Griffiths, Bill - University of Birmingham - School of Metallurgy and Materials

个人简介

This has included positions at Foseco International working in light alloys, and Nottingham University researching the application of electromagnetic stirring to DC cast Al. Most recently Dr. Griffiths was the Federal-Mogul Senior Research Fellow at UMIST, researching interfacial heat transfer in light alloy and ferrous casting, before moving to the University of Birmingham as a Lecturer

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Hallam C. P. and Griffiths W. D. (2004) “Interfacial heat transfer in the aluminium gravity die casting process”, Met. and Mat. Trans. B, vol. 35B, 721-733. Raeiszadeh R. and Griffiths W. D., (2006) “A method to study the history of a double oxide film defect in liquid aluminium alloys”, Met. And Mat. Trans. B, vol. 37, 865-871. Griffiths W. D., Cox M., Campbell J. and Scholl G. (2007) “The influence of counter-gravity mould filling on the reproducibility of the mechanical properties of a low alloy steel”, Mat. Sci. Technol., vol. 23, 137-144. Griffiths W. D. and Lai N-W, (2007) “Double oxide film defects in cast magnesium alloy”, Met. and Mat. Trans. A, vol. 38A, 190-196. Raiszadeh R. and Griffiths W. D. (2008) “A semi-empirical mathematical model to estimate the duration of the atmosphere within a double oxide film defect in pure aluminium alloy”, , Met. and Mat. Trans. B, vol. 39B, 298-303. Griffiths W. D., Beshay Y., Parker D. J. and Fan X., (2008) “The determination of inclusion movement in steel castings by Positron Emission Particle Tracking (PEPT)”, J. Mat. Sci., vol. 43, 6853-6856. Griffiths W. D. and Raiszadeh R.. “Hydrogen, porosity and oxide film defects in liquid Al” (2009), J. Mat. Sci., vol. 44, 3402-3407. Griffiths W. D., Parker D. J., Fan X. andHausard M. (2010), “Tracking inclusions in aluminium alloy castings using Positron Emission Particle Tracking (PEPT)”, Mat. Sci. Technol., vol. 26, 528-533. Griffiths W. D. and Kawai K., (2010), “The effect of increased pressure on the interfacial heat transfer during solidification of aluminium alloy die castings”, J. Mat. Sci., vol. 45, 2330-2339. Raiszadeh R. and Griffiths W. D., (2010) “The behaviour of double oxide film defects in liquid Al alloys under atmospheric and reduced pressures”, J. Alloys and Compounds, vol. 491, 575-580