Ponton, Clive - University of Birmingham - School of Metallurgy and Materials

个人简介

Clive Ponton graduated with a BSc(Eng) and ARSM in Metallurgy and Materials from Imperial College London in 1983. He went on to do postgraduate research on the Mechanical Properties of Glass-Ceramics in the System CaO-MgO-Al2O3-SiO2 and in 1987 was awarded a PhD and DIC from Imperial College/University of London, as well as the 1987 Matthey Prize by the Department of Materials (Imperial College London) for the best PhD thesis. In 1987, he was also directly elected as a Member of the Institute of Ceramics (MICeram) [Institute of Ceramics now subsumed into IMMM]. Clive carried out postdoctoral research as an EPSRC Research Fellow for from 1987 to 1989, working on the development of new bioactive apatite-containing glass-ceramics. In 1989, he was appointed as a Lecturer in Ceramic Engineering in the School of Metallurgy and Materials at the University of Birmingham. In 1990, Clive was awarded the Pfeil Medal and Prize (co-awardee, Prof. RD Rawlings) for published work of particular merit in the field of ceramics, and also conferred Professional Membership of IOMMM (MIMMM) and Chartered Engineer (CEng) status. In 1996, he was promoted to Senior Lecturer in the School of Metallurgy and Materials at the University of Birmingham.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

"Investigation into the wear behaviour of Tribaloy 400C during rotation as an unlubricated bearing at 600 °C" Wood, PD; Evans, HE; Ponton, CB. WEAR 269, [11-12], (2010), pp763-769. "Oxidation of SiC powders for the preparation of SiC/mullite/alumina nanocomposites" He, JY and Ponton, CB. JOURNAL OF MATERIALS SCIENCE, 43, [12], (2008), pp4031-4041. “Silica glass segregation in 3 wt% LiF-Doped hot-pressed Y2Si2O7” MacLaren, I; Schierholz, R; Trusty, PA; Ponton, CB. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 90, (2007), pp 3307-3310. “A study of Sm-substituted SrM magnets sintered using hydrothermally synthesised powders” Wang, JF; Ponton, CB; Harris, IR. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 298, [2], (2006), pp122-131. “A study of Pr-substituted strontium hexaferrite by hydrothermal synthesis” Wang, JF; Ponton, CB; Harris, IR. JOURNAL OF ALLOYS AND COMPOUNDS, 403, [1-2], (2005), pp104-109. “Control of the particle size and morphology of hydrothermally synthesised lead zirconate titanate powders” Su, B; Button, TW; Ponton, CB. JOURNAL OF MATERIALS SCIENCE, 39, [21], (2004), pp 6439-6447. “A method of heat-treatment of near gamma-TiAl to enhance oxidation resistance by the formation of a Ti5Si3 layer” Gray, S; Jacobs, MH; Ponton, CB, et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 384, [1-2], (2004), pp77-82. “Processing of Al2O3/SiC nanocomposites - part 1: aqueous colloidal processing” Timms , LA ; Ponton, CB. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 22, [9-10], (2002), pp1553-1567. “Processing of Al2O3/SiC nanocomposites - part 2: green body formation and sintering” Timms , LA ; Ponton, CB; Strangwood, M. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 22, [9-10], (2002), pp1569-1586. “Hydrothermal processing and characterisation of doped lanthanum chromite for use in SOFCs. Ovenstone, J; Chan, KC; Ponton, CB. JOURNAL OF MATERIALS SCIENCE, 37, [15], (2002), pp3315-3322. “Ultrafine SrM particles with high coercivity by chemical coprecipitation” Wang, JF; Ponton, CB; Harris, IR. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 242, [2], (2002), pp1464-1467 “Emulsion processing as a novel route to cordierite” Chan, KC; Ovenstone, J; Ponton, CB. JOURNAL OF MATERIALS SCIENCE, 37, [5], (2002), pp971-976.