Esteban Pedro Busso - 哈尔滨工业大学（深圳）

个人简介

BUSSO院士长期致力于固体力学及材料科学领域的研究，主要研究方法包括建立材料微观结构变形和损伤与宏观行为的联系，开发基于物理机理的模型和计算工具，重点研究领域包括材料高温力学行为、微观/介观/宏观跨尺度关联，以及动力学-变形耦合等；现任英国材料、矿物和采矿学会会士，英国皇家工程院航空航天小组成员，法国材料学会会士等职务，担任或曾担任《Int. Journal of Plasticity》等6个学术期刊副主编或编委；在JMPS、IJP、Acta Materialia等期刊发表学术论文150余篇，参与撰写并出版学术专著12本；于2014年当选为英国皇家工程院院士。教育经历 1985.08-1990.07 麻省理工学院，机械工程博士 1985.08-1987.04 麻省理工学院，机械工程硕士 1975.02-1980.12 国立科尔多瓦大学，机械电子工程学士、硕士研究与工作经历 2018.06至今哈尔滨工业大学，理学院，首席学术顾问（至2019.03）、教授 2013.11-2018.05 ONERA-法国宇航院，科研总监 2005.10-2013.10 巴黎高等矿业学院材料力学中心，主任、教授 1994.09-2005.09 伦敦帝国理工学院，机械工程系，助理教授、副教授、教授

研究领域

材料细观力学计算固体力学晶体塑性理论多尺度及多物理场计算

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

期刊论文 Busso, E. P. and McClintock, F.A., "Stress strain Histories in Coatings on Single Crystal Specimens of a Turbine Blade Alloy", Int. Journal Solids and Structures, V. 24, (1988), 1113 1130. Busso, E.P., Liu, Y. P., McClintock, F. A. and Allen, S. M., "Stable Configurations of Dislocations in Homogenized Nickel Aluminide Single Crystals ". Philosophical Magazine A, V. 66, (1992), 1065-1080. Busso, E. P., Kitano, M. and Kumazawa, T., "A Visco Plastic Constitutive Model for 60/40 Tin Lead Solder Used in IC Package Joints ". Journal Eng. Materials and Technology, V. 114, (1992), 331-337. Busso, E. P. and McClintock, F.A., "Thermal Fatigue Degradation of a NiCoCrAlY Overlay Coating". Material Science and Engineering A, V. 161, (1993), 165-179 Busso, E. P. and McClintock, F.A., "Mechanisms of Cyclic Deformation of NiAl Single Crystals". Acta Metallurgica et Mat., V. 42, (1994), 3263-3275. Busso, E. P., Kitano, M. and Kumazawa, T., "A Forward Gradient Time Integration Procedure for an Internal Variable Constitutive Model of Sn Pb Solder". Int. J. Numerical Methods Eng., V. 37, (1994), 539-558. Busso, E. P., Kitano, M. and Kumazawa, T., "Modelling Complex Inelastic Deformation processes in IC Packages' Solder Joints ". Journal of Electronic Packaging, V. 116, (1994), 6-15. Linkens, D., Busso, E.P. and Dean, D.W., "Prediction of Non-steady Asymptotic Crack Tip Fields in Power Law Creeping Materials ". Nuclear Engineering and Design, V. 158, (1995), 377-385. Busso, E.P., Linkens, D., and Dean, D.W, "On the Effects of Loading Conditions and Geometry on Time Dependent Singular Crack Tip Fields ". Engineering Fracture Mechanics, V. 50, (1995), 231-247. Busso, E. P. and McClintock, F.A.,"A Dislocation Mechanics-Based Crystallographic Model of a B2-Type Intermetallic Alloy ". International Journal of Plasticity, V. 12, (1996), 1-28. Lei, Y., O’Dowd, N.P., Busso, E.P., and Webster, G., ‘’Weibull Stress Solutions for 2-D Cracks in Elastic and Elastic-Plastic Materials ’’. International Journal of Fracture, V. 89, (1998), 245-268. Busso, E.P., “A Continuum Theory for Dynamic Recrystallization with Microstructure-Related Length Scales ’’. International Journal of Plasticity, V. 14, N. 4-5, (1998), 355-372. Busso, E.P., Meissonnier, F., O’Dowd, N.P. and Nouailhas, D., “Length Scale Effects on the Geometric Softening of Precipitated Single Crystals ’’, Journal de Physique IV , V. 8, (1998), 55-61. Busso, E.P., Lei, Y., O’Dowd, N.P. and Webster, G., “Mechanistic Prediction of Fracture Processes in Ferritic Steel Welds Within the Transition Temperature Regime’’. Journal of Eng. Materials and Technology, V.120, N. 4, (1998), 328-337. Chen, J., Crisfield, M., Kinloch, Busso, E.P., A.J., Matthews, F.L., and Qiu, Y., “Predicting Progressive Delamination of Composite Material Specimens via Interface Elements”, Journal of Mechanics of Composite Materials and Structures, V. 6, (1999), 301-317. Busso, E.P., “Oxidation Induced Stresses in Ceramic-Metal Interfaces”, Journal de Physique IV V. 9, (1999), 287-296. Busso, E.P., Meissonnier, F., and O’Dowd, N.P., “Gradient-Dependent Visco-Plastic Deformation of Two-Phase Single Crystals’’. Journal of the Mechanics and Physics of Solids, V. 48, Issue 11 (2000), 2333-2361. O’Dowd, N.P., Lei, Y. and Busso, E.P., “Prediction of Cleavage Failure Probabilities Using the Weibull Stress”, Engineering Fracture Mechanics, V. 67 (2000), pp. 87-100. Yan, W., Busso, E.P., and O’Dowd, N.P. “A Micromechanics Investigation of Sliding Wear in Coated Components’’. Proc. Royal Soc. London A , V. 456, (2000), 2387-2407 Meissonnier, F., Busso, E.P., and O’Dowd, N.P., “Finite Element Implementation of a Generalised Non-Local Rate-Dependent Crystallographic Formulation for Finite Strains’’. International Journal of Plasticity, V. 17, Issue 4, (2001), 601-640. Tunvisut, K., N.P. O’Dowd and Busso, E.P., “Use of Scaling Functions to Determine the Mechanical Properties of Thin Coatings from Microindentation Tests’’. Int. J. Solids and Structures, V. 38, (2001), 335-351. Busso, E.P., Lin, J., Sakurai, S, and Nakayama, M. “A Mechanistic Study of Oxidation-Induced Degradation in a Plasma-Sprayed Thermal Barrier Coating System. Part I: Model Formulation’’. Acta Materialia, V. 49/9, (2001), 1515-1528. Busso, E.P., Lin, J. and Sakurai, S., "A Mechanistic Study of Oxidation-Induced Degradation in a Plasma-Sprayed Thermal Barrier Coating System. Part II: Life Prediction Model''. Acta Materialia, V. 49/9 (2001), 1529-1536. Busso, E.P., Tkach, Y.V., and Travis, R.P., “Thermally Induced Failure of Multi-Layer Ceramic Structures”. Philosophical Magazine A, V. 81, No. 8, (2001), 1979-1995. Yan, W., Busso, E.P., and O’Dowd, N.P. “A Generalised Sliding Wear Model for Inhomogeneous Coatings’’. Journal de Physique IV, V. 11, (2001), 257-266. Busso, E.P. and Cheong, K. S., “Length Scale Effects on the Macroscopic Behaviour of Single and Polycrystalline FCC Materials’’. Journal de Physique IV, V. 11 (2001), 161-170. Yan, W., O’Dowd, N.P. and Busso, E.P., “Numerical Study of Sliding Wear: Simulation of the Pin-on-Disc Test’’. Journal of the Mechanics and Physics of Solids, V. 50, Issue 3 (2002), 449-470. Pitakthapanaphong, S. and Busso, E.P., “Self-Consistent Elastoplastic Stress Solutions for Functionally Gradient Material Systems Subjected to Thermal Transients’’. Journal of the Mechanics and Physics of Solids, V50, No. 4 (2002), 695-716. Tunvisut, K., Busso, E.P., O’Dowd, N.P and Bratner, H.P. “Determination of the Mechanical Properties of Metallic Films and Substrates from Indentation Tests’’, Philosophical Magazine A. V. 82, No.10, (2002) 2013-2029. Busso, E.P. and Cailletaud, G, “On the Theoretical Implementation of Non-Smooth Domains. Part I: Rate-dependent Formulations”, Journal de Physique IV. V. 105 (2003), 255-262. Dumoulin, S., Busso, E.P., O'Dowd, N.P. and Allen, D., “A Multiscale Approach for Coupled Phenomena in Multiphase FCC Materials at High Temperatures”. Philosophical Magazine. V. 83, No. 31-34 (2003), 3895-3916. Ghoniem, N.M., Busso, E.P., Huang, H., and Kioussis, N., “Multiscale Modeling of Nano- and Micro-Mechanics: an Overview”. Philosophical Magazine, V. 83, No. 31-34 (2003), 3475-3528. Gamonpilas, C. and Busso, E.P., “On the Effect of Substrate Properties on the Indentation Behaviour and Hardness Measurements of Coated Systems”. Material Science and Engineering A, V. 380 (2004), 52–61. Cheong, K.S. and Busso, E.P., “Discrete Dislocation Density Modelling of Single Crystal FCC Polycrystals”. Acta Materialia. V. 52 (2004), 5665–5675. Yaguchi, M. and Busso, E.P., “A Self-Consistent Constitutive Formulation for a Directionally Solidified Polycrystal”. International Journal of Solids and Structures. V. 42/3-4 (2004), 1073-1089. Cheong, K.S., Busso, E.P. and Arsenlis, A., “A study of microstructural length scale effects on the behaviour of FCC polycrystals using strain gradient concepts”. International Journal of Plasticity. V. 21/9 (2005), 1797-1814. Pitakthapanaphong, S and Busso, E.P., ？Finite Element Analysis of the Fracture Behaviour of Multi-Layered Systems Used in Solid Oxide Fuel Cell Applications？, Modelling and Simulation in Materials Science and Engineering, V. 13 (2005), 531-540. Busso, E.P. and Cailletaud, G., “On the Selection of Active Slip Systems in Crystal Plasticity”. International Journal of Plasticity. V. 21 (2005), 2212–2231. Zhao, LG, O'Dowd, N.P and Busso, E.P., “A Coupled Approach to the Study of High Temperature Crack Initiation in Single Crystal Ni-base Superalloys”. Journal of the Mechanics and Physics of Solids. V. 54 (2006) 288–309. Busso, E.P., Qian, Z.Q., “A Mechanistic Study of Microcracking in Transversely Isotropic Ceramic-Metal Systems’’, Acta Materialia, V. 52 (2006), 325-338. Cheong, K.S. and Busso, E.P., “Effects of Lattice Misorientations on Strain Heterogeneities in FCC Polycrystals’’, Journal of the Mechanics and Physics of Solids. V. 54 (2006), pp. 671-689. Busso, E.P., O'Dowd, N.P. and Nikbin, K., “Mechanistic Studies of High Temperature Crack Initiation in Single Crystal Materials”, Journal of ASTM International, V. 3, No. 7, Paper JAI13219 (2006), pp. 1-12. Taylor, M.P., Evans, H.E., Busso, E.P. and Qian, E.P., “Creep Properties of Pt-Aluminide Coatings “.Acta Materialia. 54 (2006), 3241. Iwamoto, T, Cherkaoui, M, and Busso, E.P. , “A Numerical Investigation of Interface Dynamics During Martensitic Transformation in a Shape Memory Alloy Using the Level-set Method”, Key Engineering Materials, V. 340-341 (2007) pp. 1199-1204. Busso, E.P., Wright, L., McCartney, L.N., Saunders, S.R., Osgerby, S. and Nunn, J., “A Physics-Based Life Prediction Methodology for Thermal Barrier Coating Systems”. Acta Materialia, V. 55 (2007), pp. 1491-1503. Gamonpilas, C. and Busso, E.P., “Characterization of Elastoplastic Properties Based on Inverse Analysis and Finite Element Modeling of Two Separate Indenters”, J. Engng. Mat. and Technology, V. 129, Issue 4 (2007), pp. 603-608. Zhao, LG, O'Dowd, N.P and Busso, E.P., “Computational Modelling of Crack Initiation in a Single Crystal Superalloy under Fatigue-Oxidation Conditions”. Mat. Science and Technology, V. 23, N. 12 (2007), pp. 1433-1438. Busso EP, Evans HE, Wright L, McCartney LN, Nunn J, Osgerby S, “A software tool for lifetime prediction of thermal barrier coating systems”, Mater. Corrosion, V. 59(7) (2008), pp. 556-565. Iwamoto, T, Cherkaoui, M, and Busso, E.P. , “A finite element based level-set method of an interface motion driven by a diffusion field : application to a phase transformation problem”, Computational Materials Science, V. 44, (2008), pp. 792-801. Iwamoto, T., Cherkaoui, C., Busso, E.P., Sawa, T., and Murakami, E., “A Finite Element Simulation of Interface Motion Driven by Diffusion Field in Solid Materials Based on the Level-set Method”, Transactions of the Japan Society for Mechanical Engineers Series A, Vol. 74, No. 945, (2008), pp. 1191 - 1197. Busso, E.P., Qian, ZQ.,Taylor, M.P., and Evans, H.E., “The Influence of Bondcoat and Topcoat Mechanical properties on Stress Development in Thermal Barrier Coating Systems “. Acta Materialia, 57 (2009), pp. 2349-2361. Gamonpilas, C. and Busso, E.P., “A Mechanistic Approach to Extract the Mechanical Properties of Individual Constituents in Plasma-sprayed Metal Matrix Composites Coatings”, Surface and coatings technology, V. 204, (2009), pp. 440-447. Busso, E.P., Evans, H.E, Qian, ZQ., and Taylor, M.P., “Effect of Breakaway Oxidation on Local Stresses in Thermal Barrier Coatings”. Acta Materialia, 57(8) (2009). Saillard, A. Cherkaoui, M., Capolungo, L, and Busso, E.P., “Stress Influence on High Temperature Oxide Scale Growth: Modeling and Investigation on a Thermal Barrier Coating System”, Philosophical Magazine, 90 (2010), pp. 2651-2676. Cordero, N.M., Gaubert, A., Forest, S., Busso, E.P., Gallerneau, F. and Kruch, S. “Size effects in generalised continuum crystal plasticity for two-phase laminates”, Journal of the Mechanics and Physics of Solids, 58 (2010) 1963–1994. Forest, S., Cordero, N.M. and Busso, E.P., “First vs. Second Gradient of Strain Theory for Capillarity Effects in an Elastic Fluid at Small Length Scales”, Computational Materials Science, 50 (2011), pp. 1299–1304. Cordero, N.M., Forest, S., Busso, E.P., Berbenni, S., and Cherkaoui, M., “Grain Size Effects on Plastic Strain and Dislocation Density Tensor Fields in Metal Polycrystals”, Computational Materials Science, 52 (2012), pp. 7-13. Pouillier, E., Gourgues, A.F., Tanguy, D. and Busso, E.P., “A Study of Intergranular Fracture in an Aluminium Alloy Due to Hydrogen Embrittlement”, International Journal of Plasticity, 34 (2012), pp. 139-153. Cordero, N.M., Forest, S., and Busso, E.P., “Generalised continuum modelling of grain size effects in polycrystals”. Comptes Rendus Mécanique, 340 (2012), pp. 261-264. Abrivard, G., Busso, E.P., Forest, S., and Appolaire, B., “Phase Field Modelling of Grain Boundary Motion Driven by Curvature and Stored Energy Gradient. Part I – Theory and Numerical Implementation”, Philosophical Magazine, V. 92, Issue 28-30 (2012), pp. 3618-3642. Abrivard, G., Busso, E.P., Forest, S., and Appolaire, B., “Phase Field Modelling of Grain Boundary Motion Driven by Curvature and Stored Energy Gradient. Part II – Application to Thermal Recrystalisation”, Philosophical Magazine, V. 92, Issue 28-30 (2012), pp. 3643-3664. Cordero, N.M., Forest, S., and Busso, E.P., “Micromorphic Modelling of Grain Size Effects in Metal Polycrystals”, Gamm-Mitteilungen (Gesellschaft fur Angewandte Mathematik und Mechanik), 36, No. 2 (2013), pp. 186-202. Maurel, V., Busso, E.P., Frachon, J., Besson, J., and N’Guyen, F., “A Methodology to Model the Complex Morphology of Rough Interfaces”. International Journal of Solids and Structures, Vol. 51 (2014), 3293-3490. Geers, M.G.D., Cottura, M., Appolaire, B., Busso, E.P., Forest, S., and Villani, V., “Coupled Glide-Climb Crystal Plasticity”. Journal of the Mechanics and Physics of Solids, Vol. 70 (2014), 136-153. Villani, A., Busso, E.P., Ammar, K., Forest, S. and Geers, M.G.D, “A Fully Coupled Diffusional-Mechanical Formulation: Numerical Implementation, Analytical Validation and Effects of Plasticity on Equilibrium“. Archive of Applied Mechanics, Vol. 84 (2014), 1647–1664. Villani, A., Busso, E.P., and Forest, S., “Field Theory and Diffusion Creep Predictions in Pollycrystalline Aggregates“. Modelling and Simulations in Materials Science and Engineering, V. 23, Issue 5 (2015). 055006 (24pp). Busso, E.P., “On the Deformation Heterogeneities Described by Crystal Plasticity”, The Aerospace Lab Journal, Issue 9, June (2015), 1-13. Pommier, H., Busso, E.P., Morgeneyer, T.F. and Pineau, A. “Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: effect of carbon, nitrogen and phosphorus contents. Acta Materialia. Vol. 103 (2016), 893-908. Pineau, A., McDowell, D.L., Busso, E.P. and Antolovich, S., “Failure of Metals II: Fatigue”, invited Overview Paper, Acta Materialia, V. 117 (2016), 484-507. Kaminski, M., Kanouté, P., Kruch, S. Busso, E.P. and Chaboche, J-L. “A high temperature fatigue damage model for single crystal superalloys”, Materials at High Temperatures, Vol. 33, Issue 4-5, (2016), 412-424. Cordero, N.M., Forest, S., and Busso, E.P., “Second Strain Gradient Elasticity of Nano-Objects”, Journal of the Mechanics and Physics of Solids, Vol. 97 (2016), 92–124. Busso, E.P., Boivin, D, Leveque, D. “On recent advances in microstructural characterisation and in-situ testing techniques to study material behaviour”, The Aerospace Lab Journal, Issue 12-02 (2016), 1-13. Pommier, H., Busso, E.P., Morgeneyer, T.F. and Pineau, A., “Local approach to stress relaxation cracking in a AISI 316L-type austenitic stainless steel”, Eng. Fracture Mechanics, Vol. 183 (2017), 170-179. Zhang, M., Gourgues-Lorenzon, A-F., Busso, E.P., Huang, M. and Luo, H., “Recrystallisation-assisted Creep of an Austenitic Fe-Ni Alloy under Low Stresses after Hot Deformation”. Acta Materialia, Vol. 153 (2018), pp. 23-34. Pommier, H., Busso, E.P. and Morgeneyer, T.F. “A viscoplastic constitutive model containing microstructure-related length scales: application to the prediction of residual stress fields in an austenitic stainless steel”. Int. Journal of Plasticity (2019). Under review. 论著 Cammarata, R., Nastasi, M., Busso, E.P., and Oliver, W.C., (eds.) Thin Films: Stresses and Mechanical Properties VII, (Materials Research Society Symp. Series, Warrandale, PA, USA), V. 505, 1997. Busso, E.P. and Cailletaud, G. (eds.), Mechanisms and Multi-Physics Processes in Solids: Experiments, Modelling and Applications, (EDP Sciences, Paris), 1999. Busso, E.P., Dunne, F. and Cailletaud, G., (eds.) Micro-Macro Links in Advanced Constitutive Formulations. Special issue of the Int. J. of Plasticity, (Pergamon Press), V. 17, Issue 4, (2001). Ghoniem, N.M., Busso, E.P. and Huang, H. (eds.), Nano and Micromechanics of Materials. Special issue of Philosophical Magazine, (Taylor and Francis, publ.), V. 83, Nov-Dec. 2003. Busso, E.P., Lagoudas, D. and Steinmann, P. (eds.), Recent Advances in Theoretical Mechanics. Special issue of Philosophical Magazine, (Taylor and Francis, publ.). January 2006. Mulhaus, H., Busso, E.P., Benallal, A, Sluys, B. and Suiker, A. (eds), Instabilities Across the Scales I. Special issue of Philosophical Magazine, (Taylor and Francis, publ.). V. 86, Numbers 21-22, August 2006. El-Azab, A., Zaiser, M. And Busso, E.P. (eds.), Density-Based Modeling of Dislocation. Special issue of Philosophical Magazine, (Taylor and Francis, publ.). V. 87, Numbers 8-9, March 2007. Suiker, A., Sluys, L.J., Busso, E.P., Benallal, A, and Mulhaus, H. (eds), Instabilities Across the Scales II: Part 2. Special issue of Philosophical Magazine, (Taylor and Francis, publ.). V. 88, Numbers 28-29, October 2008. Geers, M. and Busso, E.P., (eds), Multiscale Plasticity of Crystalline Materials, Special issue of Philosophical Magazine (Taylor and Francis, publ.). V. 88, Numbers 30-32, October 2008. Mulhaus, H., Busso, E.P., Suiker, A., and Sluys, L.J., (eds), Instabilities Across the Scales III:. Special issue of Philosophical Magazine, (Taylor and Francis, publ.). V. 92, Issue 28-30, September 2012. Busso, E.P., Mulhaus, Suiker, A., and Sluys, L.J., (eds), Instabilities Across the Scales IV:. Special issue of Philosophical Magazine, (Taylor and Francis, publ.). V. 95, Issue 28-30, Oct. 2015. Busso, E.P. and Kruch, S. (eds.), Life Prediction Methods for Materials and Structures, Special Issue of The Aerospace Lab Journal, Issue 9, June (2015), 1-13. Doi: 10.12762/2015.AL09-03. Antolovich, S. D., Busso, E.P., Skelton, P. and Telesman, J, (eds.), High temperature materials for aerospace applications, special issue of High Temperature Materials, 33:4-5 (2016), 289-290, DOI: 10.1080/09603409.2016.1206294.

学术兼职

2012至今英国材料、矿业及采矿协会会士 2000至今 Philosophical Magazine杂志《Physics of Condensed Matter》副主编、顾问委员会成员 1999-2004 美国机械工程学会《Journal of Engineering Materials and Technology》杂志副主编 1997-2008 《International Journal of Plasticity》杂志编委会成员、特邀编委