近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Xu Yan, Hu Lianxi, Deng Taiqing, Ye Lei. Hot deformation behavior and processing map of as-cast AZ61 magnesium alloy. Materials Science and Engineering A, 559 (2013): 528-533
Yan Xu, Lianxi Hu, Yu Sun. Processing map and kinetic analysis for hot deformation of an as-cast AZ91D magnesium alloy. Materials Science and Engineering A, 578 (2013): 402-407
Xiaoya Liu, Lianxi Hu, Yi Mei. Kinetics of mechanically activated disproportionation of NdFeB alloy during reactive milling in hydrogen: experimental studies, mechanism and modelling. International Journal of Hydrogen Energy, 38 (2013): 13694-13701
Xiaoya Liu, Lianxi Hu, Li Yuping, etal. Grain texture, Nd content and processing condition effects on magnetic properties of NdFeB composite magnets. Modern Physics Letters, 27 (19) (2013): 1241026-1
Xiaoya Liu, Lianxi Hu. MC simulation of desorption-recombination reaction and grain growth of nano-structured disproportionated NdFeB alloy. Computational Materials Science, 67 (2013): 417-423
Xiaya Liu, Lianxi Hu. Desorption-recombination kinetics and mechanism of a mechanically milled nano-structured Nd16Fe76B8 alloy during vacuum annealing. Journal of Alloys and Compounds, 558 (2013) : 142-149
Liu Xiaoya, Li Yuping, Hu Lianxi. Nanocrystalline NdFeB magnet prepared by mechanically activated disproportionation and desorption-recombination in-situ sintering. Journal of Magnetism and Magnetic Materials, 330 (2013): 25-30
Yan Xu, Lianxi Hu, Yu Sun. Deformation behaviour and dynamic recrystallization of AZ61 magnesium alloy. Journal of Alloys and Compounds, 580 (2013) : 262-269
Wenzhen Chen, Xin Wang, Lianxi Hu, Erde Wang, Fabrication of ZK60 magnesium alloy thin sheets with improved ductility by cold rolling and annealing treatment, Materials and Design, 40(2012): 319-323
Xin Wang, Lianxi Hu, Kai Liu, Yinlin Zhang, Grain growth kinetics of bulk AZ31 magnesium alloy by hot pressing, Journal of Alloys and Compounds, 527(2012): 193-196
Hu Lianxi, Wang Heng, Wang Xin, Hydrogenation kinetics of ZK60 Mg alloy during solid-gas reaction milling in hydrogen, Journal of Alloys and Compounds, 513 (2012): 343-346
Wang Hailu, Wang Guojun, Hu Lianxi, Wang Erde, Effect of hot rolling on grain refining and mechanical properties of AZ40 magnesium alloy, Trans. Nonferrous Met. Soc. China, 21(S2) (2011): 229-233
Wang Xin, Chen Wenzhen, Hu Lianxi, Wang Guojun, Wang Erde, Microstructure refining and property improvement of ZK60 magnesium alloy by hot rolling, Trans. Nonferrous Met. Soc. China, 21(S2) (2011): 242-246
Deng Taiqing, Ye Lei, Sun Hongfei, Hu Lianxi, Development of flow stress model for hot deformation of Ti-47%Al alloy, Trans. Nonferrous Met. Soc. China, 21(S2) (2011): 308-314
Liu Xiaoya, Wang Xin, Sun Hongfei, Hu Lianxi, MC simulation in microstructure evolution and grain growth during desorption-recombination processing of NdFeB alloy, Trans. Nonferrous Met. Soc. China, 21(S2) (2011): 412-416
Miao Qing, Hu Lianxi, Wang Guojun, Wang Erde, Fabrication of Excellent Mechanical Properties AZ31 Magnesium Alloy Sheets by Conventional Rolling and Subsequent Annealing, Materials Science and Engineering A, 528 (22-23)(2011): 6694-6701
Miao Qing, Hu Lianxi, Wang Xin, Wang Erde, Grain growth kinetics of a fine grained AZ31 magnesium alloy produced by hot rolling, Journal of Alloys and Compounds, 493(1-2)(2010)：87-90
Wang Xin, Wang Heng, Hu Lianxi, Wang Erde, Nanocrystalline Mg and Mg alloy powders by hydriding-dehydriding processing, Trans. Nonferrous Met. Soc. China, 20(7) (2010): 1236-1330
Wang Heng, Hu Lianxi, Yuan Yuan, Wang Erde, Desorption behaviour and microstructure change of nanostructured hydrided AZ31 Mg alloy powders, Trans. Nonferrous Met. Soc. China, 20(4) (2010): 597-601
Hu Lianxi, Li Yuping, Yuan Yuan, Mechanically Activated Disproportionation and Microstructure Nanocrystallization of a Nd14Fe66.9Co11B8Zr0.1Ga1.0 Permanent Magnetic Alloy, Journal of Nanoscience and Nanotechnology, 9(12)(2009)：4404-4409
Miao Qing, Hu Lianxi, Sun Hongfei, Wang Erde, Grain refining and property improvement of AZ31 Mg alloy by hot rolling, Trans. Nonferrous Met. Soc. China, 19(S2) (2009): 326-330
Miao Qing, Hu Lianxi, Wang Erde, Liang Shujing, Chao Hongyin. Microstructure and mechanical properties of AZ31magnesium alloy sheet by hot rolling. International Journal of Modern Physics B, 2009, 23(6-7): 984-989
Yuan Yuan, Wang Heng, Hu Lianxi, Sun Hongfei, Fang Wenbin. Hydriding and microstructure nanocrystallization of ZK60 Mg alloy by reaction milling in hydrogen. Trans. Nonferrous Met. Soc. China, 2009, 19 (S2): 363-367
Hu Lianxi, Li Yuping, Yuan Yuan, and Shi Gang, Desorption-recombination and microstructure change of a disproportionated nano-structured NdFeB alloy, Journal of Materials Research, 23 (2) (2008): 427-434
Hu Lianxi, A. J. Williams, I. R. Harris, Effect of microstructural orientation on in situ electrical resistance monitoring during S-HDDR processing of a Nd16Fe76B8 alloy, Journal of Alloys and Compounds, 460 (2008) : 232-236
Wenxiong He, Erde Wang, Lianxi Hu, Yang Yu, Hongfei Sun, Effect of extrusion on microstructure and properties of a submicron crystalline Cu-5 wt.%Cr alloy, Journal of Materials Processing Technology, 208(13) (2008 ): 205-210
Hu Lianxi, Wu Yang, Yuan Yuan, Wang Heng, Microstructure nanocrystallization of a Mg-3 wt.%Al-1 wt.%Zn alloy by mechanically assisted hydriding–dehydriding, Materials Letters, 62 (2008): 2984-2987
Hu Lianxi, Wang Erde, Guo Bin, Shi Gang. Microstructure and magnetic properties of Nd2Fe24B/α-Fe nanocomposite prepared by HDDR combined with mechanical milling. Materials Science Forum, Vol. 434-536 (2007): 1349-1352
Wang Erde, Hu Lianxi. Nanocrystalline and ultrafine grained materials by mechanical alloying. Materials Science Forum, Vol. 434-536 (2007): 209-212
Shi Gang, Hu Lianxi, Wang Erde. Preparation, microstructure, and magnetic properties of a nanocrystalline Nd12Fe82B6 alloy by HDDR combined with mechanical milling, Journal of Magnetism and Magnetic Materials, 301 (2006): 319-324
Yu Yang, Hu Lianxi, Wang Erde, Microstructure and mechanical properties of a hot hydrostatically extruded 93W-4.9Ni-2.1Fe alloy, Materials Science and Engineering A, 435-436 (2006) : 620-624
Hu Lianxi, Li Yuping, Wang Erde, Yu Yang, Ultrafine grained structure and mechanical properties of a LY12 Al alloy prepared by repetitive upsetting-extrusion, Materials Science and Engineering A, 422 (2006): 327-332
Hu Lianxi, Yuan Yuan, Luo Shoujing, Fabrication, microstructure and mechanical properties of a SiCw/ZK51A Mg composite by semi-solid extrusion directly following liquid infiltration, Solid State Phenomena, Vols. 116-117 (2006): 354-357
Zhiming Du, Weiwei Shan, Yuntao Cui, Qiucai Peng, Lianxi Hu, Numerical Simulation of Pressure Influence on Workpiece Properties during Thixoforging, Solid State Phenomena, Vols. 116-117 (2006) : 167-172
Shi Gang, Hu Lianxi, Guo Bin, Sun Xiudong, Wang Erde. Nd2Fe14B/α-Fe nanocomposites prepared by mechanically activated disproportionation and subsequent desorption -recombination, Materials Science Forum, Vol. 475-479 (2005): 2185-2188
Hu Lianxi, Wang Erde, Hydrogen generation via hydrolysis of nanocrystalline MgH2 and MgH2-based composites, Trans. Nonferrous Met. Soc. China, 2005, 15 (5): 965-969
Fang Wenbin, Hu Lianxi, He Wenxiong, Wang Erde, Microstructure and properties of a TiAl alloy prepared by mechanical milling and subsequent reactive sintering, Materials Science and Engineering A, 403 (2005) : 186-190
京公网安备 11010802027423号