当前位置: X-MOL首页全球导师 海外导师 › Connolly, Brian

个人简介

Dr Connolly was awarded a BS in Materials Engineering from the Georgia Institute of Technology in 1992. He went on to complete his MS and PhD degrees in Materials Science from the University of Virginia before joining the faculty of the US Naval Academy as a Research Professor in 2001. Dr Connolly was awarded a Royal Society Research Fellowship in 2003 and served as a Visiting Lecturer and Visiting Academic Staff at the University of Birmingham and the University of Manchester (UMIST), respectively, until 2006. Dr Connolly joined the academic staff in the School of Metallurgy and Materials at the University of Birmingham in 2006 as a Lecturer and was subsequently promoted to Senior Lecturer in 2011. Prior to his academic career, Dr Connolly gained valuable experience working for Mobil Exploration & Producing US as a Corrosion Engineer supporting oil and gas production in the Gulf of Mexico

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

D. Saxey, B. Connolly, C. Cooper, J. Knott, Y. Huang, C. Grovenor, G. Smith, S. Lyon, A. Sherry, L. Roswell, A. Pratt, “Understanding Stress Corrosion Cracking of PGM-Doped Stainless Steels Utilising the Latest Generation of Atom Probe,” submitted to Nature Materials 2011 D.A. Horner, B.J. Connolly, S. Zhou, L. Crocker, A. Turnbull, “Novel Images of the Evolution of Stress Corrosion Cracks from Corrosion Pits,” accepted Corrosion Science, 2010 M. Jariyaboon, A.J. Davenport, R. Ambat, B.J. Connolly, S.W. Williams, D.A. Price, “Corrosion behaviour of banded microstructure within nugget of friction stir welds in AA2024-T351,” Materials Science and Technology, 27(1), 208-213 (2011) M. Jariyaboon, A.J. Davenport, R. Ambat, B.J. Connolly, S.W. Williams, D.A. Price, “Effect of Cryogenic Cooling on Corrosion of Friction Stir Welded AA7010-T7651,” Anti-Corrosion Methods and Materials, 57(2), 83-89 (2010) M. Jariyaboon, A.J. Davenport, R. Ambat, B.J. Connolly, S.W. Williams, D.A. Price, “The Effect of Cryogenic CO2 Cooling on Corrosion Behaviour of Friction Stir Welded AA2024-T351,” Corrosion Engineering, Science and Technology, 44(6), 425-432 (2009) R.W. Fonda, P.S. Pao, H.N. Jones, C.R. Feng, B.J. Connolly, A.J. Davenport, “Microstructure, Mechanical Properties, and Corrosion of Friction Stir Welded Al 5456,” Materials Science & Engineering A, 519, 1-8 (2009) A. Turnbull, D.A. Horner, B.J. Connolly, “Challenges in Modelling the Evolution of Stress Corrosion Cracking from Pits,” Engineering Fracture Mechanics, 76, 633-640 (2009) P.G. Padovani, A.J. Davenport, B.J. Connolly, S.W. Williams, A. Groso, M. Stampanoni, F. Bellucci, ‘Corrosion and Protection of Friction stir Welds in Aerospace Aluminium Alloys,’ Metallurgia Italiana, 10, 29-42 (2008) F. Eckermann, T. Suter, P.J. Uggowitzer, A. Afseth, A.J. Davenport, B.J. Connolly, M. Larson, F. de Carlo, P. Schmutz, “In-Situ Monitoring of Corrosion Processes within the bilk of AlMgSi Alloys using X-ray microtomography,” Corrosion Science, 50, 3455-3466 (2008) T.J. Marrow, L. Babout, B.J. Connolly, D. Engelberg, G. Johnson, J. –Y. Buffiere, P.J. Withers and R.C. Newman, “High Resolution, in-situ, tomographic observations of stress corrosion cracking,” in Environment-Induced Cracking of Materials: Volume 2 – Prediction, Industrial Developments and Evaluation, edited by S.A. Shipilov, R.H. Jones, J. –M. Olive, and R.B. Rebak, Elsevier Ltd., Oxford, UK, 439-448 (2008) M. Jariyaboon, A.J. Davenport, R. Ambat, B.J. Connolly, S.W. Williams, D.A. Price, “The Effect of Welding Parameters on the Corrosion Behaviour of Friction Stir Welded AA2024-T351,” Corrosion Science, 49, 877 (2007) D.A. Little, B.J. Connolly, J.R. Scully, “An Electrochemical Framework to Explain the Intergranular Stress Corrosion Behavior in Two Al-Cu-Mg-Ag Alloys as a Function of Aging,” Corrosion Science, 49, 347 (2007) A.J. Davenport, C. Padovani, B.J. Connolly, N.P.C. Stevens, T.A.W. Beale, A. Groso, M. Stampanoni, “Synchrotron X-ray Microtomography Study of the Role of Y in Corrosion of Magnesium Alloy WE43,” Electrochemical and Solid State Letters, 10(2), C5-C8 (2007) B.J. Connolly, D.A. Horner, S.J. Fox, A.J. Davenport, C. Padovani, S. Zhou, A. Turnbull, M. Preuss, N.P. Stevens, T.J. Marrow, J.-Y. Buffiére, E. Boller, A. Groso, M. Stampanoni, “X-ray Microtomography Studies of Localised Corrosion and Transitions to Stress Corrosion Cracking,” Materials Science and Technology, 22(9), 1076-85 (2006) B.J. Connolly, “Ch 15: Effects of Applied Stress on Localised Corrosion of Aluminium Alloy Friction Stir Welds,” in Local Probe Techniques for Corrosion Research (EFC 45), edited by R. Oltra, Woodhead Publishing Limited, Cambridge, UK, 155-166 (2007) M. Jariyaboon, A.J. Davenport, R. Ambat, B.J. Connolly, S.W. Williams, D.A. Price, “Corrosion Behaviour of a Dissimilar Friction Stir Weld Joining High Strength Aluminium Alloys 2024 and 7010,” Corrosion Engineering, Science and Technology, 41(2), 135-142 (2006) B.J. Connolly, J.R. Scully, “The Transition from Localized Corrosion to Stress Corrosion Cracking in an Al-Li-Cu-Ag Alloy,“ Corrosion, 61(12), 1145-1166 (2005) B.J. Connolly, M.G. Koul, A.L. Moran, “A Comparison Study of Stress Corrosion Crack Growth Rates for AA7xxx Alloys as a function of Bulk Aqueous Chloride Concentrations,” Corrosion, 61(10), 976-986 (2005) B.J. Connolly, Q. Meng, A.L. Moran, R.L. McCaw, “Mechanical and Precorroded Fatigue Properties of Coated Aluminum Aircraft Skin System as a Function of Various Thermal Spray Processes,” Corrosion Engineering, Science and Technology, 39(2), 137-142 (2004) B.J. Connolly, K.L. Deffenbaugh, M.G. Koul, A.L. Moran, “Environmentally Assisted Crack Growth Rates of High Strength Aluminum Alloys,” Journal of Metals, 55(1), 42-52 (2003). (Invited paper) C.P. Ferrer, M.G. Koul, B.J. Connolly, A.L. Moran, “Improvements in Strength and Stress Cracking Properties in Aluminum Alloy 7075 Via Low Temperature Retrogression and Re-Aging Heat Treatments,” Corrosion, 59(6), 520-528 (2003) B.J. Connolly, J.R. Scully, “Stress Corrosion Cracking Susceptibility in Al-Li-Cu Alloys 2090 and 2096 as a Function of Isothermal Aging Time,” Scripta Materialia, 42, 1039-1045 (2000) B.J. Connolly, R.S. Lillard, J.R. Scully, G.E. Stoner, “Water Staining of AA3104-H19 Can Body Stock: A Crevice Corrosion Study Utilizing the Double Crevice Assembly Test Method,” Corrosion, 53(8), 644-656 (1997)

推荐链接
down
wechat
bug