个人简介
Isaac Chang graduated with a BSc(Hons) degree in Materials & Metallurgy from Imperial College, London University in 1986. He pursued his postgraduate study under the supervision of Prof Brian Cantor at the Department of Materials, Oxford University, where he obtained a DPhil in Materials Science in 1991.
He stayed on and worked for Prof. Brian Cantor as a research fellow at The University of Oxford University in the field of rapidly solidified metallic glasses and nanocomposite thin films. In 1995, Isaac joined the School of Metallurgy and Materials, Birmingham University as a Lecturer.
He was promoted to Senior Lecturer in 2003. He obtained Chartered Scientist and Fellow of Institute of Materials, Minerals and Mining in 2005. He became the Head of Learning and Teaching for the School in 2010
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Vlachos, N. and Chang, I. T. H. (2011) Investigation of flow properties of metal powders from narrow particle size distribution to polydisperse mixtures through an improved Hall-flowmeter, Powder Technology, Vol 205(1-3): 71-80.
Su S.S. and Chang I.T.H.(2010) “Development of hyper-eutectic Al-Si based P/M alloys.” In Proceedings of 2010 World Congress on Powder Metallurgy. Florence, 10-14Oct, 2010 pp57-62 (EPMA Publications).
Poole A.D., Chang I.T.H, Lewington A.J. and Hirst T. (2010) “The Study of Sintering Behaviour in Hypoeutectic Al-Si Alloys.” In Proceedings of 2010 World Congress on Powder Metallurgy. Florence, 10-14Oct, 2010 pp17-24 (EPMA Publications).
Su, S.S. and Chang I.T.H., (2010 “Effect of processing conditions on hypereutectic Al-Si P/M alloys” In Proceedings of 2010 World Congress on Powder Metallurgy. Florence, 10-14Oct, 2010 pp49-56 (EPMA Publications).
Imbaby M., Chang I.T.H., Jiang K. (2010) “Micro Machine Parts Fabricated From Aqueous Based Stainless Steel Slurry” In: Ao S.L. and Gelman L. (eds.) Electronic Engineering and Computing Technology, Vol 60: Lecture Notes in Electrical Engineering. Springer. pp. 635-645.
Meluch, L and Chang I.T.H. (2010) Study of warm compaction of Alumix 123L, Powder Metallurgy, Vol 53(4): 323-327.
Imbaby M., Chang I.T.H. and Jiang K. (2010) Fabrication of 316-L stainless steel micro components using encapsulating soft mould and isopressing technique. Microelectronic Engineering, Vol 87(5-8): 1623-1628.
Vlachoas N. and Chang I.T.H. (2009) Effect of axial and radial powder mixing on chemical homogeneity and agglomeration. International Journal of Powder Metallurgy, Vol 45(1):29-47.
Vlachoas N. and Chang I.T.H. (2009)Optimisation of metal powder mixing parameters for chemical homogeneity and agglomeration. International Journal of Powder Metallurgy, Vol 45(1):19-28.
Imbaby M., Jiang K. and Chang I.T.H. (2009)A soft moulding process for fabrication of micromachine parts from stainless steel powder. Advanced Engineering Materials,Vol.11(3): 202-205.
Imbaby M., Jiang K. and Chang I.T.H. (2008) Net shape fabrication of stainless-steel micro machine components from metallic powder. Journal of Micromechanics and Microengineering, Vol. 18(11):1-7 .
Imbaby M., Jiang K., and Chang I.T.H. (2008), Fabrication of 316-L stainless steel micro parts by softlithography and powder metallurgy.Materials Letters, Vol. 62 : 4213–4216.
Kim J.S., Jiang K. , Falticeanu C. L., Davies G. J., and Chang I.T.H. (2007) Making Alumina Microcomponents from Al Powder. Materials Science Forum, Vols. 534-536:1041-1044.
Kim J.S., Chang I. T.H., Falticeanu C. L., Davies G. J., Jiang K. C. (2007) A Study of Debinding Behaviour and Microstructural Development of Sintered Al-Cu-Sn Alloy. Materials Science Forum, Vols. 534-536: 769-772.
Falticeanu C.L, Chang I.T.H, Kim J.S., Cook R. (2007) Sintering behaviour of Al-Cu-Mg-Si blends. Materials Science Forum, Vols. 534-536:597-600.
Cook R., Chang I. T. H. and Falticeanu C. L. (2007) Aluminium and Aluminium Alloy Powders for P/M Applications. Materials Science Forum, Vols. 534-536:773-776.
Jiang Z., Falticeanu C.L., and Chang I.T.H. (2007)Warm compression of Al alloy PM blends. Materials Science Forum, Vols. 534-536:333-336
Squire P. and Chang I.T. H. (2007)Development of rapidly solidified Al-Y-Ni based alloys. Materials Science and Engineering A Vol.449–451:1009–1012.
Maciel T.M., Chang I.T.H., Strangwood M. and de Castro, B.W. (2006) Brazing of Al2O3 with rapidly solidified Ni-Cr-P alloy ribbons. Materials Science Forum, Vol 530-531:473-477.
Kim J. S., Chang I.T.H. and Jiang K. (2006) Pressure free fabrication of 3D microcomponents using Al powders. Advanced Engineering Materials, Volume 8 (1-2): 38-41.
Yong X., Chang I.T.H. and Jones I.P. (2006) Synthesis and characterization of quasicrystalline Al-based composites Powder Metallurgy. Powder Metallurgy, Vol.49(2):140-145.
Kim J. S., Chang I.T.H.and Jiang K. (2006) A net shape process for metallic microcomponents fabrication. Journal of Micromech and Micromachining., Vol. 16:48-52