个人简介
Past President, Birmingham Metallurgical Association
2010: Chairman, Technical Advisory Group on Structural Integrity (member since 1988)
From 2006: member of Defence Nuclear Safety Committee
2003/4 Acting Chair, Nuclear Safety Advisory Committee
From 2003: member of Graphite Technical Advisory Committee
From 2003: member of (MoD) Research Programmes Group
From 2003: Editor, Materials Science and Technology
From 2000: Chairman Rolls-Royce Materials, Manufacturing and Structures Advisory Board (member since 1989)
President, International Congress on Fracture, 1993-97
From 1988: member of TWI Research Board
研究领域
Relationships between the microstructures and mechanical properties of a wide range of engineering alloys and other structural materials
Fracture, fatigue and embrittlement in metals
High temperature properties of materials
Environmentally-assisted fracture
Behaviour of weldments and composites
Effects of residual stress on fracture and fatigue processes
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Balart, M.J. and Knott, J.F. “Effects of Geometry and Flow Properties on the Fracture Toughness of a C-Mn Reactor Pressure Vessel Steel in the Lower Shelf Region” Intl. Jnl. Press. Vess. And Piping, Vol. 83, pp 205-215, 2006.
Knott, J.F. “Deterministic and Probabilistic Modelling of Brittle Fracture Mechanisms in Ferritic Steels”, Fat. And Fract. Eng. Matls. And Struct, Vol. 29, pp 714-724, 2006.
Wu, S.J. Ding, R. and Knott, J.F. “Statistical Analysis of Phosphorus Segregation on Intergranular Fracture Facets in Pressure Vessel Steels” in press, Materials Science and Technology, 2007
Bhattacharjee, D. and Knott, J.F. “A critical shear displacement criterion for ductile-brittle transition under mixed mode I and II loading ” Materials Science and Technology, Vol 23, pp 1269-1277, 2007
Balart, M.J. and Knott J.F. “Simulated Coarse-Grained Heat-Affected-Zone Microstructures in DIN22NiMoCr37 Steel”, Journal of Nuclear Materials, Vol. 361, pp 112-120. 2007
Knott, J.F. “Local approach concepts and the microstructures of steels” Eng. Fract. Mech. Vol.75, pp 3560-9, 2008
Balart, M.J. and Knott, J.F. “Low Temperature Fracture Properties of DIN 22NiMoCr37 Steel in Fine Grained Bainite and Coarse Grained Tempered Embrittled Martensite Microstructures” Eng. Fract. Mech. Vol. 75, pp 2480-2513, 2008
Knott, J.F. “Quantifying the Quality of Steel” Ironmaking and Steelmaking Vol. 35, pp 264-282, 2008
Eason, E.D. Hall, G. Heys, G.B. Knott, J.F. Marsden, B.J. Preston, S.D. and Swan, T. “The Origins and Use of the Equivalent Temperature Concept” Journal. of Nuclear Materials. Vol. 381, pp 106-113, 2008
Knott, J.F. “Energy – Materials and Mechanisms” Energy Materials Vol.3 pp 11-19, 2008
Knott, J.F. and Lidbury, D.P.G. “Views of TAGSI on effects of neutron irradiation on ductile tearing in ferritic steels” Intl. Jnl. Press. Vess. and Piping Vol 86, pp 395-402, 2009
Balart M.J. and Knott J.F. “Micro-alloying design for Nuclear reactor pressure vessel (RPV) Steels” in “Nuclear Reactors, Nuclear Fission and Fusion Engineering” ed. A. Aasen and P. Olsson, Nova Science Publishers Inc. Chapter 5, July 2009 ISBN: 978-1-60692-508-9.
Aratani, M. and Knott J.F. “The growth of short fatigue cracks ahead of a notch in high strength steel” Eng. Fail. Anal. Vol. 17, pp 200-207, 2010.
Knott, J.F. “Fracture Resistance in Aluminium” in “Fundamentals of Aluminium Metallurgy – Production, Processing and Applications”, ed. Roger Lumley, Woodhead Publishing 2011 pp 538-57