近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
W.Z. Bao, X.X. Yang, J. Chen, T. Xiang, T.J. Zhou and G.Q. Xie*: “Strengthening and toughening of Cu matrix composites reinforced by metallic glass particles with variable size”, International Journal of Plasticity, 162 (2023) 103530 (13 pages). DOI: 10.1016/j.ijplas.2023.103530
X.X. Yang, P. Du, K. Li, W.Z. Bao, T. Xiang, J. Chen, X.J. Liu* and G.Q. Xie*: “Optimization of mechanical properties and corrosion resistance of Zn-0.4Mn-0.8Li alloy using the hot rolling process”, Journal of Materials Science & Technology, 145 (2023) 136-147, DOI: 10.1016/j.jmst.2022.10.055
J. Chen, T. Xiang, W.Z. Bao, B.H. Yu, J.Z. Li, Y.X. Wang, T.J. Zhou, P. Du and G.Q. Xie*: “Novel strength-electrical conductivity synergy in Cu-based composites reinforced with TiZrNbTa high entropy alloy”, Materials Science and Engineering A, 878 (2023) 145210 (9 pages). DOI: 10.1016/j.msea.2023.145210
K. Li, S.J. Zhou, W.Z. Bao, J. Chen, J.Z. Li and G.Q. Xie*: “New biodegradable Mg-Zn-Ca bulk metallic glass composite with large plasticity reinforced by SnZn alloy”, Materials Science and Engineering A, 873 (2023) 145045 (8 pages). DOI: 10.1016/j.msea.2023.145045
P. Du, T. Xiang, X.X. Yang and G.Q. Xie*: “Optimization of bioactivity and antibacterial properties of porous Ti-based bulk metallic glass through chemical treatment”, Ceramics International, 49 (2023) 13960-13971. DOI: 10.1016/j.ceramint.2022.12.278
T.J. Zhou, Q. Liu, X.H. Lu, W.M. Pan, R.H. Liu, G.Q. Xie*, M.F. Li and C. Wang: “Microstructure modification and coercivity enhancement of sintered NdFeB magnet by vacuum diffusion 70Tb-20Cu-10Ga (at%) alloys”, Vacuum, 212 (2023) 112022 (7 pages). DOI: 10.1016/j.vacuum.2023.112022
H.T. Xu, Z.Y. Jin, Y.H. Zhang, X. Lin, G.Q. Xie, X.J. Liu and H.J. Qiu*: “Designing strategies and enhancing mechanism for multicomponent high-entropy catalysts”, Chemical Science, 14 (2023) 771-790. DOI: 10.1039/d2sc06403k
T.J. Zhou, J. Chen, Q.R. Wang, W.M. Pan, Q.F. Huang, R.H. Liu, M.F. Li and G.Q. Xie*: “Super-high coercivity NdFeB magnet fabricated with double Tb-rich/lean shells by double alloy method and grain boundary diffusion”, Journal of Alloys and Compounds, 937 (2023) 168368 (9 pages). DOI: 10.1016/j.jallcom.2022.168368
P. Du, B.H. Li, J. Chen, K. Li and G.Q. Xie*: “Novel Ti-based bulk metallic glass free of toxic and noble elements for bio-implant applications”, Journal of Alloys and Compounds, 934 (2023) 167996 (10 pages). DOI: 10.1016/j.jallcom.2022.167996
T. Xiang, M. Zhao, P. Du and G.Q. Xie*: “Heat treatment effects on microstructure and mechanical properties of TiZrNbTa high-entropy alloy”, Journal of Alloys and Compounds, 930 (2023) 167408 (14 pages). DOI: 10.1016/j.jallcom.2022.167408
W.Z. Bao, T. Xiang, J. Chen, P. Du, Z.W. Zhang and G.Q. Xie*: “Corrosion behavior of high-performance crystalline CuCrZr/amorphous CuZrAl composites in NaCl solution”, Journal of Materials Research and Technology, 21 (2022) 5004-5017, DOI: 10.1016/j.jmrt.2022.11.104
Z.Y. Cai, X. Cheng, J.Y. Chen, T. Xiang and G.Q. Xie*: “Optimized mechanical properties of titanium-oxygen alloys by powder metallurgy”, Journal of Materials Research and Technology, 21 (2022) 4151-4163, DOI: 10.1016/j.jmrt.2022.11.029
Y.Y. Zhang, X.R. Lin, X.W. Tang, K.L. Hu*, X. Lin, G.Q. Xie, X.J. Liu and H.J. Qiu*: “Ultrathin polyaniline-coated single-crystalline Mn2O3 nanoporous ellipsoids with high energy density and cyclability for low-cost zinc-ion batteries”, ACS Applied Nano Materials, 5(9) (2022) 12729-12736, DOI: 10.1021/acsanm.2c02627
Z.Y. Cai, T. Xiang, W.Z. Bao, J.Y. Chen, T. Gao and G.Q. Xie*: “Enhancing strength and ductility of pure titanium by interstitial oxygen atom”, Materials Science and Engineering A, 854 (2022) 143806 (7 pages). DOI: 10.1016/j.msea.2022.143806
T.J. Zhou, R.H. Liu, P.P. Qu, G.Q. Xie*, M.F. Li, Z.C. Zhong: “Diffusion behavior and coercivity enhancement of Tb-containing NdFeB magnet by dip-coating TbH3”, Journal of Materials Research and Technology, 20 (2022) 1391-1398, DOI: 10.1016/j.jmrt.2022.07.167
T. Xiang, W.Z. Bao, M. Zhao, P. Du, Z.Y. Cai and G.Q. Xie*: “Ultra-high strength TiZrNbTa high entropy alloy substrate coated by coral-like metal oxide nanotubes to enhance biocompatibility”, Journal of Alloys and Compounds, 923 (2022) 166408 (12 pages). DOI: 10.1016/j.jallcom.2022.166408
Z.Y. Cai, J.Y. Chen, Z. Zhang, K. Li, X.X. Yang and G.Q. Xie*: “Microstructure regulation of titanium-oxygen alloy with high strength and excellent ductility for biomedical applications”, Intermetallics, 148 (2022) 107648 (7 pages).
Z.W. Zhang, H.H. Yao, Q. Wang, W. Xue, Y. Wang*, L. Yin, X.Y. Wang, X.F. Li, C. Chen, J.H. Sui, X. Lin, Y. Chen, X.J. Liu, J. Mao*, G.Q. Xie*, Q. Zhang*: “Achieving high thermoelectric performance in severely distorted YbCd2Sb2”, Advanced Functional Materials, 2022, 2205215 (7 pages).
T. Xiang, P. Du, W.Z. Bao, Z.Y. Cai, K. Li and G.Q. Xie*: “Bimodal grain size structure design to optimize the mechanical properties of TiZrNbTa high entropy alloys/Ti composites”, Materials Science and Engineering A, 849 (2022) 143488 (9 pages).
J.Y. Chen, Z.Y. Cai, T. Xiang, P. Du and G.Q. Xie*: “A titanium-nitrogen alloy with ultrahigh strength by ball milling and spark plasma sintering”, Materials Science and Engineering A, 848 (2022) 143465 (10 pages).
Z.Y. Cai, J.Y. Chen and G.Q. Xie*: “Mechanical properties and corrosion resistance of large-size biodegradable Ca-Mg-Zn bulk metallic glasses fabricated via powder metallurgy”, Intermetallics, 148 (2022) 107633 (6 pages).
X.R. Lin, Y.X. Hu, K.L. Hu*, X. Lin, G.Q. Xie, X.J. Liu, K.M. Reddy and H.J. Qiu*: “Inhibited surface diffusion of high-entropy nano-alloys for the preparation of 3D nanoporous graphene with high amounts of single atom dopants”, ACS Materials Letters, 4 (2022) 978-986.
W.Z. Bao, J. Chen and G.Q. Xie*: “Optimized strength and conductivity of multi-scale copper alloy/metallic glass composites tuned by a one-step spark plasma sintering (SPS) process”, Journal of Materials Science & Technology, 128 (2022) 22-30.
G.Q. Xie* and Z.W. Huang: “Optimizing mechanical and electrical properties of Cu-coated Cu-Zr-Al bulk metallic glass composites by adjusting glassy powder size”, Intermetallics, 146 (2022) 107570 (10 pages).
B.B. Yang, C.Y. Shi, R.L. Lai, D.F. Shi, D.K. Guan, G.M. Zhu, Y.J. Cui*, G.Q. Xie, Y.P. Li*, A. Chiba, J. Lorca*: “Identification of active slip systems in polycrystals by slip trace-modified lattice rotation analysis (ST-MLRA)”, Scripta Materialia, 214 (2022) 114648 (7 pages).
Y.Y. Zhang, X.X. Yang, Y.X. Hu, K.L. Hu, X. Lin, X.J. Liu, K. M. Reddy*, G.Q. Xie*, H.J. Qiu*: “Highly strengthened and toughened Zn-Li-Mn alloys as long-cycling life and dendrite-free Zn anode for aqueous zinc-ion batteries”, Small, 2022, 2200787 (7 pages).
P. Du, T. Xiang, Z.Y. Cai and G.Q. Xie*: “The influence of porous structure on the corrosion behavior and biocompatibility of bulk Ti-based metallic glass”, Journal of Alloys and Compounds, 906 (2022) 164326 (8 pages).
T. Xiang, P. Du, Z.Y. Cai, K. Li, W.Z. Bao, X.X. Yang and G.Q. Xie*: “Phase-tunable equiatomic and non-equiatomic Ti-Zr-Nb-Ta high-entropy alloys with ultrahigh strength for metallic biomaterials”, Journal of Materials Science & Technology, 117 (2022) 196-206.
Z.F. Yao, T. Yang, M.J. Yang, X. Jia, C.L. Wang, J.X. Yu, Z. Li, H.Y. Han, W.H. Liu, G.Q. Xie, S.Y. Yang, Q. Zhang, C.P. Wang*, S. Wang*, X.J. Liu*: “Martensite colony engineering: a novel solution to realize the high ductility in full martensitic 3D-printed Ti alloys”, Materials & Design, 215 (2022) 110445 (11 pages).
P. Du, T. Xiang, X.X. Yang and G.Q. Xie*: “Enhanced mechanical and antibacterial properties of Cu-bearing Ti-based bulk metallic glass by controlling porous structure”, Journal of Alloys and Compounds, 904 (2022) 164005 (11 pages).
W.Z. Bao, J. Chen, X.X. Yang, T. Xiang, Z.Y. Cai, G.Q. Xie*: “Improved strength and conductivity of metallic-glass-reinforced nanocrystalline CuCrZr alloy”, Materials & Design, 214 (2022) 110420 (9 pages).
Z.W. Zhang, H.H. Yao, X. Jia, X.Y. Wang, X.F. Li, C. Chen, X. Lin, J.H. Sui, X.J. Liu, J. Mao*, G.Q. Xie*, Q. Zhang*: “Band convergence and phonon engineering to optimize the thermoelectric performance of CaCd2Sb2”, Applied Physics Letters, 120 (2022) 041901 (5 pages).
P. Du, K. Li, B. Zhu, T. Xiang and G.Q. Xie*: “Development of non-toxic low-cost bioactive porous Ti-Fe-Si bulk metallic glass with bone-like mechanical properties for orthopedic implants”, Journal of Materials Research and Technology, 17 (2022) 1319-1329.
J. Chen, B.H. Li, W.Z. Bao, Z.Y. Cai, G.Q. Xie*: “Achieving high strength and high conductivity of bulk metallic glass composites by controlled milling process”, Journal of Alloys and Compounds, 902 (2022) 163849 (9 pages).
Z.Y. Jin, J. Lyu, K.L. Hu, Z.H. Chen, G.Q. Xie, X.J. Liu, X. Lin, H.J. Qiu*: “Eight-component nanoporous high-entropy oxides with low Ru contents as high-performance bifunctional catalysts in Zn-air batteries”, Small, JAN 2022, 2107207 (9 pages).
T.T. Yu, Y.Y. Zhang, Y.X. Hu, K.L. Hu, X. Lin, G.Q. Xie, X.J. Liu, K.M. Reddy*, Y. Ito, H.J. Qiu*: “Twelve-component free-standing nanoporous high-entropy alloys for multifunctional electrocatalysis ”, ACS Materials Letters, 4 (2022) 181-189.
K. Li, B.H. Li, P. Du, T. Xiang, X.X. Yang, G.Q. Xie*: “Effect of powder size on strength and corrosion behavior of Mg66Zn30Ca4 bulk metallic glass”, Journal of Alloys and Compounds, 897 (2022) 163219 (8 pages).
K. Li, L.X. Liang, P. Du, Z.Y. Cai, T. Xiang, H. Kanetaka, H. Wu* and G.Q. Xie*: “Mechanical properties and corrosion resistance of powder metallurgical Mg-Zn-Ca/Fe bulk metal glass composites for biomedical application”, Journal of Materials Science & Technology, 103 (2022) 73-83. (封面论文)
Y.Y. Zhang, X.P. Kong, X.R. Lin, K.L. Hu*, W.W. Zhao*, G.Q. Xie, X. Lin, X.J. Liu, Y. Ito, H.J. Qiu*: “Enhanced bifunctional catalytic activities of N-doped graphene by Ni in a 3D trimodal nanoporous nanotubular network and its ultralong cycling performance in Zn-air batteries”, Journal of Energy Chemistry, 66 (2022) 466-473.
B.B. Yang, C.Y. Shi, X.J. Ye, J.W. Teng, R.L. Lai*, Y.J. Cui*, D.F. Shi, D.K. Guan, G.Q. Xie, Y.P. Li* and A. Chiba: “A novel strategy to strengthen the hexagonal closepacked (HCP) alloys”, Journal of Alloys and Compounds, 893 (2022) 162346 (11 pages).
K. Li, Z.Y. Cai, P. Du, T. Xiang, X.X. Yang and G.Q. Xie*: “Core-shell Mg66Zn30Ca4 bulk metallic glasses composites reinforced by Fe with high strength and controllable degradation”, Intermetallics, 138 (2021) 107334 (9 pages).
J.J. Gao, Y.X. Hu, Y. Wang, X.R. Lin, K.L. Hu, X. Lin, G.Q. Xie, X.J. Liu, K.M. Reddy, Q.H. Yuan*, H.J. Qiu*: “MOF structure engineering to synthesize Co-N-C catalyst with richer accessible active sites for enhanced oxygen reduction”, Small, NOV 2021, 2104684 (9 pages).
Y.Y. Zhang, J. Lyu, Y.L. Zhao, K.L. Hu, Z.H. Chen, X. Lin, G.Q. Xie, X.J. Liu, H.J. Qiu*: “In situ coupling of Ag nanoparticles with high-entropy oxides as highly stable bifunctional catalysts for wearable Zn-Ag/Zn-air hybrid batteries”, Nanoscale, 13 (2021) 16164-16171.
T.J. Zhou, Y. Guo, G.Q. Xie*, S.U. Rehman, R.H. Liu*, J.R. Liu, P.P. Qu and M.F. Li: “Coercivity and thermal stability enhancement of NdFeB magnet by grain boundary diffusion Tb80Al20 alloys”, Intermetallics, 138 (2021) 107335 (5 pages).
W.Z. Bao, H. Yan, J. Chen and G.Q. Xie*: “High strength conductive bulk Cu-based alloy/metallic glass composites fabricated by spark plasma sintering”, Materials Science and Engineering A, 825 (2021) 141919 (9 pages).
Z.Y. Cai, J.Y. Chen, P. Du, T. Xiang, J. Chen and G.Q. Xie*: “Mechanical behavior and microstructure control of the low-cost titanium-oxygen alloy prepared by ball milling and spark plasma sintering”, Journal of Alloys and Compounds, 887 (2021) 161349 (9 pages).
P. Du, B. Zhu, X.X. Yang and G.Q. Xie*: “Toxic elements-free low-cost Ti-Fe-Si metallic glass biomaterial developed by mechanical alloying”, Journal of Alloys and Compounds, 886 (2021) 161290 (8 pages).
K.L. Hu*, T.T. Yu, Y.Y. Zhang, X.R. Lin, Y.L. Zhao, G.Q. Xie, X.J. Liu, X. Lin, J.I. Fujita, H.J. Qiu* and Y. Ito*: “Inhibiting surface diffusion to synthesize 3D bicontinuous nanoporous N-doped carbon for boosting oxygen reduction reaction in flexible all-solid-state Al-air batteries”, Advanced Functional Materials, 2021, 2103632 (7 pages). (Back Cover).
W.Z. Bao, T. Xiang, Z.Y. Cai, J. Chen, L.K. Bao and G.Q. Xie*: “A first-principles prediction of electronic, mechanical and thermodynamic properties of α-LuAlB4 and β-LuAlB4 ceramics”, Vacuum, 191 (2021) 110375 (12 pages).
P. Du, Z.W. Wu, K. Li, T. Xiang and G.Q. Xie*: “Porous Ti-based bulk metallic glass orthopedic biomaterial with high strength and low Young's modulus produced by one step SPS”, Journal of Materials Research and Technology, 13 (2021) 251-259.
T. Xiang, Z.Y. Cai, P. Du, K. Li, Z.W. Zhang and G.Q. Xie*: “Dual phase equal-atomic NbTaTiZr high-entropy alloy with ultra-fine grain and excellent mechanical properties fabricated by spark plasma sintering”, Journal of Materials Science & Technology, 90 (2021) 150-158.
Z.Y. Jin, J. Lyu, Y.L. Zhao*, H.L. Li*, Z.H. Chen, X. Lin, G.Q. Xie, X.J. Liu, J.J. Kai and H.J. Qiu*: “Top-down synthesis of noble metal particles on high-entropy oxide supports for electrocatalysis”, Chemistry of Materials, 33 (2021) 1771-1780.
Z.W. Wu, P. Du, T. Xiang, K. Li and G.Q. Xie*: “Ti-based bulk metallic glass implantable biomaterial with adjustable porosity produced by a novel pressure regulation method in spark plasma sintering”, Intermetallics, 131 (2021) 107105 (7 pages).
Y.H. Li, X.J. Jia, W. Zhang*, Y. Zhang, G.Q. Xie, Z.Y. Qiu, J.H. Luan, Z.B. Jiao: “Formation and crystallization behavior of Fe-based amorphous precursors with pre-existing α-Fe nanoparticles- structure and magnetic properties of high-Cu-content Fe-Si-B-Cu-Nb nanocrystalline alloys”, Journal of Materials Science & Technology, 65 (2021) 171-181.
T.J. Zhou, P.P. Qu, W.M. Pan, R.H. Liu, M.F. Li, S.U. Rehman, Z.C. Zhong* and G.Q. Xie*: “Sintered NdFeB magnets with Tb-Dy double-layer core/shell structure were fabricated by double alloy method and grain boundary diffusion”, Journal of Alloys and Compounds, 856 (2021) 158191 (7 pages).
Z.Y. Jin, J. Lyu, Y.L. Zhao, H.L. Li*, X. Lin, G.Q. Xie, X.J. Liu, J.J. Kai and H.J. Qiu*: “Rugged high-entropy alloy nanowires with in situ formed surface spinel oxide as highly stable electrocatalyst in Zn-air batteries”, ACS Materials Lett., 2020, 2, 1698-1706.
S.Y. Li, J.Q. Wang, X. Lin, G.Q. Xie, Y. Huang*, X.J. Liu and H.J. Qiu*: “Flexible solid-state direct ethanol fuel cell catalyzed by nanoporous high-entropy Al-Pd-Ni-Cu-Mo anode and spinel (AlMnCo)3O4 cathode”, Advanced Functional Materials, 2020, 2007129.
S.Y. Li, X.Y. Zhou, G. Fang, G.Q. Xie, X.J. Liu, X. Lin* and H.J. Qiu*: “Multicomponent spinel metal oxide nanocomposites as high-performance bifunctional catalysts in Zn-air batteries”, ACS Applied Energy Materials, 3 (2020) 7710-7718.
Z.W. Zhang, Y. Yan, X.F. Li, X.Y. Wang, J. Li, C. Chen, F. Cao, J. Sui, X. Lin, X.J. Liu, G.Q. Xie*, Q. Zhang*: “A dual role by incorporation of magnesium in YbZn2Sb2 Zintl phase for enhanced thermoelectric performance”, Advanced Energy Materials, 2020, 200122.
Z.W. Huang, Z.W. Wu, X. Cheng, Z.W. Zhang, G.Q. Xie*: “Bulk metallic glass composites with high strength and electrical conductivity by sintering Cu-coated CuZrAl glassy powder”, Journal of Alloys and Compounds, 841 (2020) 155723 (8 pages).
P. Du, K.L. Hu, J. Lyu, H.L. Li*, X. Lin, G.Q. Xie, X.J. Liu, Y. Ito*, H.J. Qiu*: “Anchoring Mo single atoms/clusters and N on edge-rich nanoporous holey graphene as bifunctional air electrode in Zn？air batteries”, Applied Catalysis B: Environmental, 276 (2020) 119172 (8 pages).
J.J. Gao, X.W. Tang, P. Du, H.L. Li*, Q.H. Yuan*, G.Q. Xie and H.J. Qiu*: “Synergistically coupling ultrasmall PtCu nanoalloys with highly porous CoP nanosheets as an enhanced electrocatalyst for electrochemical hydrogen evolution”, Sustainable Energy & Fuels, 4(5) (2020) 2551-2558.
Z.Y. Cai, K. Li and G.Q. Xie*: “Optimizing strength and ductility of titanium alloys by oxygen: review and prospect”, Chinese Journal of Structural Chemistry, 39 (4) (2020) 615-622.
G. Fang, J.J. Gao, J. Lv, H.L. Jia, H.L. Li*, W.H. Liu, G.Q. Xie, Z.H. Chen, Y. Huang, Q.H. Yuan, X.J. Liu, X. Lin, S.H. Sun, H.J. Qiu*: “Multi-component nanoporous alloy/(oxy)hydroxide for bifunctional oxygen electrocatalysis and rechargeable Zn-air batteries”, Applied Catalysis B: Environmental, 268 (2020) 118431 (9 pages).
S.Y. Li, X.W. Tang, H.L. Jia, H.L. Li*, G.Q. Xie, X.J. Liu, X. Lin and H.J. Qiu*: “Nanoporous high-entropy alloys with low Pt loadings for high-performance electrochemical oxygen reduction”, Journal of Catalysis, 383 (2020) 164-171.
Z. Wang*, M.S. Xie, W.W. Zhang, C. Yang, G.Q. Xie and D.V. Louzguine: “Achieving super-high strength in an aluminum based composite by reinforcing metallic glassy flakes”, Materials Letters, 262 (2020) 127059 (3 pages).
京公网安备 11010802027423号