Kukureka, Stephen - University of Birmingham - School of Metallurgy and Materials

个人简介

2012 – Deputy Head, School of Metallurgy and Materials, University of Birmingham 2001 – (present) Senior Lecturer in Metallurgy and Materials, University of Birmingham 1990 – 2001 Lecturer in Metallurgy and Materials, University of Birmingham 1987 - 1989 Senior Lecturer in Polymer Engineering, Polytechnic of North London 1983 - 1987 Research Engineer, Polymer Group, Dept of Physics, University of Leeds 1981 - 1983 Technical Officer, R & D Plastics Section, IMI plc, Witton, Birmingham

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

D W Mohammed, R Waddingham, A J Flewitt, K A Sierros, J Bowen, S N Kukureka, ‘Mechanical properties of amorphous indium-gallium-zinc oxide thin films on compliant substrates for flexible optoelectronic devices’, Thin Solid Films, 594, 197-204 (2015). A Mahomed, D W L Hukins, S N Kukureka, ‘Effect of accelerated aging on the viscoelastic properties of a medical grade silicone’, Bio-Medical Materials and Engineering, 25, 415-423 (2015). T J Hoskins, K D Dearn, Y K Chen, S N Kukureka, ‘The wear of PEEK in rolling-sliding contact – simulation of polymer gear applications’, Wear, 309, 35-42 (2014). S A Samsudin, S N Kukureka, M J Jenkins, ‘The equilibrium melting temperature and isothermal crystallisation kinetics of cyclic poly(butylene terephthalate) and styrene maleimide (c-PBT/SMI) blends, Journal of Thermal Analysis and Calorimetry, 114, 1307-1315 (2013). N Metje, A M Kolonko, D N Chapman, D Cheneler, S N Kukureka, ‘Methodology for the Preparation of Polymer Samples Containing Silicon Microchips for Mechanical Testing’, Polymer-Plastics Technology and Engineering, 52, 461-471 (2013). G A Potoczny, T S Bejitual, J S Abell, K A Sierros, D R Cairns, S N Kukureka, ‘Flexibility and electrical stability of polyester-based device electrodes under monotonic and cyclic buckling conditions’, Thin Solid Films, 528, 205-212 (2013). T S Bejitual, D Compton, K A Sierros, D R Cairns, S N Kukureka, ‘Electromechanical reliability of flexible transparent electrodes during and after exposure to acrylic acid’, Thin Solid Films, 528, 229-236 (2013). A M Kolonko, N Metje, D N Chapman, S N Kukureka, ‘ Impact of Millimetre Size Silicon Microchips on the Mechanical Properties of Polymer Samples Tested under Flexural Bending, Long-Term Creep and Impact Conditions’, Journal of Pipeline Systems Engineering and Practice, 4, 115-123 (2013). A M Kolonko, N Metje, D N Chapman, S N Kukureka, ‘Tensile properties of polymer samples containing millimetre scale silicon microchips’, Polymers and Polymer Composites, 20, 505-516 (2012). S A Samsudin, S N Kukureka, M J Jenkins, ‘Miscibility in cyclic poly (butylene terephthalate) and styrene maleimide (c-PBT/SMI) blends prepared by solid-dispersion and in situ polymerisation of cyclic butylene terephthalate oligomers (CBT) within SMI’, Journal of Applied Polymer Science, 126, SI2, E290-E297 (2012). C L Davis, S N Kukureka, ‘Effect of materials and manufacturing on the bending stiffness of vaulting poles’, Physics Education, 47, 524-529 (2012). A J Kessman, S N Kukureka, D R Cairns, ‘Tribology of non-wetting, fluorinated, mesoporous silica films’, Wear, 271, 2144-2149 (2011). K A Sierros, T S Bejitual, S Cronin, A J Kessman, S N Kukureka, D R Cairns, ‘Tribo-corrosion of Ag and Ag-alloy ITO multilayers used in solar energy applications’, Wear, 271, 1438-1444 (2011). T J Hoskins, K D Dearn, S N Kukureka, D Walton, ‘Acoustic noise from polymer gears: a tribological investigation’, Materials and Design, 32, 3509-3515 (2011). A Mahomed, D W L Hukins, S N Kukureka, D E T Shepherd, ‘Effect of accelerated aging on the viscoelastic properties of Elast-Eon?: a polyurethane with soft poly(dimethylsiloxane) and poly(hexamethylene oxide) segments’, Materials Science and Engineering C 30, 1298-1303, (2010). A Mahomed, D W L Hukins, S N Kukureka, ‘Swelling of medical grade silicones in liquids and calculation of their cross-link densities’, Medical Engineering and Physics, 32, 298-303 (2010). K A Sierros, D R Cairns, J S Abell, S N Kukureka ‘Pulsed laser deposition of indium tin oxide films on flexible polyethylene naphthalate display substrates at room temperature’, Thin Solid Films, 518, 2623-2627 (2010). A Mahomed, D W L Hukins, S N Kukureka, Viscoelastic properties of Silastic? medical-grade silicones: Implications for finger-joint replacement’, Journal of Polymer Materials, 26, 389-399, (2009). K A Sierros and S N Kukureka, ‘Mechanical integrity of touch-screen components’, Journal of the Society of Information Display, 17, 947-952 (2009). A Mahomed, N M Chidi, D W L Hukins, S N Kukureka, D E T Shepherd, ‘Frequency dependence of viscoelastic properties of medical grade silicones’, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 89B, 210-216 (2009).