王忠金 - 哈尔滨工业大学 - 材料科学与工程学院

个人简介

教育经历 1978－1982年：哈尔滨科技大学金属材料与热处理专业学士学位 1986－1989年：吉林工业大学金属压力加工专业硕士学位 1992－1995年：吉林工业大学金属压力加工专业博士学位工作经历 1989－1996：解放军装甲兵技术学院讲师、副教授 1996－1998：哈尔滨工业大学材料科学与工程博士后流动站博士后 1999－至今：哈尔滨工业大学材料科学与工程学院材料工程系教授 2002－至今：哈尔滨工业大学材料科学与工程学院博士生导师 2006.12－2007.3 德国不来梅大学客座教授主要任职中国机械工程学会工业炉分会副总干事长、常务理事、青年工作委员会主任委员中国机械工程学会塑性成形分会加热学术委员会主任委员黑龙江省机械工程学会理事黑龙江省机械工程学会工业炉分会主任委员主要讲授课程《弹性与塑性力学基础》简介:针对本科生主要讲解材料从弹性变形到塑性变形直至断裂的有关力学问题，包括应力分析、应变分析、弹性力学的解题方法、屈服准则与应力-应变关系、塑性力学的解题方法和断裂力学概论。《材料加工过程数值模拟基础》简介:针对硕士生主要讲解材料加工数值模拟的基本原理与方法，涉及到弹塑性及刚塑性有限元法数值模拟理论基础和微观组织模拟等内容，包括有限元法的基本理论、基本公式的推导、基本求解方法等。

研究领域

难加工板材成形技术——主要以粘性介质压力成形（VPF）为研究内容，包括：(1) 粘性介质的粘度、应变速率敏感性、粘性附着力对板材变形的影响机制；(2) 板材与粘性介质界面之间变形的相互作用机制；(3) 高压粘性介质条件下板材成形装置结构理论；(4) 粘性介质压力系统的控制理论与技术；(5) 板材变形和粘性介质体积变形耦合过程有限元数值分析。材料加工理论和数值分析方法——(1)材料加工非均匀加载成形理论；(2) 体积成形过程静态与动态有限元分析理论与技术；(2) 板材成形和体积成形耦合过程有限元分析理论与技术；(3) 基于有限元分析的CAD/CAE一体化材料加工过程数值模拟技术。智能材料软模成形新方向——利用智能材料在特定负载条件下流变性发生改变的特性，将智能材料作为成形软模应用于冲压成形中，提高成形过程的可控性与材料的成形性。目前开展的研究主要包括：(1) 板材磁流变液成形方法研究； (2) 管材磁流变弹性体成形机理研究。电致塑性加工新方向——电塑效应是指材料在电的（电流，电场，电子辐射）作用下，变形抗力急剧下降，塑性提高的现象。利用电塑效应，在成形过程中给材料施加高密度电流，提高其成形性能。目前开展的研究主要包括：(1) 钛合金板材电塑成形新方法； (2) 钛合金电致塑性机理研究。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Ye-kun Feng, Shan-guang Shi, Zhong-jin Wang, Bo-yang Zhang, Yuan-peng Li. Precision forming of thin-walled hollow components with the complex surface by self-adaptive non-uniform pressure. Journal of Materials Processing Tech. 299 (2022) 117326. Ma Li, Wang Zhongjin. The Effects of Through-Thickness Shear Stress on the Formability of Sheet Metal—A Review. Journal of Manufacturing Processes. 2021, 71(11): 269-289. Ren Xiuwen, Wang Zhongjin. The mechanism of stress interaction induced by successive impacts in shot peening and wet peening zone. International Journal of Mechanical Sciences. 211 (2021) 106757. Zhang R, Wang Z J. Numerical simulation analysis of rubber flexible die properties on forming quality of the double-curved part for 6K21-T4 aluminum alloy. The International Journal of Advanced Manufacturing Technology, 2021, 113(3): 1097-1110. Cai Shupeng, Wang Zhongjin. Investigation of the generalized solution behavior for the transverse deflection of a rigid-plastic clamped plate: eccentric and multiple punches loading. Mechanics of Materials，2020,149:103543. Cai Shupeng, Wang Zhongjin. An analysis for three-dimensional upset forging of elliptical disks and rings based on the upper-bound method. International Journal of Mechanical Sciences，2020, 183:105835. Xiuwen Ren, Zhongjin Wang, Xiao Fang, Hui Song, Jie Duan, The plastic ？ow model in the healing process of internal microcracks in pre-deformed TC4 sheet by pulse current. Materials and Design 188 (2020) 108428. Wang Zhongjin，Zheng Lihuang，Wang Zhe. Characterization of forming limits at fracture for aluminum alloy 6K21-T4 sheets in non-linear strain paths using a biaxial tension/shear loading test. International Journal of Mechanical Sciences 184 (2020) 105672. Cai Shupeng, Liu Yan, Wang Zhongjin, Wang Pengyi. An analytical model and its corresponding numerical algorithm for viscous pressure bulging process considering the effects of rate-dependent tangential adhesive stress. The International Journal of Advanced Manufacturing Technology, 2020, 106(11-12): 5463-5481. ZHENG, L. H.; WANG, Z. J.; WANG, Z. Characterizing forming limits at fracture for aluminum 6K21-T4 sheets using an improved biaxial tension/shear loading test. International Journal of Mechanical Sciences, 2019, 159: 487-501. ZHENG, L. H.; WANG, Z. J.; SONG, H. Experimental Method for Multistage Loading Tests with Various Prestrain Paths.Experimental Mechanics, 2019, 59.1: 51-63. Xiang N, Wang Z, Cai S. Mechanism on increased sheet formability induced by tangential adhesive stress in sheet flexible forming process employing viscoplastic pressure-carrying medium[J]. International Journal of Machine Tools and Manufacture, 2018. CAI, Shu-Peng; WANG, Zhong-Jin. An analytical solution of eccentric transverse deflection in rigid-plastic solids.International Journal of Mechanical Sciences, 2018, 145: 188-199. Zheng L, Wang Z, Liu Z, et al. Formability and performance of 6K21-T4 aluminum automobile panels in VPF under variable blank holder force[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(1-4): 571-584. Wang Z, Xiang N, Wang P, et al. Property-adjustable forming medium induced extension of sheet metal formability under variable magnetic field[J]. Journal of Materials Processing Technology, 2017, 243: 420-432. Xiang N, Wang Z, Yi J, et al. Controlling of material flow in the quasi-bulk forming of thin-walled corrugated rings through optimization of contact pressure[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(5-8): 2077-2088. Wang P, Wang Z. Determination of the flow stress of a magnetorheological fluid under three-dimensional stress states by using a combination of extrusion test and FEM simulation[J]. Journal of Magnetism and Magnetic Materials, 2016, 419: 255-266. 王忠金.难变形板材复杂形状构件粘性介质压力成形技术[J].航空制造技术.2014(10):26-31 (特邀专稿) Zhong-jin Wang, Peng-yi Wang, Hui Song. Research on sheet-metal flexible-die forming using a magnetorheological fluid [J]. Journal of Materials Processing Technology, 2014, 214: 2200-2211 Wang Zhong-jin, Wang Peng-yi. Application of Magnetorheological Fluid in Bulge Tests of Sheet Metal[J]. Advanced Materials Research, 2014, 873: 82-90. Zhongjin Wang, Binxian Yuan.Numerical analysis of coupled finite element with element-free Galerkin in sheet flexible-die forming. Transactions of Nonferrous Metals Society of China. Volume 24, Issue 2, February 2014, Pages 462–469 SONG Hui, WANG Zhong-jin.Improvement of mechanical properties of cold-rolled CP Ti sheet by high density electropulsing[J],Trans. Nonferrous Met. Soc. China,2012,22(6):1350？1355 SONG Hui, WANG Zhong-jin, Effect of electropulsing on dislocation mobility of titanium sheet[J],Trans. Nonferrous Met. Soc. China,2012,22(7):1599？1605 Guan Jingjing, Wang Zhongjin, Zhang Yihe,Numerical Simulation Analysis of the Effect of Sheet Property on Forming Safety Margin of Drawing Panel[J],Advanced Materials Research,2012, 503-504: 863-866 Zhongjin Wang,Yan Liu. Experimental investigation on the effect of tangential viscous adhesive stress on the strain distribution of polycarbonate sheet[J], Materials Research Innovations, 2011,15(s1): s417~s421 J.-G. Li, Z.-J. Wang. Effect of boundary conditions of cylindrical shells on stabilisation of tube compression by viscous pressure forming[J], Materials Research Innovations,2011,15(S1): 253~256 Zhongjin Wang, Binxian Yuan. Numerical Analysis of Coupled Finite Element with Meshfree in Bulging Process of Sheet Elastic Flexible-Die Forming[J], Advanced Materials Research,2011,189-193:2054~2057 Zhongjin Wang, Jianwei Wang.The Research on Friction Impacting on Drawing High-Strength Steel[J],Advanced Materials Research,2011,189-193:1858~1861 Zhongjin Wang,Yan Liu. Investigation on deformation behavior of sheet metals in viscous pressure bulging based on ESPI[J],Journal of Materials Precessing Technology,2010,210(11):1536~1544 Wang Zhongjin, Liu Jian-guang. Li Yi ,Fracture prediction in non-isothermal viscous pressure bulging of aluminum alloy sheet using ductile fracture criterion[J], Journal of Central South University of Technology,2010,117(3):449~453 Zhong-jin Wang, Hui Song. Effect of high density electropulsing on microstructure and mechanical properties of cold-rolled TA15 titanium alloy sheet[J], Journal of Alloys and Compounds,2009,470:522~530 Wang Zhong-jin, Chen Li-Dong. Experimental research and numerical simulation of the dynamic cylinder upsetting[J],Materials Science and Engineering A,2009, 499(1-2): 138~141 Zhong-jin Wang, Hui Song. Effect of electropulsing on anisotropy behavior of CP Ti sheet[J],Transactions of Nonferrous Metals Society of China, 2009,19:s409-s413 Li Yi, Wang Zhong-Jin. Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming[J],Transactions of Nonferrous Metals Society of China,2009,19:s312~s317 Hui Song, Zhong-jin Wang. Microcrack healing and local recrystallization in pre-deformed sheet by high density electropulsing[J],Materials Science and Engineering A,2008, 490(1-2): 1~6 Wang Zhongjin, Li Yi.Formability of 6k21-t4 car panel sheet for viscoelastic-plastic flexible-die forming[J], Journal of Materials Processing Technology,2008, 201(1-3): 408~412 Wang Zhongjin, Song Hui.Deformation behavior of TC1 titanium alloy sheet metal under double-sided pressure[J],Transactions of Nonferrous Metals Society of China,2008, 18(1): 72~76 王忠金，塑性成形有限元方法，哈尔滨工业大学出版社，2017