both from Cambridge University. His PhD was on Prediction and Assessment of Weldmetal Microstructures, an area that he continued for the following 3 years whilst at AEA Harwell working on a variety of projects including the Sizewell B safety case. During his time at Harwell he also acted as a tutor for the Open University. He joined the School of Metallurgy and Materials at Birmingham in 1990 and has since supervised 53 PhDs and 8 Masters projects

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Yin, W., Peyton, A. J., Strangwood, M. & Davis, C. L., (2007), Exploring the Relationship between Ferrite Fraction and Morphology and the Electromagnetic Properties of Steel, J. Mat. Sci., 42: 6854-6861. Chakrabarti, D., Davis, C. L. & Strangwood, M., (2007), Characterisation of Bimodal Grain Structures in HSLA-Steel, Materials Characterization, 58: 423-428. Attallah, M. M., Davis, C. L. & Strangwood, M., (2007), The Influence of the Base Metal Microstructure on the Microstructural Development in Aluminium Alloys Friction Stir Welds, Science and Technology of Welding and Joining, 12: 361-369. Bose-Filho, W. W., Carvalho, E. L. M. & Strangwood, M., (2007), Effects of Alloying Elements on the Microstructure and Inclusion Formation in HSLA Multipass Welds, Materials Characterization, 58: 29-39. Attallah, M. M., Davis, C. L. & Strangwood, M., (2007), Microstructure-microhardness Relationships in Friction Stir Welded AA5251, J. Mat. Sci., 42: 7299-7306. Strangwood, M., (2008), Sporty Polymers, Materials World, 16(6): 26-27. Davis, C. L., Strangwood, M., Potter, M., Dixon, S. & Morris, P. F., (2008), Prediction of Elastic Modulus + Anisotropy using X-ray and Electron Backscattered Diffraction Texture Quantification and Ultrasonic (Electromagnetic Acoustic Transducer) Measurements in Aluminium Sheets, Metall. Mater. Trans, 39A(3): 679-687 Chakrabarti, D., Davis, C. L. & Strangwood, M., (2008), Development of Bimodal Grain Structures in Nb-containing High Strength Low Alloy Steels during Slab Reheating, Metall. Mater. Trans, 39A(8): 1963-1977. Hao, X. J., Yin, W., Strangwood, M., Peyton, A. J., Morris, P. F. & Davis, C. L., (2009), Characterisation of Decarburisation of Steels using a Multi-frequency Electromagnetic Sensor: Experiment and Modelling, Metall. Mater. Trans, 40A(4): 745-756. Chakrabarti, D., Davis, C. L. & Strangwood, M., (2009), Effect of Bimodal Grain Size Distribution on the Scatter in Toughness, Metall. Mater. Trans A, 40A(4): 780-795. Kostryzhev, A. G., Strangwood, M. & Davis, C. L., (2009), Bauschinger Effect in Nb- and V-alloyed Line-pipe Steels, Ironmaking and Steelmaking, 36(3): 186-192. Chakrabarti, D., Davis, C. L. & Strangwood, M., (2009), Effect of Deformation and Nb Segregation on Grain Size Bimodality in HSLA Steel, Mats Sci. Tech., 25(8): 939-946. Davis, C. L. & Strangwood, M., (2009), Segregation Behaviour in Nb-microalloyed Steels, Mat. Sci. Tech., 25(9): 1126-1133. Kundu, A., Davis, C. L. & Strangwood, M., (2010), Modeling of Grain Size Distributions during Single Hit Deformation of a Nb-containing Steel, Metall. Mater. Trans A, 41A(4): 994-1002. Hao, X.J., Yin, W., Strangwood, M., Peyton, A. J., Morris, P. F. & Davis, C. L., (2010), Modelling the Electromagnetic Response of Two-phase Steel Microstructures, NDT & E International, 43: 305-315. Attallah, M.M., Strangwood, M. & Davis, C. L., (2010), Influence of the heating rate on the initiation of primary recrystallization on a deformed Al-Mg alloy, Scripta Mater., 63(4): 371-374. Kostryzhev, A. G., Strangwood, M. & Davis, C. L., (2010), Bauschinger Effect in Microalloyed Steels: Part 1. Dependence on Dislocation-Particle Interaction, Metall & Mater. Trans A, 41A(6): 1399-1408. Kundu, A., Davis, C. L. & Strangwood, M., (2010), Grain Structure Development during Reheating and Deformation of Niobium-microalloyed Steels, Materials and Manufacturing Processes, 25: 125-132. Wang, L., Strangwood, M., Balint, D., Lin, J. & Dean, T. A., (2010), Formability and Failure Mechanisms of AA2024 under Hot Forming Conditions, Mats Sci. Engg A, 528(6): 2648-2656. Slater, C.S., Otto, S. R. & Strangwood, M., (2010), The Quasi-static and Dynamic Testing of Damping in Golf Club Shafts Fabricated from Carbon Fibre Composites, Procedia Engineering, 2(2): 3361-3366.