研究领域
1．镁合金精密成型技术
2．生物镁合金材料制备及塑性成形技术
3．模具CAD/CAE/CAM技术
4．3D打印及增材制造技术开发与应用
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Yandong YU,Kaifeng ZHANG,Hairong ZHENG,Daming JIANG.”Numerical Simulation and Experiment of Cavity Growth During Superplastic Bulging of Magnesium Alloy ZK60.ACTA metallurgica sinica 2004, 17(3):295-298, EI
2. YuYandong;zhangKaifeng;ZhengHairong;JiangDaming.”Numerical simulation and experimental study of cavity growth in Uniaxial Tensile of Magnesium Alloy”. Trans. Nonferrous Met. Soc. China.2003,6,SCI
3. YuYandong;zhangKaifeng;JiangDaming;ZhengHairong;WangGang.”Experimental and Micro-mechanism Analysis on the Diffusion-Bonding and Superplasticity Magnesium alloy”. China Welding, 2002.2, EI
4. Yu Yandong,Li Qiang .Diffusion Bonding in Superplastic ZK60 Magnesium Alloy. Materials Science Forum.2005,488-489.SCI
5. Yu Yandong, Jiang Haiyan,Zai Chunquan,DingWenjiang。Superplasticity and Diffusion Bonding on Magnesium Alloy ZK60 Trans. Nonferrous Met. Soc. China.2005,12 SCI
6. YU Yan-dong, LI Cai-xia. Numerical simulation of magnesium alloy AZ31B sheets with thermal deep-drawing process. Materials Science Forum, 2007, 546-549: 289-292 ISTP
7. YU Yan-dong, Wang Chang-wen. Influence of diffusion bonding for superplasticity magnesium alloys with the pre and post treatment, Materials Science Forum, 2007, 551-552, ISTP
8. YU Yan-dong, Wang Chang-wen, Wang Chang-li. SPF/DB research in ZK60 alloy with gasification agent as pressurization mediator. Materials Science Forum, 2007, 551-552, ISTP
9. Yu yan-dong,Yin de-liang,Zhang bao-you. Study on Cavity Growth in Uniaxial Tension of ZK60 Magnesium Alloy. Key Engineering Material. Vols. 353-358. 2007, pp. 687-690 EI
10．Effect of heat treatment on microstructure, hardness and rollability of V55Ti30Ni15 alloy membranes, Materials and design, 2014/6/10,SCI
11. Effect of heat treatment on precipitate free zones and rollability of V55Ti30Ni15 alloys，Intermetallics，2014/4/20，SCI
12. The effect of solution heat treatments on the microstructure and hardness of ZK60 magnesium alloys prepared under low-frequency alternating magnetic fields, Materials Science & Engineering A, 2013, 559: 22-28, SCI
13. Superplastic formability of AZ31 magnesium alloy Sheets produced by twin roll casting and Sequential hot rolling[J]. Modern Physics Letters B, 2013, 27(19). SCI, EI
14. 电磁搅拌对等通道挤压前后Mg-Zn-Zr-Ca 合金组织和性能的影响，中国有色金属学报，2014/6，EI
15. 透氢非钯基金属膜研究进展. 稀有金属材料与工程, 2013, 42(4): 868-874.SCI, EI
16. 铜箔在锂离子二次电池中的应用与发展[J]. 中国有色金属学报, 2012, 22(12): 3504-3510. EI
17. Property and microstructure analysis of ZK60 alloy superplastic sheet” Journal of Harbin Institute of Technology ( New Series)，2011, 18(3):33-36EI
18. MB15 合金等通道转角挤压组织模拟和实验分析, 中国有色金属学报,2011,2,
19. 镁合金双层板结构的超塑成形/扩散连接工艺及数值模拟研究, 材料科学与工艺, 2011(19)1:80-84, EI
20. Microstructures and mechanical properties of AZ31+Sr+Y magnesium alloy sheets produced by twin-roll casting and sequential hot rolling. Advanced Materials Research, 2013, 765-767: 3176-3179.EI
京公网安备 11010802027423号