近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Y. Y. Fan, C. L. Yang, S. B. Lin*, C. L. Fan, and W. G. Liu. Ultrasonic Wave Assisted GMAW. Welding Journal, 2012, 91(3):91s-99s
Y. Y. Fan, C. L. Fan, C. L. Yang, W. G. Liu and S. B. Lin*. Research on short circuiting transfer mode of ultrasonic assisted GMAW method. Science and Technology of Welding and Joining, 2012, 17(3):186-190
Fan, Yangyang, Sanbao Lin, Chunli Yang, Chenglei Fan, and Wenge Liu. Research on Arc Characteristics and Metal Transfer Modes of Ultrasonic Assisted GMAW Process. China Welding, 2011, 20(3): 17-21.
Yuan Heran, Lin Sanbao, Yang Chunli, Fan Chenglei, Wang Shuai. Microstructure and porosity analysis in ultrasonic assisted TIG welding of 2014 aluminum alloy. China Welding, 2011, 20(1):39-43
范阳阳, 林三宝, 黄嘉明, 杨春利. 超声-电弧复合焊接系统换能器优化设计. 焊接学报. 2011, 32(6):101-104
S.B. Lin, J.L. Song *, C.L. Yang, C.L. Fan, D.W. Zhang. Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al–Cu filler metal. Materials and Design, 2010,31(5): 2637-2642
J. L. Song, S. B. Lin*, C. L. Yang, C. L. Fan and G. C. Ma. Analysis of intermetallic layer in dissimilar TIG welding–brazing butt joint of aluminium alloy to stainless steel. Science and Technology of Welding & Joining, 2010, 15(3):213-218
Fan Yangyang, Fan Chenglei, Yang Chunli, Liu Wenge and Lin Sanbao*. Development and preliminary study on the ultrasonic assisted GMAW method. China Welding, 2010, 19(4):1-5
Lin Sanbao, Song Jianling, Yang Chunli, Fan Chenglei, Zhang Dongwei. Experimental study on dissimilar TIG welding-brazing of 5A06 aluminum alloy to SUS321 stainless steel.China Welding, 2010, 19(1): 26-31
孙清洁，林三宝，杨春利，闫久春. 超声-TIG复合焊接装置的研制与应用. 焊接学报, 2010, 31(2): 79-82
宋建岭，林三宝，杨春利，马广超. 特种钎剂辅助铝/钢异种合金TIG熔-钎焊, 焊接学报, 2010, 31(2): 45-48
孙清洁, 杨春利, 林三宝, 范阳阳. 超声钨极氩弧复合焊金属熔化行为分析. 焊接学报, 2010, 31(3): 41-44
C. L. Yang, N. Guo, S. B. Lin, et al. Application of rotating arc system to horizontal narrow gap welding. Science and Technology of Welding and Joining,2009, 14(2):172-177
Guo, N.; Lin, S. B.; Zhang, L.; Yang, C. L. Metal transfer characteristics of rotating arc narrow gap horizontal GMAW. Science and Technology of Welding & Joining, 2009, 14(8):760-764
GuoNing, Lin Sanbao, Fan Chenglei, Zhang Yaqi, Yang Chunli. Study on weld formation in a novel rotating arc horizontal GMAW. China Welding, 2009, 18(2):35-40
N. Guo*, S. B. Lin, C. Gao, C. L. Fan and C. L. Yang. Study on elimination of interlayer defects in horizontal joints made by rotating arc narrow gap welding. Science and Technology of Welding and Joining2009,14(6):584-588
Sun, Q.J.; Lin, S.B.; Yang, C.L.; Zhao, G.Q. Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas welding. Science and Technology of Welding & Joining, 2009, 14(8): 765-767
Song Jianling, Lin Sanbao, Yang Chunli, Ma Guangchao and Wang Yinjie. Analysis on interfacial layer of aluminum and non-coated stainless steel joint made by TIG welding-brazing. China Welding, 2009, 18(2):1-5
J.L.Song, S.B.Lin, C.L.Yang, C.Ma, H.Liu. Spreading behavior and microstructure characteristics of dissimilar metals TIG welding-brazing of aluminium alloy to stainless steel. Materials Science and Engineering A. 2009, 509:31-40
S. B. Lin, J. L. Song*, C. L. Yang and G. C. Ma. Metallurgical and mechanical investigations of aluminium-steel butt joint made by tungsten inert gas welding–brazing. Science and Technology of Welding and Joining, 2009, 14(7): 636-639
J.L. Song, S.B. Lin*, C.L. Yang, C.L. Fan. Effects of Si additions on intermetallic compound layer of aluminum–steel TIG welding–brazing joint. Journal of Alloys and Compounds, 2009, 488(8):217-222
林三宝，宋建岭，杨春利，马广超. 铝合金/不锈钢钨极氩弧熔-钎焊接头界面层的微观结构分析. 金属学报, 2009, 45(10):1211-1216
Lin Sanbao, Fu Xibin, Fan Chenglei, Yang Chunli, and Luo Lu., Development of an automatic weld surface appearance inspection system using machine vision.China Welding, 2009, 18(3):74-80
Qiu L, Yang CL, Lin SB, et al. " Effect of pulse current on microstructure and mechanical properties of variable polarity arc weld bead of 2219-T6 aluminium alloy" MATERIALS SCIENCE AND TECHNOLOGY, 2009,25(6):739-742
Bai QS, Yang K, Liang YC, Yang CL, Wang B. Tool runout effects on wear and mechanics behavior in microend milling, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2009,27(3):1566-1572
范阳阳, 孙清洁, 杨春利, 林三宝. 基于超声振动的304 不锈钢TIG焊接.焊接学报, 2009, 30(2): 91-94
郭宁, 林三宝, 张亚奇， 杨春利. 旋转电弧横向GMAW接头组织及成形特点, 焊接学报, 2009,30(8):101-104
林三宝, 宋建岭, 马广超, 杨春利. 铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能. 焊接学报, 2009, 30(7): 9-12
宋建岭，林三宝，杨春利，马广超. 铝合金/不锈钢预涂层钨极氩弧熔钎焊接头的特性. 中国有色金属学报, 2009,19(7):1209-1215
范成磊，孙清洁，赵博，杨春利，张良峰, 双丝窄间隙熔化极气体保护焊的焊接稳定性, 机械工程学报, 2009,45(7):265-269
林三宝, 李金全, 杨春利, 陈树君. 变极性等离子弧焊双填丝工艺的研究. 焊接, 2009, (6):5-9
郭宁, 林三宝, 范成磊 张亚琦, 杨春利, 横向GMAW熔池控制研究进展, 焊接, 2009, (9):21-25
林三宝，马广超，宋建岭，杨春利, 铝合金／镀锌钢TIG熔钎焊接头界面组织及力学性能, 焊接, 2009, (2):34-37
白清顺，杨春利，盆洪民，窦建华，梁迎春. 微构件分子动力学集成仿真系统的研究. 机械设计与制造, 2009,(9):107-109
Fu Xibin; Lin Sanbao; Fan Chenglei; Yang Chunli and Luo Lu, Development of an automatic post-weld inspection system based on laser vision, China Welding, 2008, 17(1):44-48
Fu Xibin, Lin Sanbao, Fan Chenglei, Luo Lu, Yang Chunli, Laser vision based adaptive fill control system for TIG welding, China Welding, 2008, 17(4):44-48
Sun Qingjie, Lin Sanbao, Yang Chunli, Fan Yangyang, Zhao Guoqing, The arc characteristic of ultrasonic assisted TIG welding, China Welding, 2008, 17(4):52-57
Bai QS, Yang CL, Liang YC, et al. Wear characteristics of micro-diameter cutter in high speed machining micro parts. 9th Conference on Machining and Advanced Manufacturing Technology in China AUG 16-19, 2007 Harbin, 2008,425-429
宋建岭，林三宝，杨春利，范成磊, 不锈钢TIG熔钎焊接头微观组织及力学性能, 焊接学报, 2008, 29(4): 105-108
宋建岭, 林三宝, 杨春利, 范成磊, 镍基合金/不锈钢TIG钎焊接头特性, 中国有色金属学报, 2008, 18(5):834-839
伏喜斌, 林三宝, 杨春利, 范成磊, 钱侠, 基于激光视觉传感的角焊缝外形尺寸检测, 焊接学报, 2008, 29(7): 47-50
赵博，范成磊，杨春利，孙清洁，高速旋转电弧窄间隙MAG焊焊缝成形的分析, 焊接学报., 2008,29(9):109-112
赵博，范成磊，杨春利，张良锋，双丝窄间隙焊接工艺参数对焊缝成形的影响, 焊接学报., 2008,29(6):81-84
宋建岭, 林三宝, 杨春利, 马广超, 铝与钢异种金属电弧熔－钎焊接的研究与发展现状, 焊接, 2008, (6):6-9
宋建岭, 林三宝, 杨春利, 范成磊, 基合金/不锈钢TIG熔钎焊接工艺研究, 焊接, 2008, (5)
马广超, 林三宝, 宋建岭, 杨春利. 5052铝合金薄板搅拌摩擦焊工艺. 焊接, 2008, (10):6-9
罗璐， 林三宝， 伏喜斌, 范成磊, 基于激光视觉的焊缝特征信息检测技术研究. 焊接, 2008, (7):6-9
王海涛,孙清洁,杨春利,吕世雄, 热丝冷体TIG堆焊中的HS201焊丝润湿铺展研究, 焊接. , 2008,(12):40-42
赵博, 范成磊, 杨春利, 孙清洁, 窄间隙GMAW的研究进展, 焊接, 2008,(2):11-15
赵博, 范成磊, 杨春利, 张良锋, 双丝共熔池窄间隙MAG焊方法的工艺研究, 焊接, 2008,(1):34-37
Lin Sanbao; Fan Chenglei; Song Jianling and Yang Chunli, Research on CMT welding of nickel-based alloy with stainless steel, China Welding, 2007, 16(3): 23-26
Fan Chenglei, Lin Sanbao, Yang Chunli, Song Jianling. Optimization of filler metal during superalloy-stainless steel arc brazing. Rare Metals, 2007, 26(6): 36-40
Zhao B, Fan CL, Yang CL. Characteristics of the electrode melting phenomena in narrow gap MAG high-rotating-speed arc welding. Rare Metals, 2007, 26(S1): 291-295
Wang HX, Wei YH, Yang CL. Numerical calculation of variable polarity keyhole plasma arc welding process for aluminum alloys based on finite difference method. COMPUTATIONAL MATERIALS SCIENCE, 2007,40(2):213-225
Wang HX, Wei YH, Yang CL. Numerical simulation of variable polarity vertical-up plasma arc welding process. COMPUTATIONAL MATERIALS SCIENCE. 2007,38(4):571-587
Wang HX, Wei YH, Yang CL. Numerical analysis of plasma arc welding process for aluminium alloy. Science and Technology of Welding and Joining. 2007,12(1):32-44
范成磊,杨春利,梁迎春,林三宝,余翔, Optimality analysis of multiplex A-TIG welding flux for nickel-base superalloy, China Welding, 2007, 16(2): 46-50
范成磊，林三宝，杨春利，余翔; 赵文胜, Nimonic263合金混合型焊接活性剂及效果研究, 材料科学与工艺, 2007,15(5):640-644
邱灵; 范成磊; 林三宝; 杨春利, 高频脉冲变极性焊接电源及电弧压力分析, 焊接学报, 2007, 28(11):81-84
林三宝,伏喜斌,杨春利, 基于激光视觉的ERW焊管在线错边监测系统, 焊接, 2007, (2): 11-13
伏喜斌,林三宝,杨春利, 基于激光视觉传感的焊后检测技术研究综述, 焊接, 2007, (6):24-27
邱灵,杨春利,林三宝, 高频脉冲变极性焊接工艺性能研究, 焊接, 2007, (7):35-38
林三宝,宋建岭, 电弧钎焊技术的应用及发展, 焊接, 2007, (4):19-21
伏喜斌; 林三宝; 杨春利; 钱侠, 基于激光视觉传感的焊缝图像采集系统研究, 焊接, 2007, (10): 11-13
邱灵, 杨春利, 林三宝, 范程磊, 基于μC/OSII的变极性焊接电源的研制, 电焊机, 2007, 37(1):14-16
白清顺, 杨春利, PCD刀具加工Al2O3颗粒耐磨层的应力分布有限面分析, 工具技术, 2007,47(1):33-35
Wang HX, Yang CL, Wei YH, Lin SB, Shen HY. Study of keyhole closure and analysis of microstructure and mechanical performance of weld joints for variable polarity vertical up plasma arc welding process, . Science and Technology of Welding and Joining. 2006, 11 (3): 315-325
邱灵, 杨春利, 林三宝, 伍昀, 基于移相全桥ZVS-PWM变极性焊接电源的设计, 焊接学报, 2006, 26(7):65-68
邱灵; 杨春利; 范成磊; 林三宝; 伍昀, A novel variable polarity welding power based on high-frequency pulse modulation, China Welding, 2006, 16(3):11-15
王后孝, 杨春利, 魏艳红, 沈鸿源, 变极性等离子弧立焊穿孔熔池的稳定建立, 机械工程学报, 2006,42(12):59-64
范成磊，梁迎春，杨春利， 程士军. 2519高强铝合金双丝GMAW焊接工艺, 焊接学报, 2006,27(10):15-18
范成磊 梁迎春 杨春利 朱亚萍, 铝合金高频感应热丝TIG焊接方法, 焊接学报, 2006,27(7):49-52
裴利程,范成磊,林三宝,杨春利, 中厚板铝合金VPPAW焊接工艺, 焊接技术, 2006,35(3):36-38
伏喜斌,林三宝,杨春利, 激光技术在焊接质量控制和检测中的应用, 焊接, 2006, (10):24-29
Lin sanbao, Yang Chunli, He Wanbin. Effect of fluxes with single component on weld depth in A-TIG welding of magnesium alloy. Transactions of Nonferrous Metals Society of China, 2005,Vol.15 Special 2:56-59
Yang chunli, Guo Lijie, Linsanbao, Shen Hongyuan, Mechanical properties of welded joints in vertial-up variable polarity plasma arc welding of 2219 aluminium alloy. Transactions of Nonferrous Metals Society of China. 2005,Vol.15 Special 2:83-86
张华, 林三宝, 吴林,冯吉才,宁金星, 镁合金AZ31搅拌摩擦焊接头断裂机制, 材料工程, 2005, (1)
郭立杰,杨春利,林三宝，沈鸿原, 穿孔法变极性等离子立焊收弧过程, 焊接学报, 2005, 26(5):53-55,60
范成磊, 杨春利, 程士军, 国旭明, 2519高强铝合金双丝MIG焊接接头时效弱化研究, 焊接, 2005,(11):24-27
Lin Sanbao, Gang Tie, Yang Chunli and Cui Hongbo, An initial study on welding procedure using tandem MIG welding of high strength aluminum alloy, China Welding, 2004, 13(2):1-5
杨春利，刚铁, 林三宝. 崔洪波, 高强铝合金厚板双丝MIG焊工艺的初步研究, 中国有色金属学报, 2004,14(s1):259-264
林三宝,杨春利, R J Beattie, 激光焊缝跟踪在厚壁压力容器焊接中的应用, 焊接, 2004,(11): 15-18
Chunli Yang, Sanbao Lin, Fengyao Liu, Lin Wu, and Qingtao Zhang. Research on the mechanism of penetration increase by flux in A-TIG welding, Journal of Material Science & Technology, 2003,19, sup.1:225-227
Liu Fengyao, Yang Chunli, Lin Sanbao, Wu Lin, Su Sheng. Effect of weld mictrostructure on weld properties in A-TIG welding of titanium alloy. Transactions of Nonferrous Metals Society of China. 2003,13(4):876-880
Yang Chunli, Lin Sanbao, Zhang Qingtao. Effect of YF3 on weld mictrostructure on performance of titanium alloy TC4 in TIG welding. Transactions of Nonferrous Metals Society of China, 2003,Vol. 13 Special 1:18-21
刘凤尧，杨春利，林三宝，吴林，张清涛. 活性化TIG焊熔深增加机理的研究, 金属学报, 2003,39(6):661-665
刘凤尧，杨春利，林三宝，吴林. A-TIG焊电弧的光谱分布特性的研究. 金属学报, 2003,39(8):875-878
魏艳红, 杨春利, 王敏, A welding document management software package based on a Client／Server structure, China Welding, 2003,12(1):72-77
林三宝，杨春利, 张文超, 基于视觉传感的脉冲TIG焊熔池一次图像获取的研究, 焊接, 2003,(1):21-23
京公网安备 11010802027423号