姜龙涛 - 哈尔滨工业大学 - 材料科学与工程学院

个人简介

姜龙涛，哈尔滨工业大学教授、博士生导师。2007年入选教育部新世纪优秀人才支持计划；2015年获首届中国复合材料杰出青年工程师奖。主要从事轻金属及其复合材料显微组织演化及尺寸稳定化机理；铝基复合材料设计、制备及强韧化机理；仿生梯度复合装甲结构设计制备与应用等方面的研究；主持并完成国家自然科学基金重点项目、省部级重点项目等多项课题的研究工作；参与多项国家重点项目的研究工作，发表论文80余篇，其中SCI检索60余篇；申请发明专利30余项，其中授权20余项；获国家技术发明二等奖、省部级一等奖和二等奖各1项。荣誉称号 2007年入选“教育部新世纪优秀人才支持计划” 2015年中国复合材料杰出青年工程师奖工作经历 1994.07-2000.09 哈尔滨工业大学金属精密热加工重点实验室研实员 2000.09-2003.09 哈尔滨工业大学金属精密热加工重点实验室助理研究员 2003.01-2003.03 日本东北大学智能工学科高级访问学者 2003.09-2008.09 哈尔滨工业大学材料物理与化学系副教授 2008.09-现在哈尔滨工业大学材料物理与化学系教授 2009.04-现在哈尔滨工业大学材料物理与化学系博士生导师教育经历 1990年-1994年哈尔滨工业大学金属材料与热处理专业学士 1996年-1998年哈尔滨工业大学材料学专业硕士 1998年-2001年哈尔滨工业大学材料学专业博士 1999年-2000年日本千叶工业大学金属工学科中日联合培养博士生主要任职中国复合材料学会理事中国惯性技术学会材料与工艺分会联络员《导航定位与授时》编委

研究领域

仿生装甲复合结构高强韧铝基复合材料轻合金及其复合材料尺寸稳定性机理铝基复合材料应用研究

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Deng Gong, Youfang Cao, Xiaobing Deng, Longtao Jiang*. Revealing the dimensional stability mechanisms of SiC/Al composite under long-term thermal cycling. Ceramics International. 2022. Z.L. Chao, Z.W. Wang, L.T. Jiang*, S.P. Chen, B.J. Pang, R.W. Zhang, S.Q. Du, G.Q. Chen, Q. Zhang, G.H. Wu. Microstructure and mechanical properties of B4C/2024Al functionally gradient composites. Materials & Design. 2022, 215. Ming Zhu, (Shaobo Ji), (Yifei Luo), (Feilong Zhang), (Zhihua Liu), (Changxian Wang), (Zhisheng Lv), (Ying Jiang), (Ming Wang), (Zequn Cui), (Guanglin Li), Longtao Jiang*, (Zhiyuan Liu) and Xiaodong Chen. A Mechanically Interlocked‐Connecting Strategy Based on Conductive Micro‐Bridges for Stretchable Electronics[J]. Advanced Materials, 2022, DOI:10.1002/adma.202101339 Z.L. Chao, L.T. Jiang*, G.Q. Chen*, Qiang. Zhang, N.B. Zhang, Q.Q. Zhao, B.J. Pang, G.H. Wu. A modified Johnson-Cook model with damage degradation for B4Cp/Al composites. Composite Structures. (doi. 10.1016) Youfang Cao , Longtao Jiang*, Deng Gong , Guoqin Chen,* , Ziyang Xiu , Yangming Cheng , Xiufang Wang , Gaohui Wu. Quantitative study of dimensional stability mechanism and microstructure evolution during precipitation process of 2024Al alloy. Journal of Materials Science & Technology. 2021, 90(10): 85-94 晁振龙, 姜龙涛, 魏嘉伟,等. 基体合金对B4C/Al复合材料力学及抗弹性能的影响[J]. 兵器材料科学与工程, 2020, 43(1)：6-10 晁振龙, 姜龙涛, 陈圣朋, 魏嘉伟, 宫灯, 陈国钦等. 55？C/7075Al复合材料抗弹性能与损伤行为研究[J]. 兵器材料科学与工程, 2020, 43(03):1-6. Gong D, Cao Y, Zhan Y, Liu X, Guan J, Jiang L*, Kang P*, Yu Z , Murid Hussain, Wu G. Micro-Creep Behavior and Microstructure Evolution of SiCP/2024Al Composite [J].Materials Science and Engineering: A, 771(2020): 138606. Gong D, Jiang L*, Guan J, et al. Stable Second Phase: The Key to High-Temperature Creep Performance of Particle Reinforced Aluminum Matrix Composite [J]. Materials Science and Engineering: A, 2020, 770.138551 Xue W, Jiang L*, Kang P, et al. Design and Fabrication of a Nanoamorphous Interface Layer in B4C/Al Composites to Improve Hot Deformability and Corrosion Resistance [J]. ACS Applied Nano Materials, 2020, 3(6): 5752-5761. Xue W, Jiang L*, Zhang B, et al. Quantitative Analysis of the Effects of Particle Content and Aging Temperature on Aging Behavior in B4C/6061Al Composites [J]. Materials Characterization, 2020, 163. Chao ZL., TT. Sun, LT. Jiang*, et al. Ballistic behavior and microstructure evolution of B4C /AA2024 composites.Ceramics International 2019, 45(16): 20539-20544. Chao Z L, Jiang L T*, Chen G Q, et al. The Microstructure and Ballistic Performance of B4C/AA2024 Functionally Graded Composites with Wide Range B4C Volume Fraction [J]. Composites Part B: Engineering, 2019, 161: 627-638. Chao Z L, Zhang L C, Jiang L T*, et al. Design, Microstructure and High Temperature Properties of in-Situ Al3Ti and Nano-Al2O3 Reinforced 2024Al Matrix Composites from Al-TiO2 System [J]. Journal of Alloys and Compounds, 2019, 775: 290-297. Jiang L T*, Xu Z G, Fei Y K, et al. The Design of Novel Neutron Shielding (Gd+B4C)/6061al Composites and Its Properties after Hot Rolling [J]. Composites Part B: Engineering, 2019, 168: 183-194. Xu Z G, Jiang L T*, Zhang Q, et al. The Formation, Evolution and Influence of Gd-Containing Phases in the (Gd+B4C)/6061al Composites During Hot Rolling [J]. Journal of Alloys and Compounds, 2019, 775: 714-725. Jiang H, Xu Z G, Xiu Z Y*, Jiang L T*et al. Effects of Pulse Conditions on Microstructure and Mechanical Properties of Si3N4/6061Al Composites Prepared by Spark Plasma Sintering (SPS) [J]. Journal of Alloys and Compounds, 2018, 763: 822-834. Yaping Wang, Longtao Jiang*, Risheng Pei, Guoqin Chen, (Xiu Lin),(Meihui Song) , Gaohui Wu. Effect of long-period-stacking-ordered phases on the microstructure and mechanical properties of carbon fiber reinforced magnesium-gadolinium-zinc composite. Journal of Alloys and Compounds. 2017, 708:728-733. Zhongguo Xu, Longtao Jiang*, Qiang Zhang, Jing Qiao, Gaohui Wu. The microstructure and influence of hot extrusion on tensile properties of (Gd+B4C)/Al composite [J]. Journal of Alloys and Compounds. 2017, 729: 1234-1243. Chi. H, Jiang L T*,, Chen. G, et al. The Tribological Behavior Evolution of TiB2/Al Composites from Running-in Stage to Steady Stage [J]. Wear, 2016: 9. Wang Y, Jiang L T*,, Chen G, et al. Characterization of the Reaction Products and Precipitates at the Interface of Carbon Fiber Reinforced Magnesium–Gadolinium Composite [J]. Materials Characterization, 2016, 113: 232-238. Xu Z G, Jiang L T*, Zhang Q, et al. The Design of a Novel Neutron Shielding B4C/Al Composite Containing Gd [J]. Materials & Design, 2016, 111: 375-381. X. Zhou, L. Jiang, S. Lei, W.Q. Tian, G. Wu, Micromechanism in Self-Lubrication of TiB2/Al Composite, ACS Appl Mater Interfaces 7(23) (2015) 12688-94. L. Jiang, P. Wang, Z. Xiu, G. Chen, X. Lin, C. Dai, G. Wu, Interfacial characteristics of diamond/aluminum composites with high thermal conductivity fabricated by squeeze-casting method, Mater. Charact. 106 (2015) 346-351. H. Chi, L. Jiang*, G. Chen, P. Kang, X. Lin, G. Wu, Dry sliding friction and wear behavior of (TiB2+h-BN)/2024Al composites, Materials & Design 87 (2015) 960-968.