Pacek, Andrzej - University of Birmingham - School of Chemical Engineering

个人简介

Andrzej Pacek qualified with MSc in Mechanical Engineering from Warsaw University of Technology in 1973. He worked in the Institute of Gas Technology for two years and then he returned to Warsaw University of Technology as a lecturer while he worked towards his PhD. In 1983 he was awarded PhD in Simultaneous Mass and Energy Transfer and promoted to readership. In 1986 he started research in multiphase gas solid fluidization in the School of Chemical Engineering at the University of Birmingham.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Pacek A.W., Ding P., Nienow A.W., Wedd M., (2000), Phase Separation and Drop Size Distributions in homogeneous Na-alginate/Na caseinate mixture, Carbohydrate Polymers, 42, 401-409. Pacek A.W., Ding P., Nienow A.W.,(2001), The effect of volume fraction and impeller speed on the structure and drop size distribution in aqueous/aqueous dispersions of phases with different viscosities, Chem. Eng. Sci. , 56, 3247-3255 Baldyga J., Bourne J.R., Pacek A.W, Amanullah A., Nienow A.W., (2001), Effects of agitation and scale-up on drop size in turbulent dispersions: allowance for intermittency, Chem. Eng. Sci., 56, 3377-3387. Hu B.J., Nienow A.W., Pacek A.W.,(2002), The effect of the type and concentration of protein, air volume fraction and hydrodynamic conditions on bubble size and coalescence rate in batch gas/liquid dispersions, International Journal of Colloids and Surfaces, B: Biointerfaces, 31, 3-11. Ding P., Pacek A.W., Frith W.J., Norton I.T., Wolf B., (2005), Effect of Temperature and Composition on Interfacial Tension and Rheology of Separated Phases in Gelatine/Pullulan Mixtures, Food Hydrocolloids, 19, 567-574. Ding P., Pacek A.W., Abinhava K., Pickard S., Nienow A.W.,(2005) A Process for the Manufacture of Produced Toner – I. Evolution of Structure and Rheology, Ind. Eng. Chem. Res. 44(16) 6004 –6012. Hu B.J., Pacek A.W., Stitt E.H., Nienow A.W.,(2005). Bubble sizes in air-alcohol systems with and without particles: turbulent and transitional flow, Chem. Eng. Sci., 60, 6371 – 6377. Hu B.J., Nienow A.W., Stitt H.E., Pacek A.W. (2006), Bubble sizes in agitated solvent/reactant mixtures used in heterogeneous catalytic hydrogenation of 2-butyne-1,4-diol, Chem Eng Sci. 61, 6765-6774 Pacek A.W., Ding P., Utomo A.T., (2007), Effect of Energy Density, pH and Temperature on De-aggregation in Nano-particles/Water Suspensions in High Shear Mixer, Powder Technology 173, 203-210, Ding P., Pacek A.W., (2008), De-agglomeration of goethite nano-particles using ultrasonic comminution device, Powder Technology, 187, 1-10 Ding P., Norton I.T., Zhang Z., Pacek A.W., (2008), Mechanical properties of gelatin-rich micro-particles, Journal of Food Engineering, 86, 307-315 Spyropoulos F., Ding P., Frith W.J., Norton I.T.,Wolf B., Pacek A.W.,(2008), Interfacial Tension in Aqueous Biopolymer-Surfactant Mixtures, Journal of Colloid and Interface Science, 317, 604-610 Ding P., Pacek A.W.,(2008), Effect of pH on d agglomeration and rheology/morphology of aqueous suspensions of goethite nano-powder, Journal of Colloid and Interface Science, 325, 165-172, Utomo A.T., Baker M., Pacek A.W., (2009),Effect of stator geometry on flow pattern and energy dissipation rate in a rotor-stator mixer, Chem. Eng. Res. Des., 87, 533 – 542, Ding P., Pacek A.W., (2009) Ultrasonic processing of suspensions of hematite nano-powder stabilised with sodium polyacrylate, AIChE Journal, 55, 2796 – 2806, Ding P., Orwa M.G., Pacek A.W. (2010), DE-Agglomeration of hydrophobic and hydrophilic silica nano-powders in a high shear mixer, Powder Technology, 195, 221-226, Hall S., Pacek A.W., Kowalski A.J., Cooke M., Rothman D., 2011, Scaling Up of Silverson Rotor-Stator Mixers, Can J Chemical Engineering, in press