Rometsch, Paul - Monash University - Department of Materials Science and Engineering

研究领域

Research interests include alloy development, strengthening mechanisms, phase transformations, heat treatment and various processing technologies that may be applied to the industrial production of aluminium or other metal products. Improved alloy performance, especially for aerospace, automotive and electrical conductor applications, is achieved by understanding and manipulating the process and its metallurgy along the whole value chain. This covers a broad spectrum of alloys and processing methods, including conventional cast/wrought products, advanced manufacturing such as laser additive manufacturing (3D printing) of metals, and high performance materials such as aluminium-scandium alloys or nickel-based superalloys. Experimental work is complemented by process-microstructure-property modelling where possible.

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Starink MJ, Milkereit B, Zhang Y, Rometsch PA, Predicting the Quench Sensitivity of Al-Zn-Mg-Cu Alloys: A Model for Linear Cooling and Strengthening, Journal of Materials and Design, in press (2015) doi: 10.1016/j.matdes.2015.09.058. Zhang Y, Milkereit B, Weyland M, Rometsch PA, Precipitation of a New Platelet Phase During the Quenching of an Al-Zn-Mg-Cu Alloy, submitted to Nature Scientific Reports, under review (2015). Zhong H, Rometsch PA, Cao LF, Estrin Y, The Influence of Mg/Si Ratio and Cu Content on the Tensile Ductility and Stretch Formability of 6xxx Aluminium Alloys, submitted to Materials Science and Engineering A, under review (2015). Kairy SK, Alam T, Rometsch P, Davies C, Banerjee R, Birbilis N, Understanding the Origins of Intergranular Corrosion in Copper-Containing Al-Mg-Si Alloys, submitted to Metallurgical and Materials Transactions A (Communications), under review (2015). Kairy S, Birbilis N, Rometsch P, Davies C, The Influence of Copper Additions and Ageing on the Microstructure and Metastable Pitting of Al-Mg-Si Alloys, Corrosion, in press (2015) http://dx.doi.org/10.5006/1840. Knight SP, Pohl K, Holroyd NJH, Birbilis N, Rometsch PA, Muddle BC, Goswami R, Lynch SP, Some Effects of Alloy Composition on Stress Corrosion Cracking in AlZnMgCu Alloys, Corrosion Science, 98 (2015) 50-62. Rometsch PA, Zhong H, Nairn KM, Jarvis T, Wu X, Characterization of a Laser-Fabricated Hypereutectic Al-Sc Alloy Bar, Scripta Materialia, 87 (2014) 13-16. Rometsch PA, Zhang Y, Knight S, Heat Treatment of 7xxx Series Aluminium Alloys Some Recent Developments, Transactions of Nonferrous Metals Society of China, 24 (2014) 2003-2017. Zhong H, Rometsch PA, Estrin Y, Effect of Alloy Composition and Heat Treatment on Mechanical Performance of 6xxx Aluminium Alloys, Transactions of Nonferrous Metals Society of China, 24 (2014) 2174-2178. Xu DK, Rometsch PA, Li L, Shen LM, Birbilis N, Critical Conditions for the Occurrence of Quench Cracking in an Al-Zn-Mg-Cu Alloy, Journal of Materials Science, 49 (2014) 4687-4697. Rometsch PA, Pelliccia D, Tomus D, Wu X, Evaluation of Polychromatic X-Ray Radiography Defect Detection Limits in a Sample Fabricated from Hastelloy X by Selective Laser Melting, NDT&E International, 62 (2014) 184-192.