近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Xu K F, Zhang G H, Han J Z, et al. Application of multigrid for the solution of compressible Reynolds equation of gas foil bearings[J/OL]. Tribology Transactions, 2023.
徐科繁, 张广辉, 韩佳真, 黄钟文, 吉世伟. 层叠式推力箔片轴承静特性仿真及试验研究[J/OL]. 航空动力学报, 2023: 1-9.
Zhang G, Xu KF, Han JZ, et. al. Performance of textured foil journal bearing considering the influence of relative texture depth. Proceedings of the Institution of Mechanical Engineers[J] Part J: Journal of Engineering Tribology, 236(11): 2105-2117, 2022
徐科繁, 冯磊, 张广辉, 刘占生. 考虑滑移效应的织构化气体箔片轴承静特性分析[C]//.第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛论文集(第五册),2022:443-453.
张广辉,黄延忠,陈亚龙,王震林,徐科繁,冯磊.突加不平衡下弹性环挤压油膜阻尼器减振性能实验[J/OL].航空动力学报:1-9[2022-12-03].DOI:10.13224/j.cnki.jasp.20210371.
徐科繁, 张广辉, 黄钟文, 韩佳真, 吉世伟. 考虑滑移边界的多叶波箔式轴承特性分析[J/OL]. 航空动力学报, 2022: 1-10.
徐科繁, 刘喆, 姜海燕, 张广辉. 基于振动和声发射的滚动轴承故障诊断技术[J]. 热能动力工程, 2022, 37(12): 157-164.
张广辉,国阳,王维强,赵御勃,李豫,刘占生.裂纹倾斜角度对呼吸裂纹转子非线性刚度及动力学特性的影响[J].中国电机工程学报,2022,42(17):6368-6379.
徐科繁, 张广辉*, 刘占生, 等. 燃气轮机滚动轴承故障及振动传递特性研究. 热能动力工程, 2021, 36(10): 171-178.
Zhang G, Yu S, Liu Z, et al. The thermo-hydrodynamic analysis of the plain journal bearing with centered circumferential groove: numerical simulation vs. experiment [C]//Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2020, 84218: V10AT25A011.
全列,张广辉. 某双轴燃气轮机动力透平异常振动诊断[J].燃气轮机技术,2020,33(02):54-58.
李亚政,王峥,孙亚非,张广辉*,黄洪雁,刘占生. 基于损伤力学和XFEM的舰船蒸汽轮机叶片裂纹扩展研究[J]. 船舶力学,2018,22(04):490-498.
Yan J, Zhang G, Liu Z, et al. Performance of a novel foil journal bearing with surface micro-grooved top foil[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2018, 232(9): 1126-1139.
Yao C, Zhang G, Liu Z. Forced shock oscillation control in supersonic intake using fluid–structure interaction[J]. AIAA Journal, 2017, 55(8): 2580-2596.
Wang Z, Zhang G*, Wen J, et al. Numerical modeling of the flow in the squeeze film dampers with oil feed groove by computational fluid dynamic analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2017, 231(6): 693-707.
张敏,张广辉*,刘占生. 大型船舶推进轴系校中多点非线性弹性支承模型研究[J]. 船舶力学,2016,20(Z1):176-183.
姚程,张广辉,刘占生. 背压脉动引起的超声速进气道流固耦合振动分析[J]. 推进技术,2016,37(08):1447-1454.
徐方程,张广辉,孙毅,刘占生,张雯. 平箔片楔形高度对气体止推箔片轴承特性影响[J]. 航空动力学报,2016,31(12):3064-3072.
Zhang G, Ehmann K F. Dynamic design methodology of high speed micro-spindles for micro/meso-scale machine tools[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(1-4): 229-246.
Zhang G, Liu S, Ma R, et al. Nonlinear dynamic characteristics of journal bearing–rotor system considering the pitching and rolling motion for marine turbo machinery[J]. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2015, 229(1): 95-107.
Yan J, Zhang G, Liu Z, et al. Static characteristics of gas foil thrust bearing based on gas rarefaction model[C]//Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2015, 56765: V07AT31A009.
Ma R, Zhang G, Liu Z, et al. Numerical study on flow characteristics and flow induced noise of flexible NACA0018 airfoil [C]//Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2015, 56628: V001T22A004.
姚程,张广辉,刘占生. 跨声速扩压器弹性壁板流固耦合振动研究[J]. 推进技术,2015,36(06):912-919.
Zhang G, Liu Z, Kang W, et al. Nonlinear dynamic characteristics of rotating ramjet rotor supported by hybrid gas bearing[J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2014, 228(1): 115-136.
Zhang G, Liang X, Wang Y, et al. Performance analysis of oil lubricated foil bearing with flexible supported back spring structure - part I: model development and numerical investigation[J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(11).
Zhang G, Liang X, Wang Y, et al. Performance analysis of oil lubricated foil bearing with flexible supported back spring structure - part II: comparison of predictions and measured test data[J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(11).
Xu F, Zhang G, Sun Y, et al. The effect of Coulomb friction in foil structure on the static and dynamic performance of bump foil journal bearings[C]//Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2014, 45776: V07BT32A001.
Zhang G, Liu S, Cao Z, et al. Analytical model of self-acting journal bearing subjected to base excitation for marine engine system[J]. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2013, 227(2): 194-207.
Hu L, Zhang G, Liu Z, et al. Performance analysis of multi-leaf oil lubricated foil bearing[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013, 227(9): 962-979.
Zhang G, Wang G, Liu Z, et al. Stability characteristics of steam turbine rotor seal system with analytical floating ring seal force model[C]//Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2013, 55270: V07BT30A004.
张广辉*,胡丽国,解亮,刘占生,马瑞贤. 弹簧支撑多叶油润滑箔片轴承动态特性研究[J].振动工程学报,2013,26(06):807-814.
胡丽国,张广辉,解亮,刘占生,闫佳佳,徐方程. 油润滑弹性支撑多叶箔片轴承静态特性[J]. 航空动力学报,2013,28(08):1876-1884.
Zhang G, Sun Y, Liu Z, et al. Dynamic characteristics of self-acting gas bearing–flexible rotor coupling system based on the forecasting orbit method[J]. Nonlinear Dynamics, 2012, 69(1): 341-355.
Zhang G, Y Sun, Liu Z, et al. Application of a forecasting coupling method to the non-linear dynamic analysis of a flexible rotor supported by externally pressurized orifices hybrid gas bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011, 225(8): 704-717.
Zhang G, Liu Z, Wang G, et al. Analytical forces parameters identification of hybrid journal gas bearing based on transfer function[C]//Turbo Expo: Power for Land, Sea, and Air. 2011, 54662: 523-535.
张广辉,刘占生. 薄膜节流器动静混合径向气体轴承性能[J]. 机械工程学报,2011,47(03):73-80.
Zhang G, Liu Z, Wang X, et al. Experimental study of tilting pad journal bearing—rotor system with acoustic emission technique[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010, 224(1): 115-122.
张广辉,刘占生. 径向气体轴承-柔性转子耦合系统动力学研究[J].航空动力学报,2010,25(06):1417-1426.
张广辉,刘占生,田新. 旋转冲压转子-动静混合气体轴承系统振动特性仿真研究[J]. 振动与冲击,2010,29(09):155-160+249.
张广辉,刘占生,张金锋,姚程. 基于传递函数法的动静混合径向气体轴承动特性解析研究[A]. 中国振动工程学会转子动力学专业委员会. 第9届全国转子动力学学术讨论会ROTDYN 2010论文集[C]. 中国振动工程学会转子动力学专业委员会:中国振动工程学会,2010:4.
Liu Z S, Zhang G H*, Xu H J. Performance analysis of rotating externally pressurized air bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009, 223(4): 653-663.
张广辉,刘占生,章正传. 旋转冲压发动机高速动静压混合气体轴承转子动力学特性试验研究[J]. 振动与冲击,2009,28(09):74-78+215.
张广辉,刘占生. 旋转冲压发动机高速动静混合气体轴承性能分析[J]. 推进技术,2009,30(05):610-617.
Zhang G, Liu Z, Yoo H. In-plane vibration analysis of cantilevered circular arc beams undergoing rotational motion[J]. Journal of mechanical science and technology, 2008, 22(1): 113-119.