Brooks, Jeffery William - University of Birmingham - School of Metallurgy and Materials

个人简介

Profesor Brooks obtained his PhD from Birmingham University in 1978 and subsequently held a number of positions in industry including: Technical Manager – QinetiQ Limited Technical leader – MoD DERA Farnborough Chief Metallurgist – Doncasters plc Senior Metallurgist – INCO Alloy Products Limited

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

H.C.Basoalto, B.Vermeulen, J.W.Brooks, G.Coventry, S.Williams, J.Mason-Flucke and S.Bagnall, A New Hyperbolic Tangent Modelling Approach for Creep of the Single Crystal Nickel-Based Superalloy CMSX4, in Superalloys 2008, Ed. R. Reed et al. 2008. H.C.Basoalto, J.W.Brooks and S.Everitt, Life prediction of thermal barrier coatings, Gas Turbines: High Temperature Coatings and Life Extension Conference, 2009. H.C.Basoalto, J.W.Brooks, K. A.Long and J.R.Nicholls, Deposition technologies for thermal barrier coatings, Gas Turbines: High Temperature Coatings and Life Extension Conference, 2009. Multiscale microstructure modelling for nickel based superalloys, H. C. Basoalto, J. W. Brooks and I. Di Martino, 2009, Materials Science and Technology, Vol 25, No 2, p221 A Micromechanics Approach to Residual Life Assessment of Nickel-Based Superalloys, H.C. Basoalto , A. Wisbey and J.W. Brooks, 2009, ICFT12 The Evaluation of Repair Techniques for IN 738 and MarM002 Nickel Superalloys, J.W.Brooks, H.C.Basoalto, A.Wisbey, G.Kidd, S. McArthur and C.M. Fordyce, 2009, RTO-MP-AVT-163 Probabilistic Property Prediction of Aero-engine Components for Fatigue, J.W. Brooks, H.C. Basoalto, R. Sahota and P. Tranter, Proceedings of ASME Turbo Expo 2010, GT2010, 2010, Glasgow, UK, GT2010-22708 Lifing Approaches and Component Classification – Overview of Methods, J.W.Brooks and P.H.Tranter, Encyclopedia of Aerospace Engineering, 2010, John Wiley & Sons Evaluation of Mechanical Properties for the Simulation of Super Plastic Forming, J.W.Brooks, 2010, EuroSPF 2010, San Sebastian, Spain The Application of Microstructure and Property Modelling to the Prediction of Forged Component Performance, J.W.Brooks and H.C.Basoalto, 2010, OPTIMOM, Cambridge Advanced High Temperature Materials: Gas Turbine Fatigue, J.W.Brooks, 2010, Australian Gas Turbine Conference, Melbourne Friction and wear during precision forging of high temperature aerospace materials, J.W.Brooks, 2010, IOMMM High Temperature Wear and Erosion, November 2010, Derby Mechanical performance of extruded Ti–46Al–5Nb–1W titanium aluminide, A. Wisbey*, H. Singh, K. Lucas and J.W.Brooks, 2010, Materials Science and Technology, Vol 27, No 6, p1059 Mophological and textural evolution of the alpha phase during hot deformation of two-phase Ti-6Al-4V, B.Perumal, M.Rist, S.Gungor and J.W.Brooks, 2011, Titanium 2011, 12th World Conference on Titanium Modelling the High Temperature Deformation of Titanium Alloys, H.C.Basoalto and J.W.Brooks, 2011, Titanium 2011, 12th World Conference on Titanium Friction during precision forging of high temperature aerospace materials, J.W. Brooks, 2012, Materials Science and Technology, Vol 28, No 5, p528 Forming the Future, J.W.Brooks, 2013, Formed in the UK, IOM3, Warwick Comparison of fatigue crack propagation behaviour in two gas turbine disc alloys under creep fatigue conditions: evaluating microstructure, environment and temperature effects, S. Everitt, R. Jiang, N. Gao, M. J. Starink, J. W. Brooks and P. A. S. Reed, 2013, Materials Science and Technology, 29, 7 p781 Modelling the High Temperature Behaviour of Titanium Alloys, H.C.Basoalto and J.W.Brooks, 2014, AIAA SciTech 2014, Washington Prediction not extrapolation, J.W.Brooks and H.C.Basoalto, 2014, Workshop: Accelerated Testing of Materials, IOM3, Derby Incremental Forming Techniques – Blacksmithing for the 21st Century, J.W.Brooks and H.C.Basoalto, 2014, Advances in Metals Manufacturing Technologies, SMEA CONFERENCE AND EXHIBITION, Sheffield On the metallurgical modelling of Ti-6Al-4V in Welding processes, M. Villa, R.Turner, H.Wang, F.Boitout, J. W. Brooks and M.Ward, 2014 Modelling the Rotary Friction Welding Process for Titanium Alloys, R.Turner, B.Thota, D.Howe, H.C.Basoalto and J.W.Brooks, 2014, OPTIMoM 2014 Multiscale Materials Modelling of Fusion Welding, C.Panwisawas, Y.Sovani, R.Turner, J.W.Brooks and H.C. Basoalto, 2014, OPTIMoM 2014 The β recrystallisation characteristics of the α/β titanium alloy Ti-6Al-4V, M.Allen, P.Blackwell, M.Thomas and J.W.Brooks, 2014, OPTIMoM 2014