陈文振 - 哈尔滨工业大学（威海）

个人简介

工学博士，教授，博士生导师，哈尔滨工业大学（威海）材料学院威海市轻量化材料与成形工程技术研究中心主任航空航天新型材料应用及紧固件产业战略联盟（省级）副秘书长已承担国家自然科学基金-青年/面上、山东省重点研发、山东省自然科学基金、山东省科技发展计划等省部级以上项目6项，技术负责山东省重大创新工程等重大项目3项；一作/通讯发表SCI论文36篇，其中TOP期刊30篇，累积引用1000余次；授权国家发明专利7项，专利孵化校企2家，获得2021年山东省科学技术进步二等奖（排名2/9）、2017年山东省科学技术进步二等奖（排名2/9）、2016年威海市校地合作人才资助计划奖励等奖励。教育经历 2009/9 - 2013/7，哈尔滨工业大学，材料加工，工学博士 2007/9 - 2009/7，哈尔滨工业大学，材料加工，工学硕士 2003/9 - 2007/7，哈尔滨工业大学（威海），材料成型及控制工程，工学学士 2013/10 - 2017/08，哈尔滨工业大学（威海），材料科学与工程学院，讲师 2016/05 - 至今，哈尔滨工业大学（威海），材料加工工程，硕导 2017/09 - 2022/12，哈尔滨工业大学（威海），材料科学与工程学院，副教授 2021/05 - 至今，哈尔滨工业大学，材料加工工程，博导 2022/12 - 至今，哈尔滨工业大学（威海），材料科学与工程学院，教授

研究领域

轻质金属材料塑性成形与强韧化技术方向概述：聚焦于制造行业需求广泛的轻质镁、钛合金材料，着眼于解决制约其生产与应用的系瓶颈问题，重点开辟了高性能镁合金变路径控温塑变制造、非均质钛基材料塑变烧结制备与成形等富有特色和产业化前景的研究方向，为镁、钛轻质材料产业发展和应用拓展提供多项关键共性技术支撑。轻质金属材料本构模型与多尺度集成计算方向概述：面向轻质金属材料工程设计需要，集成采用有限元仿真和晶体塑性模型，优化开发塑变过程组织演化预测及调控技术，丰富轻质金属材料使役性能的组织调控策略，搭建高性能轻质金属材料塑性加工原型技术的集成仿真设计平台，推动相关学术发展和技术转化应用。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Adjusting approaches of basal texture for improvement of tension-compression asymmetry in extruded magnesium alloys Extrusion techniques on microstructure optimization and quantitative analysis of texture influence on ductility improvement for heat-resistant Mg–Nd–Zn–Zr magnesium alloy Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 Mg alloy via multi-directional impact forging Improving low-cycle fatigue life of ZK61 magnesium alloy via basal texture weakening by the compression-extrusion process Reducing the cyclic tension-compression asymmetry and cyclic hardening of ZK61 magnesium alloy via the compression-extrusion process High strength and plasticity TiBw/TA15 composites with a novel columnar network structure Effects of the Extrusion Ratio on the Microstructure and Mechanical Properties of the Columnar Network Structure Tibw/Ta15 Composites Fabricated by Powder Compact Extrusion The Room Temperature Fracture Behaviors of GNPs/TA15 Composites by Pre-Sintering and Hot Extrusion Effects of mixing methods on the interface and microstructure evolution of graphene platelets/Ti-6Al-4V powder composites fabricated by powder metallurgy and extrusion The graphene nanoplatelets evolution and interface reaction of graphene nanoplatelets/TA15 composites by pre-sintering and hot extrusion Evolution of the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Sheets during Multi-Pass Lowered-Temperature Rolling Comparison Study between Surface Bending and Base Bending in the Bending Strength and the Microstructure Variation for FSWed ZM6 Sheet Microstructural Evolution and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated by High-Pressure Torsion under Ageing Treatment Effects of GNPs on variant selection during quenching of Ti6Al4V matrix composites prepared by hot extrusion Formation mechanism of 〈 texture connected with excellent ductility during hot extrusion in Mg-9Gd-5Y-0.5Zr alloy Effects of asymmetric basal texture on the stretchability and the microstructure variations for the rolled ZK60 magnesium alloy sheet Effects of Extrusion Ratio on the Microstructure, Texture and Mechanical Properties of Mg-2.5Nd-0.5Zn-0.5Zr Alloy Sheets Effect of Tension Temperature on the Anisotropy of Tensile Behavior for Az31 Alloys: A Visco-Plastic Self-Consistent Analysis Microstructural characterization and mechanical response of the extruded ZK61 magnesium alloy under dynamic and quasi-static loading Temperature influenced microstructure evolution and strengthening of 4.5 vol% TiBw/TA15 composites with columnar-reinforced structure fabricated by pre-sintering and hot extrusion Unveiling the mechanical response and deformation mechanism of extruded Mg-2.5Nd-0.5Zn-0.5Zr alloy sheet under high-temperature tensile Asymmetry evolutions in microstructure and strain hardening behavior between tension and compression for AZ31 magnesium alloy Microstructure, texture and mechanical properties of extruded AZ31 Mg alloy during small strain multi-directional forging with gradient cooling Hot Deformation Behavior, Processing Maps and Microstructural Evolution of the Mg-2.5Nd-0.5Zn-0.5Zr Alloy Controlling the microstructure and fracture toughness of the Ti-5Al-5Mo-5V-1Cr-1Fe alloy by multiple heat treatments Effect of pre-solution treatment on the texture and the mechanical properties of hot-extruded Mg-2.6Nd-0.55Zn-0.5Zr alloys Effects of Mixing Methods on the Interface and Microstructure Evolution of Gnps/Ti-6al-4v Matrix Composites Fabricated by Pre-Sintering and Extrusion The Gnps Evolution and Interface Reaction Mechanism of Gnps/Ta15 Composites by Pre-Sintering and Canned Hot Extrusion Preparation of Multiscale α Phase by Heat Treatments and Its Effect on Tensile Properties in Metastable β Titanium Alloy Sheet Texture role in the mechanical property improvement contributed by grain refinement for Mg-2.6Nd-0.55Zn-0.5Zr alloy subjected to extrusion process Unveiling the microstructure evolution based on deformation mechanisms and dynamic recrystallization in as-extruded AZ31 Mg alloys during uniaxial compression Effects of the interface and mechanical properties of GNPs/TA15 composites through adding B powders Dissimilar diffusion bonding behaviour of Ti 2 AlNb alloy and TiBw/Ti64 composites using the Ti interlayer High-temperature deformation behavior and microstructure evolution of TiBw/Ti6Al4V composites during hot shear-compression deformation Evolution of Microstructures, Texture, Damping and Mechanical Properties of Hot Extruded Mg-Nd-Zn-Zr Alloy Improvement of tension/compression asymmetry for high-performance ZK61 magnesium alloy rod via tailoring deformation parameters: Upsetting-extrusion temperature and upsetting ratio Improving the ductility of Mg-2.5Nd-0.5Zn-0.5Zr alloy by multi-pass hot rolling Improving Tension/Compression Asymmetry of a Hot‐Extruded Mg–Zn–Y–Zr Alloy via Yttrium Addition Precipitation Behavior of Silicide and Synergetic Strengthening Mechanisms in TiB-Reinforced High-Temperature Titanium Matrix Composites During Multi-Directional Forging Microstructure and texture evolution during compression-extrusion process for tension/compression symmetrical ZK61 magnesium alloy rod The Interface of GNPs/Ti-6Al-4V Composites Influenced by the Defect Density of GNPs The Sticking Out Mechanism and Growth of TiB Whiskers from TiBw/Ti-6Al-4V Composites during Sintering Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling Deformation behavior and softening mechanism of TiB reinforced near-α titanium matrix composite during hot compression Strengthening effects of in-situ synthetic nano-TiC particles on Ti64 based nanocomposites through adding graphene nanoplatelets Microstructure evolution and high-temperature tensile behavior of the powder extruded 2.5 vol.% TiBw/TA15 composites Critical Rolling Process Parameters for Dynamic Recrystallization Behavior of AZ31 Magnesium Alloy Sheets Improved tension/compression asymmetry achieved in high-strength magnesium alloys via compression-extrusion process Microstructure evolution and mechanical performance improvement of thin ZK61 magnesium alloy sheets subjected to cumulative cold rolling and intermediate annealing Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of 2.5 vol% TiBw/TA15 Composites with Different Deformation Statuses Role of one direction strong texture in stretch formability for ZK60 magnesium alloy sheet Evolution of microstructure, texture and mechanical properties of ZK60 magnesium alloy in a single rolling pass Weakened anisotropy of mechanical properties in rolled ZK60 magnesium alloy sheets with elevated deformation temperature Fine-grained structure and recrystallization at ambient temperature for pure magnesium subjected to large cold plastic deformation Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling Effect of initial texture on the bending behavior, microstructure and texture evolution of ZK60 magnesium alloy during the bending process High temperature tensile fracture characteristics of the oriented TiB whisker reinforced TA15 matrix composites fabricated by pre-sintering and canned extrusion The Effect of Grain Size on the Strain Hardening Behavior for Extruded ZK61 Magnesium Alloy Effects of Texture and Grain Size on the Yield Strength of ZK61 Alloy Rods Processed by Cyclic Extrusion and Compression Microstructure and tensile properties of Mg-3Al-1Zn sheets produced by hot-roller-cold-material rolling Room temperature tensile fracture characteristics of the oriented TiB whisker reinforced TA15 matrix composites fabricated by pre-sintering and canned extrusion Influence of TiBw volume fraction on microstructure and high-temperature properties of in situ TiBw/Ti6Al4V composites with TiBw columnar reinforced structure fabricated by pre-sintering and canned extrusion Homogeneity improvement of friction stir welded ZK61 alloy sheets in microstructure and mechanical properties by multi–pass lowered–temperature rolling Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion Effects of the extrusion temperature on the microstructure and mechanical properties of TiBw/Ti6Al4V composites fabricated by pre-sintering and canned extrusion Room-Temperature and High-Temperature Tensile Mechanical Properties of TA15 Titanium Alloy and TiB Whisker-Reinforced TA15 Matrix Composites Fabricated by Vacuum Hot-Pressing Sintering A Novel Extrusion for Manufacturing TiBw/Ti6Al4V Composite Tubes with a Quasi-Continuous Reinforced Structure Optimization of Rolling Condition for ZK61 Alloy Sheets via Microstructure and Mechanical Property Analysis Effects of heat treatment on the microstructure and mechanical properties of in situ inhomogeneous TiBw/Ti6Al4V composite fabricated by preesintering and canned powder extrusion Effects of heat treatment on the microstructure and mechanical properties of in situ inhomogeneous TiBw/Ti6Al4V composite fabricated by pre–sintering and canned powder extrusion Microstructure and mechanical properties of thin ZK61 magnesium alloy sheets by extrusion and multi–pass rolling with lowered temperature Enhanced ductility in high-strength fine-grained magnesium and magnesium alloy sheets processed via multi-pass rolling with lowered temperature Preparation of TiBw/Ti-6Al-4V composite with an inhomogeneous reinforced structure by a canned hot extrusion process Property improvements in fine–grained Mg–Zn–Zr alloy sheets produced by temperature–step–down multi–pass rolling Evolution of inhomogeneous reinforced structure in TiBw/Ti-6AL-4V composite prepared by pre-sintering and canned β extrusion Influence of large cold strain on the microstructural evolution for a magnesium alloy subjected to multi-pass cold drawing Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression Yield strength behavior for rolled magnesium alloy sheets with texture variation Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis Texture dependence of uniform elongation for a magnesium alloy Fabrication of ZK60 magnesium alloy thin sheets with improved ductility by cold rolling and annealing treatment Microstructure refining and property improvement of ZK60 magnesium alloy by hot rolling Static recrystallization kinetics of a heavily cold drawn AZ31 magnesium alloy under annealing treatment