近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
W.C. Zhang, Y.J. Feng, W.Z. Chen*, J.L. Yang, Effects of heattreatment on the microstructure and mechanical properties of in situinhomogeneous TiBw/Ti6Al4V composite fabricated by pre–sintering and cannedpowder extrusion, Journal of Alloys and Compounds, 693, pp1116–1123, 2017.
W.Z. Chen, J.L. Yang, W.C. Zhang*, M.M. Wang, D.D. Du,G.R. Cui. Influence of TiBw volume fraction on microstructure andhigh-temperature properties of in situ TiBw/Ti6Al4V composites with TiBwcolumnar reinforced structure fabricated by pre-sintering and canned extrusion. AdvancedPowder Technology, July 2017, DOI:10.1016/j.apt.2017.06.016, IF=2.659
J.L. Yang, G.F. Wang*, W.C. Zhang, W.Z. Chen, X.Y.Jiao, K.F. Zhang. Microstructure evolution and mechanical properties of P/MTi-22Al-25Nb alloy during hot extrusion. Materials Science and Engineering A, Volume 699,24 June 2017, Pages 210-2016.
Y.J. Feng, W.Z. Zhang*, G.R. Cui, J.P. Wu, W.Z. Chen. Microstructureand mechanical properties of TiBw/Ti6Al4V composites fabricated bypre-sintering and canned extrusion. Journal of Alloys and Compounds,volume 721, 15 October 2017, Pages 383-391.
J.L. Yang, X.Y. Jiao, W.Z. Chen *, W.C. Zhang, G.F. Wang, ANovel Extrusion for Manufacturing TiBw/Ti6Al4V Composite Tubes with aQuasi-Continuous Reinforced Structure, Materials 2017, 10, 375
Y.J. Feng, W.C.Zhang *, L. Zeng, G.R. Cui, W.Z. Chen*, Room-Temperature and High-Temperature TensileMechanical Properties of TA15 Titanium Alloy and TiB Whisker-Reinforced TA15Matrix Composites Fabricated by Vacuum Hot-Pressing Sintering, Materials 2017, 10, 424
W.C. Zhang, W.K. Wang, W.Z. Chen*,E.D. Wang. Optimization of Rolling Condition for ZK61 Alloy Sheets viaMicrostructure and Mechanical Property Analysis, Journal of Materials Engineeringand Performance, 25, pp5551–5559, 2016
L.X.Zhang, W.Z. Chen*, W.C. Zhang,W.K. Wang, E.D. Wang. Microstructure and mechanicalproperties of thin ZK61 magnesium alloy sheets by extrusion and multi–passrolling with lowered temperature. Journal ofMaterials Processing Technology, 237, pp65-74, 2016.
W.Z.Chen*, W.C. Zhang, Y.D. Qiao,Q. Miao, E.D. Wang.Enhanced ductility in high-strength fine-grained magnesiumand magnesium alloy sheets processed via multi-pass rollingwith loweredtemperature. Journal of Alloys and Compounds, 665, pp13-20,2016.
W.C. Zhang, M.M. Wang, W.Z. Chen*, Y.J. Feng, Y. Yu. Preparation ofTiBw/Ti-6Al-4V composite with an inhomogeneous reinforced structure by a cannedhot extrusion process. Journal of Alloys and Compounds,669, pp79-90,2016.
Y. Yu，H. Hu，W.C. Zhang，X. Xu. Microstructure evolution and recrystallization after annealing oftungsten heavy alloy subjected to severe plastic deformation. Journalof Alloys and Compounds, 2016, 685:971-977.
W.Z.Chen, W.C. Zhang*, L.X.Zhang, E.D. Wang. Property improvements in fine-grainedMg-Zn-Zr alloy sheets produced by temperature-step-down multi-pass rolling. Journalof Alloys and Compounds, 646, pp195-203,2015.
W.Z. Chen*, W.C. Zhang, H.Y. Chao, L.X. Zhang, E.D. Wang. Influence oflarge cold strain on the microstructural evolution for a magnesium alloysubjected to multi-pass cold drawing. Materials Science and Engineering A,623, pp92-96, 2015.
W.C. Zhang, M.M. Wang, W.Z. Chen*, Y.J. Feng, Y. Yu. Evolution of inhomogeneousreinforced structure in TiBw/Ti-6AL-4V composite prepared by pre-sintering andcanned β extrusion. Materials & Design, 88, pp471-477, 2015.
Y. Yu*, W.C. Zhang, W.Q. Dong, J.L. Yang. Effects of pre-sintering onmicrostructure and properties of TiBw/Ti6Al4V composites fabricated by hotextrusion with steel cup. Materials Science and Engineering A.2015, 638:38-45
Y. Yu*, W.C. Zhang, W.Q. Dong, X.Z. Han, C.L. Pei, X.Y. Jiao, Y.J.Feng. Research on heat treatment of TiBw/Ti6Al4V composites tubes. Materials& Design, 2015 , 73:1-9
Y. Yu，W.C. Zhang，H.Yu. Effect of Cu content and heat treatment on the properties andmicrostructure of W-Cu composites produced by hot extrusion with steel cup. AdvancedPowder Technology, 2015, 26(4):1047-1052.
Y. Yu, W.C. Zhang, E.D. Wang. Effect of heat treatment on microstructureand mechanical properties of hot-hydrostatically extruded93W-4.9Ni-2.1Fe alloy. Journal of Alloys and Compounds,2015 , 622:880-884
W.C. Zhang*, Y. Yu, X.N. Zhang, W.Z.Chen, E.D. Wang. Mechanical anisotropy improvement in ultrafine-grained ZK61magnesium alloy rods fabricated by cyclic extrusion and compression. Materials Science and Engineering A, 600, pp181-187, 2014.
W.C. Zhang, X.Y. Jiao, Y. Yu*, etc.Microstructure and Properties of 3.5vol.% TiBw/Ti6Al4V Composite TubesFabricated by Hot-hydrostatic extrusion. Journal of Materials Science &Technology. 2014，30(7):710-714
Y. Chen, Y. Yu, W.C. Zhang, etc. TEM characterization of the microstructureof hot-hydrostatically extruded 93W-4.9Ni-2.1Fe alloy. Applied Mechanics and Materials.2014,490-491: 38-42
Y. Chen, Y. Yu, W.C. Zhang, E.D. Wang. Nanocrystalline Ni-30wt%Fesupersaturated solid solution synthesized by mechanical alloying. AppliedMechanics and Materials.2014, 490-491: 198-202
Y. Yu, W.C. Zhang, Y. Chen, E.D. Wang. Effect of swaging onmicrostructure and mechanical properties of liquid phase sintered 93W-4.9(Ni,Co)-2.1Fe alloy. International Journal of Refractory Metals and Hard Materials,2014 , 44:103-108.
Y.J. Feng, W.Z. Zhang*, G.R. Cui, W.Z. Chen, Y. Yu. Room temperaturetensile fracture characteristics of the oriented TiB whisker reinforced TA15matrix composites fabricated by pre-sintering and canned extrusion. Materials Science and Engineering A (IN PRESS).
京公网安备 11010802027423号