近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Haixia Yang, et al. A novel silica aerogel/porous Si3N4 composite prepared by freeze casting and sol-gel impregnation with high-performance thermal insulation and wave-transparent. Materials Letters 138(2015):135-138.
Haixia Yang, et al. Microstructure and properties of the Si3N4/silica aerogel composites fabricated by the sol-gel method via ambient pressure drying. Materials & Design 85(2015):438-443.
Shaojie Lin, et al. Fabrication and properties of porous boron nitride/silicon oxynitride ceramic composites via gas pressure sintering.Materials & Design 87(2015):272-277.
Shaojie Lin, et al. Mechanical, dielectric properties and thermal shock resistance of porous silicon oxynitride ceramics by gas pressure sintering.Materials Science & Engineering A 635(2015):1-5.
Biao Zhang, et al. High-k and ultra-low-loss BADCy/Ni0.5Ti0.5NbO4 composites for PCB application fabricated by cold isostatic pressing and vacuum assisted infiltration processes. Journal of Materials Science Materials in Electronics 26.10(2015):7823-7828.
Biao Zhang, et al. Dielectric Properties of BADCy/Ni0.5Ti0.5NbO4 Composites with Novel Structure Fabricated by Freeze Casting Combined with Vacuum Assisted Infiltration Process. Composites Science & Technology 119(2015):75-84.
Biao Zhang, et al. Fabrication and Properties of BADCy /Ni0.5Ti0.5NbO4/ZnNb2O6 Composites for Dielectric Device Application. Journal of Alloys & Compounds 658(2015):476-482.
Shichao Liu, et al. Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing. Materials & Design 66(2015):331-335.
Feng Ye, et al. A route to increase fracture toughness of layered Si3N4/SiC composite using interlocked interfaces. Ceramics International 41.8(2015):10331–10335.
Shichao Liu, et al. A new way of fabricating Si3N4 ceramics by aqueous tape casting and gas pressure sintering. Journal of Alloys & Compounds 647(2015):686-692.
Shichao Liu, et al. Preparation of Aluminum Nitride Ceramics by Aqueous Tape Casting. Materials & Manufacturing Processes 30.5(2015):605-610(6).
Shichao Liu, et al. Fabrication and properties of SiC/Si3N4 multilayer composites with different layer thickness ratios by aqueous tape casting.Ceramics International 41.10(2015):12917-12922.
Shichao Liu, et al. Production of Si3N4/Glass Composites for LTCC Substrate by Aqueous Tape Casting Process. International Journal of Applied Ceramic Technology 13.1(2015):61-68.
Lianbing Zhong, et al. Transient liquid phase sintering of tantalum carbide ceramics by using silicon as the sintering aid and its effects on microstructure and mechanical properties. Materials Chemistry & Physics 149-150.5(2015):505-511.
Q. Liu, F Ye, Y Gao, S. C. Liu, H. X. Yang, Zhou, Z. Q. Zhou, Fabrication of a new SiC/2024Al co-continuous composite with lamellar microstructure and high mechanical properties, Journal of Alloys and Compounds, 585 : 146-153, 2014
Q. Liu, F Ye, Y Gao, S. C. Liu, H. X. Yang, Z. Q. Zhou, Development of elongated 6H-SiC grains in reaction-bonded porous SiC ceramics, Scripta Materialia, 71: 13-16, 2014
Z. Q. Zhou, L. Guo, H. X. Yang, Q. Liu, F. Ye, Hydrothermal synthesis and magnetic properties of multiferroic rare-earth orthoferrites, Journal of Alloys and Compounds, 583: 21-31, 2014
Q. Liu, F. Ye, Z. P. Hou, S. C. Liu, Y Gao, H. J. Zhang, A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength, Journal of the European Ceramic Society, 33(13-14): 2421-2427, 2013
J. M. Ma, F Ye, Z. Hua, Microstructure and mechanical properties of BAS/SiC composites sintered by spark plasma sintering, Materials Characterization , 84: 100-104, 2013
C. F. Liu, F. Ye, R. S. Xia, L. Zhang, Y. Zhou, Y. D. Huang, Influence of Composition on Self-toughening and Oxidation Properties of Y-alpha-Sialons, Journal of Materials Science & Technology, 29(10): 983-988, 2013.
L. M. Liu, L. B. Zhong, B. Y. Zhang, Z. H. Lai, F. Ye, Z. G. Zhang, Y. Zhou, Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au, Scripta Materialia, 69(8): 574-577, 2013
Z. Q. Zhou, L. Guo, F Ye, Hydrothermal synthesis, magnetism and resistivity of orthorhombic perovskite manganates Y1-xCaxMnO3 (x=0, 0.07, 0.55, 0.65), Journal of Alloys and Compounds, 571: 123-131, 2013
Z. P. Hou, F. Ye, L. M. Liu, Q. Liu, H. J. Zhang, Effects of solid content on the phase assemblages, mechanical and dielectric properties of porous alpha-SiAlON ceramics fabricated by freeze casting, Ceramics International, 39(2): 1075-1079, 2013
L. M. Liu, Z. P. Hou, B. Y. Zhang, F. Ye, Z. G. Zhang, Y. Zhou, A new heating route of spark plasma sintering and its effect on alumina ceramic densification, Materials Science and Engineering A, 559: 462-466, 2013
Z. P. Hou, F Ye, L. M. Liu, Q. Liu, Fabrication of gradient porous β-SiAlON ceramics via a camphene-based freeze casting process, Materials Science and Engineering A, 558:742-746, 2012
L. Guo, Z. Q. Zhou, P. Y. Jia, F. Ye, Quantitative Analysis of Nanometer Anatase-Rutile Mixtures via Experimentation and Theoretical Calculation, Journal of Nanoscience and Nanotechnology, 12(12):8969-8974, 2012
H. Liu, L. M. Liu, F. Ye, Z. G. Zhang, Y. Zhou, Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites: Effects of sintering temperatures, Journal of the European Ceramic Society, 32(13):3617-3625, 2012
L. M. Liu, H. Liu, F. Ye, Microstructure and mechanical properties of the spark plasma sintered Ta2C ceramics, Ceramics International, 38(6): 4707-4713,2012
L. M. Liu, F. Ye, S. W. Zheng, B. Peng, W. Luo, Z. G. Zhang, Y. Zhou, Light transmittance in alpha-SiAlON ceramics: Effects of composition, microstructure, and refractive index anisotropy, Journal of the European Ceramic Society, 32(10): 2487-2494, 2012
L. M. Liu, F. Ye, Y. Zhou, Microstructure and mechanical properties of the α-sialon/α-SiC composites: effects of heat treatment, Ceramics International, 37(8): 3737-3741, 2011
L. M. Liu, F. Ye, Z. G. Zhang, Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites, Materials Science and Engineering A, 529: 479-484, 2011
L. M. Liu, F. Ye, X. L. He, Y. Zhou, Synthesis of alpha-SiC/alpha-SiAlON composites by spark plasma sintering: Phase formation and microstructures development, Journal of the European Ceramic Society,31:2129–2135, 2011
L. M. Liu, F. Ye, Y. Zhou, Electric Current Pulse Activated 6H→3C Transformation in Silicon Carbide Compacts, Journal of the American Ceramic Society, 94 (9) :2767–2771, 2011
Y. J. Wang, , H. X. Peng, F. Ye, Y. Zhou, Effect of TiB2 content on microstructure and mechanical properties of in-situ fabricated TiB2/B4C composites, Transactions of Nonferrous Metals Society of China, 21(2):S369-S373, 2011
F. Ye, L. M. Liu, H. J. Zhang, Mechanical Properties and thermal shock resistance of refractory self-reinforced α-sialons using barium aluminosilicate as an additive, International Journal of Applied Ceramic Technology, 8(4): 928-939, 2011
L. M. Liu, F. Ye, Y. Zhou, New route to densify tantalum carbide at 1400°C by spark plasma sintering , Materials Science and Engineering A,528: 4710–4714, 2011
L. M. Liu, F. Ye, X. L. He, Y. Zhou, Q. Liu, Densification process of TaC/TaB2 composite in spark plasma sintering, Materials Chemistry and Physics,126:459–462, 2011
L. M. Liu, F. Ye, Z. G. Zhang, Y. Zhou, Elongation of alpha-SiC Particles in Spark Plasma Sintered alpha-SiAlON/alpha-SiC Composites, Journal of the American Ceramic Society, 94(2): 336–339, 2011
X. He, F. Ye, L. M. Liu, H. J. Zhang, Microstructure and thermal conductivity of spark plasma sintering AlN ceramics, Materials Science and Technology, 27(2):513-517, 2011
F. Ye, J. Y. Zhang, L. M. Liu, H. J. Zhang, Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze casting, Materials Science and Engineering A,528:1421-1424, 2011
L. M. Liu,F. Ye,Y. Zhou, Z. G. Zhang, Microstructure and Mechanical Properties of Spark Plasma Sintered TaC0.7 Ceramics, Journal of the American Ceramic Society, 93 (10): 2945-2947, 2010
F Ye, Z. P. Hou, H. J. Zhang, L. M. Liu, Densification and Mechanical Properties of Spark Plasma Sintered B4C with Si as a Sintering Aid, Journal of the American Ceramic Society, 93(10): 2956-2959, 2010
J. M. Ma, F Ye, Y. G. Cao, C. F. Liu, H. J. Zhang, Microstructure and mechanical properties of liquid phase sintered silicon carbide composites, Journal of Zhejiang University-Science A, 11(10), SI: 766-770, 2010
J. Y. Zhang, F. Ye, Effect of agarose content on microstructures and mechanical properties of porous silicon nitride ceramics produced by gelcasting, Journal of Zhejiang UniversityScience A, 11(10):771-775, 2010
X. L. He, F. Ye, H. J. Zhang, Z.Q. Zhou, Study on microstructure and thermal conductivity of Spark Plasma Sintering AlN ceramics, Materials and Design, 31(9): 4110-15, 2010
F. Ye, J. Y. Zhang, H. J. Zhang, L. M. Liu, Effect of sintering temperature on microstructure and mechanical properties of highly porous silicon nitride ceramics produced by freeze casting, Materials Science and Engineering A, 527(24-25): 6501-6504, 2010
F. Ye, L. Zhang, C. F. Liu, L. M. Liu, H. J. Zhang, Thermal shock resistance of in situ toughened α-SiAlONs with barium aluminosilicate as an additive sintered by SPS, Materials Science and Engineering A, 527(23): 6368-6371, 2010
F. Ye, J. Y.Zhang, H. J. Zhang, L. M. Liu, Pore structure and mechanical properties in freeze cast porous Si3N4 composites using polyacrylamide as an addition agent, Journal of Alloys and Compounds, 506(1): 423-427, 2010
L. M. Liu, F. Ye, Y. Zhou, Z. G. Zhang, Q. L. Hou, Fast bonding α-SiAlON ceramics by spark plasma sintering, Journal of the European Ceramic Society, 30 (12): 2683-2689, 2010
L. M. Liu, F. Ye, Y. Zhou, Z. G. Zhang, Thermal shock damage of the self-reinforced α-SiAlON ceramic using barium aluminosilicate glass ceramic as the sintering additive, Materials Science and Engineering A, 527(21-22): 5378-5382, 2010
H. J. Zhang, F. Ye, L. M. Liu, H. F. Xu, C. Sun, Synthesis of indium tin oxide nanotubes using 2-methoxyethanol as solvent via simple template method, Journal of Alloys and Compounds, 504(1): 171-176, 2010
X. L. He, F. Ye, H. J, Zhang, L. M. Liu, Study of rare-earth oxide sintering additive systems for Spark Plasma Sintering AlN ceramics, Materials Science and Engineering A, 527(20) :5268-5272, 2010
F, Ye, Z. W. Dong, H. J. Zhang, Thermally stable mesoporous zirconia prepared via post-synthesis hydrothermal restructuring, Materials Letters, 64(13): 1441-1444, 2010
H. J. Zhang, F Ye, H. F. Xu, L. M. Liu, H. F. Guo, Synthesis of carbon hollow particles by a simple inverse-emulsion method, Materials Letters, 64(13):1473-1475, 2010
F Ye, Z. P. Hou, H. J. Zhang, L. M. Liu, Y. Zhou, Spark plasma sintering of cBN/beta-SiAlON composites, Materials Science and Engineering A, 527(18-19): 4723-4726, 2010
L. M. Liu, F. Ye, Y. Zhou, Z. G. Zhang, Microstructure compatibility and its effect on the mechanical properties of the α-SiC/β-Si3N4 co-reinfaorced barium aluminosilicate glass ceramic matrix composites, Scripta Materials, 63(2):166-169, 2010
F. Ye, H. F. Guo, H. J. Zhang, X. L. He, Polymeric micelle-templated synthesis of hydroxyapatite hollow nanoparticles for a drug delivery system, Acta Biomaterialia, 6(6): 2212-2218,2010
X. L. He, F. Ye Z. Q. Zhou, H. J. Zhang, Thermal conductivity of Spark Plasma Sintered AlN ceramics with multiple components sintering additive, Journal of Alloys and Compounds, 496(1-2):413-417, 2010
F. Ye, L. M. Liu, H. J. Zhang, B. S. Wen, Thermal shock behavior of 30wt% BAS/Si3N4 self-reinforced composite, Journal of Alloys and Compounds, 493 (1-2): 272-275, 2010
J. M. Ma, F. Ye, L. M. Liu, H. J. Zhang, Processing and microstructure characterization of liquid-phase-sintered, alpha-SiC matrix composites, Journal of Alloys and Compounds, 493(1-2):L15-L18, 2010
F. Ye, L. Zhang, H. J. Zhang, Rapid densification and reaction sequences in self-reinforced Y-alpha-SiAlON ceramics with barium aluminosilicate as an additive, Materials Science and Eengineering A, 527 (1-2): 287-291, 2009
J. M. Ma, F. Ye, L. M. Liu, H. J. Zhang, J. Yu, Q. C. Meng, X. M. Zhang, Fabrication, Microstructure and Mechanical Properties of Silicon Carbide Short Fiber/Si3N4p-Reinforced BAS composites, Rare Metal Materials and Engineering, 38: 423-426, 2009
F. Ye, H. J. Zhang, H. F. Xu, C. Sun, Y. D. Sun, Q. C. Meng, Y. Zhou, Preparation and Hydrogen Sensing Properties of ITO Nanotubes by Sol-Gel Method Combined with Porous Anodic Aluminum Oxide Template, Rare Metal Materials and Engineering, 38(2): 1083-1086, 2009
H. J. Zhang, F.Ye, H.F Xu, Y. D. Sun, C; Sun, Q. C. Meng, Y. Zhou, Preparation and Characterization of SnO2 Hollow Spheres by Hydrothermal Method, Rare Metal Materials and Engineering, 38(2): 1087-1090, 2009
Z. W. Dong, F. Ye, H. J. Zhang, Mesoporous structure stability of zirconium-doped mesoporous silica at elevated temperature, Materials Letters, 63(27): 2343-2345, 2009
F. Ye, C. F. Liu, L. M. Liu, Optical properties of in situ toughened ScLu-alpha-SiAlON, Scripta Materialia, 61(10): 982-984, 2009
F. Ye, Z. W. Dong, H. J. Zhang, n-Hexane isomerization over copper oxide-promoted sulfated zirconia supported on mesoporous silica, Catalysis Communications, 10(15): 2056-2059, 2009
J. M. Ma, F. Ye, L. M. Liu, Processing and mechanical properties of short fibers/Si3N4 reinforced BaO·Al2O3·2SiO2 ceramic matrix composites, Materials Science and Engineering A, 520 (1-2): 158-161, 2009
X. L. He, F. Ye, H. J. Zhang, L. M. Liu, Effect of Sm2O3 content on microstructure and thermal conductivity of Spark Plasma Sintered AlN ceramics, Journal of Alloys and Compounds, 482(1-2):345-348, 2009
C. F. Liu, F. Ye, L. M. Liu, High-temperature strength and oxidation behavior of Sc3%2B/Lu3%2B co-doped alpha-sialon, Scripta Materialia, 60 (11): 929-932, 2009
C. F. Liu, F. Ye, L. M. Liu, Effect of post heat treatment on microstructure and mechanical properties of Lu-doped alpha-SiAlONs, Journal of Alloys and Compounds, 475 (1-2): 735-740, 2009
F. Ye, C. F. Liu, L. M. Liu, Microstructure and mechanical properties of multi-cation containing alpha-sialons, Ceramics International, 35(2): 725-731, 2009
L. M. Liu, F. Ye, H. J. Zhang, Yu, Z. G. Zhang, Celsian formation in Si3N4-Ba0.75Sr0.25Si2Al2O8 composites, Scripta Materialia, 60 (6): 463-466, 2009
F. Ye, L. M. Liu, H. J. Zhang, Novel mixed alpha/beta-SiAlONs with both elongated alpha and beta grains, Scripta Materialia, 60 (6): 471-474, 2009
京公网安备 11010802027423号