近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Y.F. Jia1, R. Fu1, C. Ling, L. Zheng*, Z. Zhong*, Y.S. Hong. “Fatigue life prediction based on a deep learning method for Ti-6Al-4V fabricated by laser powder bed fusion up to very-high-cycle fatigue regime”, International Journal of Fatigue, Vol. 172, 107645 (2023).
R. Fu1, L. Zheng1, Z. Zhong*, Y.S. Hong*. “High-cycle and very-high-cycle fatigue behavior at two stress ratios of Ti-6Al-4V manufactured via laser powder bed fusion with different surface states”, Fatigue & Fracture of Engineering Materials and Structures, Vol. 46, 2348-2363 (2023).
B.L. Wang*, J.S. Hu, L. Zheng*. “Nonlocal model of electromechanical fields and effective properties of piezoelectric materials with rigid and electrically conductive inclusions,” Mechanics of Materials, Vol. 176, 104415 (2022).
R. Fu1, L. Zheng1, C. Ling, Z. Zhong*, Y.S. Hong*. “An experimental investigation of fatigue performance and crack initiation characteristics for an SLMed Ti-6Al-4V under different stress ratios up to very-high-cycle regime”, International Journal of Fatigue, Vol. 164, 107119 (2022).
L.M. Du, X.N. Pan, G.A. Qian, L. Zheng*, Y.S. Hong*. “Crack initiation mechanisms under two stress ratios up to very-high-cycle fatigue regime for a selective laser melted Ti-6Al-4V,” International Journal of Fatigue, Vol. 149, 106294 (2021).
L.M. Du, G.A. Qian, L. Zheng*, Y.S. Hong*. “Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V”, Fatigue & Fracture of Engineering Materials and Structures, Vol. 44, Issue 1, 240-256 (2021).
Z. Li, B.L. Wang*, K.F. Wang, L. Zheng*. “Improving thermomechanical properties of cracked brittle honeycombs by negative Poisson’s ratio effect,” Composite Structures, Vol.266, 113825 (2021).
Z.X. Wu, B.L. Wang*, S.H. Hou, L. Zheng*. “Degeneration of power output of a flexible and wearable thermoelectric module under bending fatigue,” Mechanics of Materials, Vol. 161, 104027 (2021).
K.F. Wang, B.L. Wang*, L. Zheng*, Y. Zhang and C.W. Zhang, “Bending behavior and its effect on switching performance of an all-optical switch,” Journal of Physics D: Applied Physics, Vol.54, No.15, 155108 (2021).
L. Du, G. Qian, L. Zheng*, Youshi Hong*, “Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V,” Fatigue & Fracture of Engineering Materials and Structures, Vol. 44, Issue 1, 240-256 (2021).
Y. Chang, X. Pan, L. Zheng*, Y. Hong*, “Microstructure refinement and grain size distribution in crack initiation region of very-high-cycle fatigue regime for high-strength alloys,” International Journal of Fatigue, Vol. 134, 105473, (2020).
Y.J. Cui, K.F. Wang*, L. Zheng*, B.L. Wang, C.W. Zhang, “Theoretical model of fatigue crack growth of a thermoelectric pn-junction bonded to an elastic substrate,” Mechanics of Materials, Vol. 151, 103623, (2020).
K. F. Wang*, Y. Q. Wang, B. L. Wang, and L. Zheng*, “A double cantilever beam incorporating cohesive crack modeling for superconductors,” Modern Physics Letters B, Vol. 34, No. 15, 2050166 (2020).
Y. Q. Wang, K. F.Wang*, B. L. Wang, L. Zheng*,·C. W. Zhang, “Fracture analysis of superconducting composites with a sandwich structure based on electromagnetic-thermal coupled model,” Acta Mechanica, Vol.230, No.12, 4435-4451 (2019).
Y.J. Cui, B.L. Wang*, K.F. Wang, L. Zheng*. “Power output evaluation of a porous annular thermoelectric generator for waste heat harvesting”, International Journal of Heat and Mass Transfer, Vol.137, 979–989 (2019).
Y.Q. Wang, B.L. Wang, K.F. Wang*, L. Zheng*, “Effect of temperature-dependent critical current density on the fracture behavior for a rectangular superconducting slab with a center crack,” Physica C: Superconductivity and its applications, Vol. 556, p.36-42 (2019).
Z. Li, B.L. Wang*, K.F. Wang, L. Zheng*, “A multi-scale model for predicting the thermal shock resistance of porous ceramics with temperature-dependent material properties,” Journal of the European Ceramic Society, Vol. 39, p.2720-2730 (2019).
Y.J. Cui, K.F. Wang, B.L. Wang*, and L. Zheng*. “Effect of buckling on the cooling performance of free-standing planar thermoelectric coolers”, Journal of Thermal Stresses, Vol.42, No.8, 962–975 (2019).
Y. Chang, L. Zheng, X. Pan, Y. Hong*, “Further investigation on microstructure refinement of internal crack initiation region in VHCF regime of high-strength steels,” Frattura ed Integrità Strutturale, Vol. 49, 1-11 (2019).
L. Zheng* and Y. Chen, “Investigation of Photothermal Effects on the Liquid Field during the Exposure Process in Immersion Lithography,” IOP Conf. Series: Journal of Physics: Conf. Series 1213, 052109 (2019).
L. Zheng* and Y. Chen, “Analysis of Flowing in the Immersion Fluid Field under the Oscillatory Motion of the Silicon Wafer,” IOP Conf. Series: Journal of Physics: Conf. Series 1213, 052108 (2019).
L. Zheng* and Y. Chen, “Effects of Structural Parameters on Liquid Flowing in Immersion Lithography,” Proceedings of 2019 International Conference on Information Technology, Electrical and Electronic Engineering (ITEEE 2019), Vol. 3, p.548-554 (2019).
Y. Zhang, Y. Chu, W. Xing, L. Zheng & Y. Cao*, “Mechanical properties of thermoelectric Mg2Si using molecular dynamics simulations,” Mechanics of Advanced Materials and Structures, Vol. 26, No. 8, 710-715 (2019).
H. Liu, Y. Cao*, Q. Chen, M. Kong, L. Zheng, “A conserved discrete unified gas kinetic scheme for microchannel gas flows in all flow regimes,” Computers and Fluids, Vol. 167, 313-323 (2018).
C. Lu, T. Zhang, P. Qiu, J. Chen, Y.g Cao, and L. Zheng, “Barrel Erosion of Ion Thruster Accelerator Grid Under Different Operating Conditions,” IEEE Transactions on Plasma Science, v.46, n.12, 4065-4077 (2018).
H. Cao, Q. Li, K. Shan, Y. Cao*, and L. Zheng, “Effect of Preionization on the Erosion of the Discharge Channel Wall in a Hall Thruster Using a Kinetic Simulation,” IEEE Transactions on Plasma Science, Vol. 43, No. 1, 130-140 (2015).
L. Zheng* and J. Ye, “Analysis of the Lateral Stability for Four-wheel Independent Driving Electric Vehicles,” Applied Mechanics and Materials, Vol. 590, pp. 394-398 (2014).
L. Zheng* and J. Zhang, “Analysis and applications of the regenerative braking force in pure electric vehicles,” International Journal of Electric and Hybrid Vehicles, Vol. 4, No. 1, pp 12-23 (2012).
L. Zheng*, B. Wu, and G.-Q. Xu, “Investigation of the Temperature Distribution in the Lithium-ion Battery for Pure Electric Vehicles,” Applied Mechanics and Materials, Vol.187, pp 324-328, 2012.
L. Zheng, “Investigation and Prediction of Image Placement Errors in Extreme Ultraviolet Lithography Masks,” Proceedings of SPIE - The International Society for Optical Engineering, Vol. 7848, 78483H 1-11 (2010).
L. Zheng, “Investigation and Prediction of Image Placement Errors in Extreme Ultraviolet Lithography Masks,” Proceedings of SPIE - The International Society for Optical Engineering, Vol. 7848, 78483G 1-8 (2010).
P.-P. Peng and L. Zheng*, “Simulation and Analysis of Passive Wireless TPMS Digital Down Converter Based on System Generator”, Proceedings of the International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2010), pp. 350-353, 2010.
X.-J. Wen and L. Zheng*, “Simulation and Analysis of Series Hybrid Electric Vehicle (SHEV) based on ADVISOR”, Proceedings of the International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2010), pp. 354-357, 2010.
T.-L. Li, Z.-B. Wu, H. Hu and L. Zheng, “Pressure and temperature microsensor based on surface acoustic wave,” Electronics Letters, pp. 125-128, (2009).
T.-L. Li, L. Zheng*, and H. Hong, “A Novel Wireless Passive SAW Sensor Based on the Delay Line Theory,” Proceedings of 3rd IEEE International Conference of Nano/Micro Engineered and Molecular Systems, pp. 467-470, (2008).
L. Zheng, R. Engelstad, and E. Lovell, “Investigation of Overlay Errors due to the Interaction of Optical and EUV Lithography Mask Fabrication Processes,” Journal of Vacuum Science and Technology B, Vol. 23(6), pp. 3043-3046, (2005).
A. Abdo, L. Zheng, A. Wei, A. Mikkelson, G. Nellis, R. Engelstad and E. Lovell, “Simulating Fabrication and Imprinting Distortions in Step-and-Flash Imprint Lithography (S-FIL) Templates,” Journal of Microelectronic Engineering, Vol. 73-74, pp. 161-166 (2004).
L. Zheng, A. Mikkelson, A. Abdo, R. Engelstad, E. Lovell, and T. White, “Optimization of EUVL Reticle Thickness for Image Placement Accuracy,” Proceedings of SPIE 23rd Annual BACUS Symposium on Photomask Technology, Vol. 5256, pp. 573-584 (2003).
会议论文及发表演说
“A Novel Wireless Passive SAW Sensor Based on the Delay Line Theory,” T.-L. Li, L. Zheng, and H. Hong, presented at the 3rd IEEE International Conference of Nano/Micro Engineered and Molecular Systems, Sanya, China, Jan. 7th, 2008.
“Study on a Novel SAW Sensor in TPMS Based on the P-Matrix Model,”L. Zheng, T. Liu, and T. Li, presented at the 3rd IEEE International Conference of Nano/Micro Engineered and Molecular Systems, Sanya, China, Jan. 8th, 2008.
“Investigation of Overlay Errors due to the Interaction of Optical and EUV Lithography Mask Fabrication Processes,”L. Zheng, R. Engelstad, and E. Lovell, presented at 49th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, Orlando, FL, June 3rd, 2005.
“Optimization of EUVL Reticle Thickness for Image Placement Accuracy,”L. Zheng, A. Mikkelson, A. Abdo, R. Engelstad, and E. Lovell, presented at 23rd Annual BACUS Symposium on Photomask Technology, Monterey, CA, Sept. 11th, 2003.
“Simulating Fabrication Distortions in Step-and-Flash Imprint Lithography Templates,” L. Zheng, A. Abdo, R. Engelstad, G. Nellis, and E. Lovell, presented at 2nd International Conference on Nanoimprint and Nanoprint Technology in Boston, MA, Dec. 3-5, 2003.
“Overlay Improvement Using a Deformable Mask Holder,” L. Zheng, A. Mikkelson, C. Chen, L. Harriott, M. Smith, E. Lovell, and R. Engelstad, presented at 23rd Annual BACUS Symposium on Photomask Technology, Monterey, CA, Sept. 8-12, 2003.
京公网安备 11010802027423号