近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
The Evolution of Intermetallic Compounds in High-Entropy Alloys: From the Secondary Phase to the Main Phase. Metals, vol.11:2054, 2021
Growth kinetics analysis of Nb-Al intermetallic compounds interfacial layers based on Nb-Al phase diagram. Vacuum, vol. 194, 110589, 2021
Self-Induced Internal Corrosion Stress Transgranular Cracking in Gradient-Structural Ploycrystalline Materials at High Temperature. Metals, vol.11(9):1465, 2021
Deformation and Phase Transformation of Disordered alpha Phase in the (alpha plus gamma) Two-Phase Region of a High-Nb TiAl Alloy. Materials, vol.14(17):4817, 2021
Effect of nano-Y2O3 addition on the creep behavior of an as-cast near-alpha titanium alloy. Materials Characterization,vol. 178, 111249, 2021
Hot Deformation Behavior and Hot Rolling Properties of a Nano-Y2O3 Addition Near-alpha Titanium Alloy. Metals, vol.11(5):837, 2021
The high temperature wetting and corrosion mechanism analysis of Nb by TiAl alloy melt. Corrosion Science, vol. 186, 109316, 2021
Effect of heat treatment and thermomechanical processing on microstructure and tensile property of Ti-44Al-8Nb-0.2W-0.2B-0.5Y alloy. China Foundry, vol.17(6):447-454, 2020
Study on rolling of a new near-α titanium alloy: Microstructure refinement and dual-scale silicides evolution. Journal of Alloys and Compounds, vol. 862, 156867 ,2021
Impacts of yttrium on microstructure and tensile properties of biomedical beta Ti-Nb-Zr fabricated by metal injection molding. Materials Science & Engineering A, vol. 792, 139816, 2020
Improved tensile properties of a novel near-α titanium alloy via tailoring microstructure by hot-rolling. Materials Science & Engineering A, vol. 790, 139588, 2020
The high-temperature deformation behavior of a novel near-α titanium alloy and hot-forging based on the processing map. Vacuum, vol. 173, 109135, 2020
Hot Deformation Behavior and Microstructural Evolution of PM Ti43Al9V0.3Y with Fine Equiaxed gamma and B2 Grain Microstructure. Materials, vol. 13(4), 2020
Microstructure Evolution and Mechanical Properties of PM-Ti43Al9V0.3Y Alloy. Materials, vol. 13(1), 2020
The Effect of Rolling Temperature on the Microstructure and Mechanical Properties of 5 vol.% (TiBw %2B TiCp)/Ti Composites. JOM, vol. 72(3), pp.1376-1383, 2020
Enhanced tensile strength and fracture toughness of a Ti-TiAl metal-intermetallic laminate (MIL) composite. Intermetallics, vol. 118, 106684, 2020
Fracture mechanism of a high tensile strength and fracture toughness Ti6Al4V-TiAl laminated composite. Journal of Alloys and Compounds, vol. 820, 153088 ,2020
High Nb–TiAl Intermetallic Blades Fabricated by Isothermal Die Forging Process at Low Temperature. Matel, 10757, 2020
Prediction of interfacial phase formation and mechanical properties of Ti6Al4V-Ti43Al9V laminate composites. Materials Science & Engineering A, vol. 782, 139173, 2020
Effect of residual stresses on the mechanical properties of Ti-TiAl laminate composites fabricated by hot-pack rolling. Materials Characterization,vol. 166, 110394, 2020
高熵合金及其他高熵材料研究新进展. 航空材料学报， vol. 39(6), pp.1-19, 2019
Oriented porous anodic oxide layers on Ti-50Al with outstanding oxidation resistance at 800 °C. Corrosion Science, vol. 159, pp.1-10, 2019
Interfacial characteristics and mechanical properties of TiAl/Ti6Al4V laminate composite (LMC) fabricated by vacuum hot pressing. Materials Science and Engineering A, vol. 742,pp.704-711, 2019
A Novel Composition Design Method for Beta-Gamma TiAl Alloys with Excellent Hot Workability. Metallurgical and Materials Transactions A,vol. 49A(11), pp.5574-5584, 2018
Microstructural evolution and refinement of as-forged Ti–43Al–9V–Y alloy after quenching and tempering. Intermetallics, vol. 113, pp. 1–7, 2019
Microstructure, texture and mechanical properties of Ti-43Al-9V-0.2Y alloy hot-rolled at various temperatures. Journal of Alloys and Compounds, vol. 777, pp.795-805 ,2019
Effect of Heat Treatment on Microstructures and Mechanical Properties of a Novel -Solidifying TiAl Alloy. Materials,vol. 12 (10), 2019
Deformation behavior and microstructure evolution mechanism of 5vol.% (TiBw %2B TiCp)/Ti composites during isothermal compression. Materials Characterization,vol. 154, pp.212-221, 2019
The Directional Solidification, Microstructural Characterization and Deformation Behavior of -Solidifying TiAl Alloy. Materials,vol. 12 (8), 2019
Effect of Multi-Directional Forging on the Microstructure and Mechanical Properties of -Solidifying TiAl Alloy. Materials,vol. 12 (9), 2019
Interface characteristics of Ti6Al4V-TiAl metal-intermetallic laminate (MIL) composites prepared by a novel hot-pack rolling. Materials Characterization,vol. 144, pp.173-181, 2018
Microstructure Homogeneity and Mechanical Properties of Large-Size As-Cast High Nb Containing TiAl Alloy Ingot. Physics of Metals and Metallography,vol. 119(9), pp.899-906,2018
Effect of 2-6 at.% Mo addition on microstructural evolution of Ti-44Al alloy. Journal of Materials Science & Technology,vol. 34(7),pp.1196-1204,2018
Microstructure, texture and tensile properties of Ti-47Al-2Cr-2Nb alloy produced by selective electron beam melting. Journal of Alloys and Compounds, vol. 766, pp.450-459 ,2018
Selective electron beam melting of TiAl alloy: Microstructure evolution, phase transformation and microhardness. Materials Characterization, vol. 142, pp. 584–592, 2018
Effect of beam current on microstructure, phase, grain characteristic and mechanical properties of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting. Journal of Alloys and Compounds, vol. 750, pp. 617–625, 2018
A high-performance β-solidifying TiAl alloy sheet: Multi-type lamellar microstructure and phase transformation. Materials Characterization, vol. 138, pp. 136–144, 2018
Modification of microstructure and properties of Ti-47Al-2Cr-4Nb-0.3W alloys fabricated by SPS with trace multilayer graphene addition. Materials Characterization, vol. 138, pp. 1–10, 2018
A high-performance β-stabilized Ti-43Al-9V-0.2Y alloy sheet with a nano-scaled antiphase domain. Materials Letter, vol. 214, pp. 182–185, 2018
Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: Lamellar colonies evolution and tensile properties. Materials and Design 121 ,pp.202-212, 2017
Hot deformation behavior and microstructural evolution of as-forged Ti-44Al-8Nb-(W, B, Y) alloy with nearly lamellar microstructure. Intermetallics, vol. 81 ,pp.62-72, 2017
High strength in high Nb containing TiAl alloy sheet with fine duplex microstructure produced by hot pack rolling. Journal of Alloys and Compounds, vol. 695,pp.3495-3502, 2017
Effects of direct rolling deformation on the microstructure and tensile properties of the 2.5 vol% (TiBw%2BTiCp)/Ti composites. Materials Science and Engineering A, vol. 684,pp.645-651, 2017
Low cycle fatigue, creep and creep-fatigue interaction behavior of a TiAl alloy at high temperatures. Scripta Materialia, vol. 144, pp.60–63, 2018
Dynamic recrystallization of the constituent γ phase and mechanical properties of Ti-43Al-9V-0.2Y alloy sheet. Materials, vol. 10, no. 9, pp., 2017
Electrochemical corrosion and bioactivity of Ti-Nb-Sn-hydroxyapatite composites fabricated by pulse current activated sintering. Journal of the Mechanical Behavior of Biomedical Materials, vol. 75, pp.222–227, 2017
Improvement of microstructure, mechanical properties and hot workability of a TiAl-Nb-Mo alloy through hot extrusion. Materials Science and Engineering A, vol.705,pp.200-209, 2017
Effect of dwell condition on fatigue behavior of a high-Nb TiAl alloy at 750 °C. Intermetallics, vol.91 ,pp.1-7, 2017
Effect of heat treatment on the microstructure and tensile properties of as-forged 2.5%(TiB TiC)/Ti composite. Rare Metal Materials and Engineering, vol. 45 (12),pp.3172-3176, 2016
Tensile mechanical behavior and failure mechanism of (TiBw%2BTiCp)/Ti composites at elevated temperature. Chinese Journal of Nonferrous Metals, vol. 26 (11) ,pp.2287-2295, 2016
Research progress of powder metallurgical technology for intermetallic titanium aluminide. Rare Metal Materials and Engineering, vol. 45 (9),pp.2466-2472, 2016
Research progress of ω phase in high Nb containing TiAl based alloy. Rare Metal Materials and Engineering, vol. 45 (7),pp.1903-1909, 2016
Thermomechanical processing of (TiB TiC)/Ti matrix composites and effects on microstructure and tensile properties. Journal of Materials Research, vol. 31 (9) ,pp.1244-1253, 2016
Microstructures and mechanical properties of Ti-43Al-5V-4Nb-Y alloy consolidated by spark plasma sintering. Key Engineering Materials, vol. 704 ,pp.183-189, 2016
Hot deformation behavior and dynamic recrystallization of a β-solidifying TiAl alloy. Materials Science and Engineering A, vol. 652, pp. 231–238, 2016
Microstructural evolution, hot workability, and mechanical properties of Ti-43Al-2Cr-2Mn-0.2Y alloy. Materials and Design, vol. 89, pp. 1020–1027, 2016
Effects of rolling deformation on microstructure and hardness of Ti-45Al-9Nb-0.3Y alloy. Journal of Rare Earths, vol. 34, no. 2, pp. 197-202, 2016
Deformation behavior of high Nb containing TiAl based alloy in α%2Bγ two phase field region. Materials and Design, vol. 90, pp. 225–229, 2016
Microstructure and properties of a beta-solidifying TiAl-based alloy with different refiners. Rare Metals, vol. 35, no. 1, pp. 42–47, 2016
Effect of (α%2Bβ) heat treatment on microstructure and mechanical properties of (TiB%2BTiC)/Ti-B20 matrix composite. Materials and Design, vol. 87, pp. 488–494, 2015
Strain rate dependence of microstructural evolution in β titanium alloy during subtransus superplastic deformation. Journal of Alloys and Compounds, vol. 647, pp. 1–5, 2015
Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength beta titanium alloy sheets. Materials Science and Engineering A, vol. 631, pp. 67–74, 2015
Effect of HA content on microstructure and compression properties of Ti-Nb-Sn/HA composites fabricated by plasma current activated sintering. Materials Science Forum, vol. 816, pp. 705–710, 2015
Hot deformation behavior of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe alloy in α %2B β field. Metals, vol. 5, no. 1, pp. 216–227, 2015
Preparation and microstructural analysis of TiAl alloy sheet. Materials China, vol. 34, no. 5, pp. 379–382, 2015
Effects of heat treatment on microstructure and mechanical properties of as-forged Ti-45Al-9Nb-Y alloy. Transactions of Materials and Heat Treatment, vol. 36, no. 8, pp. 90–95, 2015
Characterization of hot deformation behavior of as-forged TiAl alloy. Intermetallics, vol. 55, pp. 66–72, 2014
Hot workability of as-cast Ti-45Al-5.4V-3.6Nb-0.3Y alloy. Journal of Alloys and Compounds vol. 589 pp. 609–614, 2014
Progress of deformed TiAl alloys. Journal of Aeronautical Materials, vol. 34, no. 4, pp. 112–118, 2014
Direct rolling of Ti-6Al-4V-0.1B alloy sheets in the β phase region. Materials Science and Engineering A vol. 577 pp. 1–8, 2013
Effect of heat treatment on microstructure and mechanical properties of a new β high strength titanium alloy. Materials and Design vol. 55 pp. 183–190, 2014
Research progress in preparation of TiAl interemetallic based compound. Rare Metal Materials and Engineering, vol. 43, no. 3, pp. 757–762, 2014
Effects of trace TiB2 on microstructure in cast titanium alloys. International Journal of Cast Metals Research, vol. 25, no. 6, pp. 358–363, 2012
High temperature creep and fatigue behavior and life prediction method of a TiAl alloy. Acta Metallurgica Sinica, vol. 49, no. 11, pp. 1311–1317, 2013
The hot deformation behavior of Ti-43Al-9V-Y alloy. Acta Metallurgica Sinica, vol. 49, no. 11, pp. 1363–1368, 2013
Microstructure and properties of Ti-43Al-5V-4Nb alloy fabricated by elemental powder metallurgy forging process. Material Science and Technology, vol. 21, no. 4, pp. 84–88, 2013
Fabrication of thin-walled high-temperature titanium alloy component by investment casting. Materials and Manufacturing Processes, vol. 28, no. 6, pp. 605–609, 2013
Microstructure and tensile properties of 1-D forged (TiB%2BTiC)/Ti composite. Materials Science Forum, vol. 747-748, pp. 926–931, 2013
Microstructure and mechanical properties of large size Ti-43Al-9V-0.2Y alloy pancake produced by pack-forging. Intermetallics, vol. 34, pp. 29–34, 2013
Microstructure and mechanical properties of TiAl alloys produced by rapid heating and open die forging of blended elemental powder compacts. Materials Science and Engineering A, vol. 563, pp. 46–52, 2013
Microstructure and tensile properties of Ti-6Al-4V-0.1B alloys of direct rolling in the near Β phase region. Materials Science and Engineering A, vol. 560, pp. 140–147, 2013
Low-temperature superplasticity of forged Ti-43Al-4Nb-2Mo-0.5B alloy. Journal of Alloys and Compounds, vol. 543, pp. 19–25, 2012
Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy. Intermetallics, vol. 31, pp. 208–216, 2012
Effect of yttrium on microstructure and mold filling capacity of a near-α high temperature titanium alloy. China Foundry, vol. 9, no. 4, pp. 344–348, 2012
Microstructure evolution, hot deformation behavior and mechanical properties of Ti-43Al-6Nb-1B alloy. Intermetallics, vol. 31, pp. 249–256, 2012
Effect of different primary coating materials and mold temperatures on fluidity of high-temperature titanium alloy. Journal of Engineering Manufacture, vol. 226, no. 11, pp. 1862–1868, 2012
Temperature dependence of tensile properties and fracture behavior of as rolled TiB/Ti composite sheet. Materials Science and Engineering A, vol. 556, pp. 962–969, 2012
Evolution of grain boundary and texture in as-forged Ti-45Al-9Nb-Y alloy during tensile test at different temperature. Intermetallics, vol. 27, pp. 31–37, 2012
Evolution of microstructure and tensile properties of in situ titanium matrix composites with volume fraction of (TiB%2BTiC) reinforcements. Materials Science and Engineering A, vol. 548, pp. 152–160, 2012
Characterization of zirconia-based slurries with different binders for titanium investment casting. China Foundry, vol. 9, no. 2, pp. 125–130, 2012
Evolution of microstructural characteristic and tensile properties during preparation of TiB/Ti composite sheet. Materials and Design, vol. 36, pp. 505–510, 2012
High temperature deformation behavior of Ti-46Al-2Cr-4Nb-0.2Y alloy. Materials Science and Engineering A, vol. 539, pp. 107–114, 2012
Effect of pack rolling on microstructures and tensile properties of as-forged Ti-44Al-6V-3Nb-0.3Y alloy. Intermetallics, vol. 21, no. 1, pp. 97–104, 2012
Microstructure characterization and mechanical properties of TiB 2/TiAl in situ composite by induction skull melting process. Materials Science and Engineering A, vol. 532, pp. 522–527, 2012
Microstructure and mechanical properties of large size as-cast Ti-43Al-9V-0.2Y (at.%) alloy ingot from brim to centre. Materials and Design, vol. 33, no. 1, pp. 485–490, 2012
Progress in β-solidifying γ-TiAl based alloys. Chinese Journal of Rare Metals, vol. 36, no. 1, pp. 154–160, 2012
High temperature deformation behaviors of Ti-45Al-2Nb-1.5V-1Mo-Y alloy. Intermetallics, vol. 19, no. 12, pp. 1767–1774, 2011
Ti-Nb-Sn-hydroxyapatite composites synthesized by mechanical alloying and high frequency induction heated sintering. Journal of the Mechanical Behavior of Biomedical Materials, vol. 4, no. 8, pp. 2074–2080, 2011
Microstructure characterization and tensile properties of β phase containing TiAl pancake. Journal of Alloys and Compounds, vol. 509, no. 42, pp. 10179–10184, 2011
Effect of Mo addition on microstructures and mechanical properties of Ti2AlNb alloy. Advanced Materials Research, vol. 308-310, pp. 142–145, 2011
Microstructure and fracture toughness of a β phase containing TiAl alloy. Intermetallics, vol. 19, no. 10, pp. 1405–1410, 2011
Interfacial reactions between Ti-1100 alloy and ceramic mould during investment casting. Transactions of Nonferrous Metals Society of China (English Edition), vol. 21, no. SUPPL. 2, pp. s348–s352, 2011
Research on calculating model and software for insulating riser of steel castings. Foundry, vol. 60, no. 8, pp. 754–758, 2011
Improvement in collapsibility of ZrO 2 ceramic mould for investment casting of TiAl alloys. China Foundry, vol. 8, no. 1, pp. 9–13, 2011
Interfacial microstructure and shear strength of Ti-6Al-4V/TiAl laminate composite sheet fabricated by hot packed rolling. Materials and Design, vol. 32, no. 6, pp. 3167–3172, 2011
Constitution modeling and deformation behavior of yttrium bearing TiAl alloy. Journal of Rare Earths, vol. 29, no. 2, pp. 114–118, 2011
Microstructure evolution in rapidly solidified y added TiAl ribbons. Intermetallics, vol. 19, no. 2, pp. 160–164, 2011
Effect of heat treatment on microstructures and tensile properties of as-forged Ti-45Al-5Nb-0.3Y alloy. Intermetallics, vol. 19, no. 2, pp. 212–216, 2011
Effect of V and Nb additions on microstructure, properties, and deformability of Ti-45Al -9 (V, Nb, Y) alloy. China Foundry, vol. 7, no. 4, pp. 357–361, 2010
Microstructure, mechanical properties, hot deformation and oxidation behavior of Ti-45Al-5.4V-3.6Nb-0.3Y alloy. Journal of Alloys and Compounds, vol. 498, no. 1, pp. 95–101, 2010
Effect of spark plasma sintering temperature on the microstructure and mechanical properties of a Ti2AlC/TiAl composite. Journal of Alloys and Compounds, vol. 496, no. 1-2, pp. 462–466, 2010
Microstructure and mechanical properties of as-cast Ti-43Al-9V-0.3Y alloy. Journal of Alloys and Compounds, vol. 473, no. 1-2, pp. 123–126, 2009
Effects of thermo-mechanical treatments on microstructure of Ti-43Al-9V-Y alloy. International Journal of Modern Physics B, vol. 23, no. 6-7, pp. 1009–1013, 2009
Influence of yttrium on the high temperature deformability of TiAl alloys. Materials Science and Engineering A, vol. 499, no. 1-2, pp. 53–57, 2009
Continuous cooling phase transformation of Ti-45Al-5Nb(-0.3Y) alloys. Rare Metal Materials and Engineering, vol. 38, no. 1, pp. 25–28, 2009
Effects of forging and rolling on micro-structure and mechanical property of Ti-43Al-9V-0.3Y alloy. Acta Metallurgica Sinica, vol. 44, no. 7, pp. 815–820, 2008
Microstructural refinement and mechanical properties of Y-bearing TiAl alloys. Journal of Alloys and Compounds, vol. 457, no. 1-2, pp. 265–269, 2008
Effects of thermo-mechanical treatment on microstructure and mechanical property of Ti-45Al-5Nb-0.3Y alloy. Acta Metallurgica Sinica, vol. 44, no. 6, pp. 757–763, 2008
Microstructure refining of TiAl alloys. Acta Metallurgica Sinica, vol. 44, no. 5, pp. 551–556, 2008
Development of rapidly solidified titanium aluminide compounds. Acta Metallurgica Sinica, vol. 44, no. 5, pp. 569–573, 2008
Microstructure evolution of TiAl composite powder during low temperature high-energy milling. Rare Metal Materials and Engineering, vol. 37, no. 2, pp. 236–239, 2008
Effects of minor yttrium addition on microstructure, mechanical properties and hot workability of Nb or v containing TiAl alloys. Materials Science Forum, vol. 539-543, no. PART 2, pp. 1577–1582, 2007
Microstructure of rapidly solidified Ti-46Al-2Cr-2Nb-xY alloys. Advanced Materials Research, vol. 29-30, pp. 103–106, 2007
Isothermal deformation simulation and canned forging of Ti-45Al-5Nb-0.3Y alloy. Journal of Aeronautical Materials, vol. 27, no. 3, pp. 42–46, 2007
Effects of solution temperature on microstructures and properties of Ti-23Al-25Nb-0.36Y alloy. Heat Treatment of Metals, vol. 32, no. 5, pp. 59–62, 2007
Essence of room temperature brittleness of TiAl based alloys and improving approaches. Journal of Advanced Materials, vol. 39, no. 1, pp. 33–40, 2007
Effects of minor yttrium addition on hot deformability of lamellar Ti-45Al-5Nb alloy. Transactions of Nonferrous Metals Society of China (English Edition), vol. 17, no. 1, pp. 58–63, 2007
Effects of yttrium on microstructure and properties of TiAl alloy. Special Casting and Nonferrous Alloys, vol. 26, no. 12, pp. 762–765, 2006
Effects of Y on compression properties of Ti-23Al-25Nb alloy. Journal of Aeronautical Materials, vol. 26, no. 6, pp. 1–5, 2006
Microstructure and interface reaction of investment casting TiAl alloys. Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL. 3, pp. 1910–1914, 2006
Production and characterization of TiAl ribbons with Y additions. Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL., pp. s711–s714, 2006
Influence of yttrium on microstructure and properties of Ti-23Al-25Nb alloy after heat treatment. Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL., pp. s849–s853, 2006
Effect of yttrium addition on microstructures and room temperature tensile properties of Ti-47Al alloy. Journal of Rare Earths, vol. 24, no. 3, pp. 352–356, 2006
Effects of yttrium on microstructure and properties of Ti-23Al-25Nb alloy after heat treatment. Rare Metal Materials and Engineering, vol. 35, no. 4, pp. 655–658, 2006
Effects of yttrium on microstructures and properties of Ti-17Al-27Nb alloy. Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. 2, pp. 316–320, 2006
Alloying design of titanium aluminum intermetallics and research progress. Journal of Aeronautical Materials, vol. 26, no. 2, pp. 72–78, 2006
Effect of yttrium on the microstructure of Ti-23Al-25Nb alloy. Journal of Aeronautical Materials, vol. 26, no. 1, pp. 6–10, 2006
Effect of rare earth Y(0.3 at%) on as-cast microstructure of Ti-45Al-5Nb alloy. Rare Metal Materials and Engineering, vol. 35, no. 1, pp. 1–4, 2006
Effect of rare earth element y on hot-press deformation behavior of Ti-43A1-9V alloy. Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 81–82, 2005
Preparing and analyzing of investment cast mould shell for titanium alloys. Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 220–221, 2005
Preparation of fine-grains TiAl alloys by mechanical alloying and spark plasma sintering. Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 448–449, 2005
High temperature pack-rolling of Ti-43 Al-9V-0.3Y alloy sheets. Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 452, 2005
Effect of rare earth y on microstructures and mechanical properties of Ti-45Al-5Nb alloy. Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 397, 2005
Effect of various heat treatment conditions on microstructures and mechanical properties of Ti-23Al-25Nb. Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 400–401, 2005
Electron structure of γ/α2 phase boundaries in Ti-47 Al-2X (X = Nb, Cr, V) intermetallics. Journal of Harbin Institute of Technology, vol. 37, no. SUPPL. 1, pp. 129–132, 2005
Calculating for the activity coefficient of components in Ti-47Al-0.5Y alloy. Journal of Harbin Institute of Technology, vol. 37, no. SUPPL. 1, pp. 126–128%2B140, 2005
Study on microstructure and properties of γ-TiAl/Ti-6Al-4V complex sheet. Journal of Harbin Institute of Technology, vol. 37, no. SUPPL. 1, pp. 185–187, 2005
Influence of yttrium on microstructure, mechanical properties and deformability of Ti-43Al-9V alloy. Intermetallics, vol. 13, no. 3-4, pp. 263–266, 2005
Numerical simulation of induction skull melting process for titanium-aluminium base alloy. Acta Metallurgica Sinica (English Letters), vol. 17, no. 6, pp. 928–933, 2004
Mechanisms of improvement of high temperature deformability of Ti-43Al-9V-0.3Y alloy with addition of Y. Journal of Rare Earths, vol. 22, no. SUPPL. 4, pp. 150–153, 2004
Composition control in induction skull melting of Ti-22Al-25Nb alloy. Foundry Technology, vol. 25, no. 11, pp. 834, 2004
Developments in TiAl based intermetallics research. Material Science and Technology, vol. 11, no. 4, pp. 441–444, 2003
Electron structure of γ/α2 phase boundaries in TiAl based alloys. Journal of Materials Science and Technology, vol. 19, no. SUPPL., pp. 85–87, 2003
Analysis of valence electron structure of TiAl-X intermetallics. Rare Metal Materials and Engineering, vol. 32, no. 11, pp. 898, 2003
Thermodynamic parameter calculation and evaporation behavior of elements in Ti-Al-V alloys. Transactions of Nonferrous Metals Society of China (English Edition), vol. 13, no. SPEC. ISS., pp. 119–123, 2003
Grain and lamellar refinement in TiAl based alloy by yttrium addition. Transactions of Nonferrous Metals Society of China (English Edition), vol. 13, no. SPEC. ISS., pp. 133–135, 2003
Microstructure of hot-pack rolled Ti-43Al-9V-0. 3Y alloy. Transactions of Nonferrous Metals Society of China (English Edition), vol. 13, no. SPEC. ISS., pp. 170–173, 2003
Effect of rare earth on microstructure of γ-TiAl intermetallics. Journal of Rare Earths, vol. 21, no. 2, pp. 163–166, 2003
Methods of improving room temperature ductility of TiAl based alloys. Rare Metal Materials and Engineering, vol. 32, no. 2, pp. 81–86, 2003
Research on TiAl based alloys materials and precision forming. Acta Metallurgica Sinica, vol. 38, no. 11, pp. 1141–1148, 2002
Recent development in engineering γ-TiAl intermetallics. Transactions of Nonferrous Metals Society of China (English Edition), vol. 12, no. 4, pp. 605–609, 2002
京公网安备 11010802027423号