Crittenden, Barry - University of Bath - Department of Chemical Engineering

个人简介

Professor Barry Crittenden studied for a BSc and a PhD in Chemical Engineering at the University of Birmingham. He has worked for the UK Atomic Energy Authority, the MoD and M W Kellogg, and has worked at the University of Bath since 1973. He is a Lead Accreditation Assessor for the Institution of Chemical Engineers and he has extensive experience as an External Examiner for undergraduate degrees in chemical engineering in UK universities. Barry was elected to Fellowship of the Royal Academy of Engineering for his research and development of new processes, especially those that incorporate advanced separation processes.

研究领域

Centre for Advanced Separations Engineering

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Crittenden, B. D., Yang, M., Dong, L., Hanson, R., Jones, J., Kundu, K., Harris, J., Klochok, O., Arsenyeva, O. and Kapustenko, P., 2015. Crystallization Fouling with Enhanced Heat Transfer Surfaces. Heat Transfer Engineering, 36 (7-8), pp. 741-749. Arsenyeva, O. P., Crittenden, B., Yang, M. and Kapustenko, P. O., 2013. Accounting for the thermal resistance of cooling water fouling in plate heat exchangers. Applied Thermal Engineering, 61 (1), pp. 53-59. Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2013. Mitigation of crude oil fouling by turbulence enhancement in a batch stirred cell. Applied Thermal Engineering, 54 (2), pp. 516-520. Jeffs, C., Smith, M. W., Stone, C. A., Crittenden, B. and Perera, S., 2013. Low pressure drop respirator gas filters using adsorbent hollow fibres as an alternative to granular adsorbents. Journal of the International Society for Respiratory Protection, 30, pp. 12-29. Yang, M. and Crittenden, B., 2013. Use of CFD to determine effect of wire matrix inserts on crude oil fouling conditions. Heat Transfer Engineering, 34 (8-9), pp. 769-775. Yang, M. and Crittenden, B. D., 2012. Fouling thresholds in bare tubes and tubes fitted with inserts. Applied Energy, 89 (1), pp. 67-73. Yang, M., Young, A., Niyetkaliyev, A. and Crittenden, B., 2012. Modelling fouling induction periods. International Journal of Thermal Sciences, 51, pp. 175-183. Yang, M., Wood, Z., Rickard, B., Crittenden, B., Gough, M., Droegemueller, P. and Higley, T., 2012. Effect of turbulence enhancement on crude oil fouling in a batch stirred cell. Chemical Engineering Transactions, 29, pp. 1459-1464. Crittenden, B. D., Camus, O., Perera, S. P., Mays, T. J., Sanchez-Liarte, F., Tennison, S. R. and Crezee, E., 2011. Nonuniform channels in adsorbent monoliths. AIChE Journal, 57 (5), pp. 1163-1172. Agueda, V. I., Crittenden, B. D., Delgado, J. A. and Tennison, S. R., 2011. Effect of channel geometry, degree of activation, relative humidity and temperature on the performance of binderless activated carbon monoliths in the removal of dichloromethane from air. Separation and Purification Technology, 78 (2), pp. 154-163. Macchietto, S., Hewitt, G. F., Coletti, F., Crittenden, B. D., Dugwell, D. R., Galindo, A., Jackson, G., Kandiyoti, R., Kazarian, S. G., Luckham, P. F., Matar, O. K., Millan-Agorio, M., Muller, E. A., Paterson, W., Pugh, S. J., Richardson, S. M. and Wilson, D. I., 2011. Fouling in crude oil preheat trains: a systematic solution to an old problem. Heat Transfer Engineering, 32 (3-4), pp. 197-215. Young, A., Venditti, S., Berrueco, C., Yang, M., Waters, A., Davies, H., Hill, S., Millan, M. and Crittenden, B. D., 2011. Characterization of crude oils and their fouling deposits using a batch stirred cell system. Heat Transfer Engineering, 32 (3-4), pp. 216-227. Crittenden, B. D., Kolaczkowski, S. T., Takemoto, T. and Phillips, D. Z., 2009. Crude Oil Fouling in a Pilot-Scale Parallel Tube Apparatus. Heat Transfer Engineering, 30 (10-11), pp. 777-785. Bennett, C. A. and Crittenden, B. D., 2008. ACSAICHE 99128 Isokinetic phenomena in crude oil fouling. Abstracts of Papers of the American Chemical Society, 235. Camus, O., Perera, S., Crittenden, B., van Delft, Y. C., Meyer, D. F., Pex, P., Kumakiri, I., Miachon, S., Dalmon, J. A., Tennison, S. and Chanaud, P., 2006. Ceramic membranes for ammonia recovery. AIChE Journal, 52 (6), pp. 2055-2065. Crittenden, B. D., Patton, A., Jouin, C., Perera, S., Tennison, S. and Echevarria, J. A. B., 2005. Carbon monoliths: a comparison with granular materials. Adsorption, 11 (1), pp. 537-541. Crittenden, B. D. and England, R., 2005. Environmental impact assessment, teaching the principles and practices by means of a role-playing case study. Chemical Engineering Education, 39 (1), pp. 76-80. Crittenden, B. D., Lau, A., Brinkmann, T. and Field, R. W., 2005. Oscillatory flow and axial dispersion in packed beds of spheres. Chemical Engineering Science, 60 (1), pp. 111-122. Crezee, E., Tennison, B. D. and Crittenden, B. D., 2005. VOCs and NOx: better control and lower costs. Chemical Engineering Education Al-Redhwan, S. A., Crittenden, B. D. and Lababidi, H. M. S., 2005. Wastewater minimization under uncertain operational conditions. Computers and Chemical Engineering, 29 (5), pp. 1009-1021.