Dong, Hanshan - University of Birmingham - School of Metallurgy and Materials

个人简介

Hanshan Dong received his BSc degree in Materials Science and Engineering from Shanghai University, China in 1983 and his MPhil degree in Tribology from Dong-Hua University, Shanghai, China in 1986. Prior to commencing his PhD studies in Surface Engineering at the University of Birmingham in 1992, he had been a lecturer and then senior lecturer at the prestigious Dong-Hua University, Shanghai, China for 6 years. Following 8 years of PhD studies and postdoctoral research at the University of Birmingham, he became a Lecturer in 2000 and was promoted to Senior Lecturer in 2005, Reader in 2007 and Professor in 2010

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Ruset C., Grigore E., Li X., Dong H.: ‘Synthesis and characterization of W reinforced carbon coatings produced by combined magnetron sputtering and ion implantation technique’, Thin Solid Films, Available online 9 Feb 2011 (doi: 10.1016/j.tsf.2011.01.376). Dong Y., Li X., Tian L., Bell T., Sammons R.L., Dong H. (2011): ‘Towards long-lasting antibacterial stainless steel surfaces by combining double glow plasma silvering with active screen plasma nitriding’, Acta Biomaterialia, 7(1), 447-457 Li X., Wu W., and Dong H. (2011): ‘Microstructural characterisation of carbon doped CrAlTiN coatings’, Surface and Coatings Technology, 205(10), 3251-3259 Corujeira Gallo S. and Dong H. (2011): Corrosion behaviour of DC and AS plasma carburised 316 ASS in boiling H2SO4 solutions, Corrosion Engineering, Science and Technology, 46, 8-16 Chen J., Bell G., Beake B. and Dong H. (2010): ‘Nano-mechanical & tribological properties of a-C:H/TiCN/TiN coating under sub-ambient temperatures’, International Journal of Engineering Systems Modelling and Simulation,2, 199-203 Dong H. (2010): ‘Guest editorial: in memory of Tom Bell’, Surface Engineering, 26, 1-10. Li X. Y., Buhagiar J. and Dong H. (2010), ‘Characterisation of dual S phase layer on plasma carbonitrided biomedical austenitic stainless steels’, Surface Engineering, 26, 67-73. Ji R., Li X. and Dong H. (2010), ‘Ceramic conversion treatment of Zr702 and Zr705 to combat wear’, Surface Engineering, 26, 30-36. Dong H. (2010): ‘S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys’, International Materials Review, 55, 65–98 Grigore E., Ruset Li C., X., Dong H. (2010): ‘Zirconium carbonitride films deposited by combined magnetron sputtering and ion implantation (CMSII)’, Surface and Coatings Technology, 204, 1889- 1892 Grigore E., Ruset C., Li X., Dong H. (2010): ‘The influence of carbon content on the characteristics of V-C-N coatings deposited by combined magnetron sputtering and ion implantation (CMSII), Surface and Coatings Technology, 204, 2006-2009 Dong Y.C., Li X., Simon R. and Dong H. (2010), ‘The generation of wear-resistant antimicrobial stainless steel surfaces by active screen plasma alloying with N and nanocrystalline Ag’, Journal of Biomedical Materials Research Part B, 93B, 185-193 Yu B, Qian L., Zhou Z., Yu J, Dong H. and Zhou Z. (2010), ‘Friction-induced hillocks on monocrystalline silicon in atmosphere and in vacuum, Wear,268, 1095-1102 Grigore E., Ruset C., Li X. and Dong H. (2010): ‘Synthesis and characterization of (C, N)-alloyed stainless steel coatings by high energy ion assisted magnetron sputtering deposition’, Materials and Manufacturing Processes, 25, 341-344. Chen J., Li X. and Dong H. (2010), ‘Formation and characterisations of S-Phase in plasma carburised high-carbon Stellite 21 CoCr alloy’, Surface Engineering, 26, 233-241 Buhagiar J., Dong H. (2010), Low temperature plasma carbonitriding of ASTM F138 and ASTM F1586 biomedical stainless steels, Surface Engineering, 26, 256-264 Buhagiar J., Qian L. and Dong H. (2010),:‘Surface property enhancement of Ni-free medical grade austenitic stainless steel by low-temperature plasma carburising’,Surface and Coatings Technology, 205, 388-395. Dong Y., Li X., Bell T., Sammons R. and Dong H. (2010): ‘Surface microstructure and antibacterial property of active-screen plasma alloyed austenitic stainless steel surface with Cu and N’, Biomedical Materials, 5054105 (8pp) Kaklamani G., Mehrban N., Chen J., Bowen J., Dong H., Grover L. and Stamboulis A. (2010): ‘Effect of plasma surface modification on the biocompatibility of UHMWPE’, Biomedical Materials, 5 054102 (10pp) Chen J., Bell G. A., Dong H., Smith J. F. and Beake B. D. (2010): A study of low temperature mechanical properties and creep behaviour of polypropylene using a new sub-ambient temperature nanoindentation test platform’, J Appl Physics D Applied Physics, 43 425404(9pp)