近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Participate in The Handbook for Electrical Engineer,Press of Mechanical Industry,China,June 2007.
Jin Zhu,Wenjun Yan,Advanced Predictive Control,Press of Zhejiang University,June 2002.
Wenjun Yan,Shuqin Chen and Feng Lin,Control Theory and Computer Aided Design,Press of Science,China,October 2002.
Main Papers(2006-Present):
Guo,Xiaogang,Bao,Zhejing,Li,Zhijie,Yan,Wenjun,“Adaptively Constrained Stochastic Model Predictive Control for the Optimal Dispatch of Microgrid”,Energies,2018.
Hu,Chun-zhi,Yang,Qiang,Huang,Miao-ying,Yan,Wen-jun,“Sparse component analysis-based under-determined blind source separation for bearing fault feature extraction in wind turbine gearbox”,IET Renewable Power Generation,2017.
Hu,Chun-zhi,Yang,Qiang,Huang,Miao-ying,Yan,Wen-jun,“Diagnosis of non-linear mixed multiple faults based on underdetermined blind source separation for wind turbine gearbox:Simulation,testbed and realistic scenarios”,IET Renewable Power Generation,2017.
Li,Xiaoxia,Yang,Qiang,Chen,Zhebo,Luo,Xuejing,Yan,Wenjun,“Visible defects detection based on UAV-based inspection in large-scale photovoltaic systems”,IET Renewable Power Generation,2017.
Yang,Qiang,Yan,Wenjun,Huang,Miaoying,Yang,Qian,Hu,Chunzhi,“Signal processing based mechanical fault prognosis and diagnosis of operating wind turbines in wind farms”,Advances in Energy Research,2017.
F.Wu,D.Zhang,X.Li,X.Luo,Q.Yang,W.Yan,'Aerial image recognition and matching for inspection of large-scale photovoltaic farms',IEEE International Smart Cities Conference,Wuxi,Jiangsu,June 2017.
D.Zhang,F.Wu,X.Li,X.Luo,Q.Yang,W.Yan,'Aerial image analysis based on improved adaptive clustering for photovoltaic modules inspection,'IEEE International Smart Cities Conference,Wuxi,Jiangsu,June 2017.
H.Wang,Q.Yang,B.Yan,W.Yan,'On optimal path planning for UAV based patrolling in complex 3D topographies',in Proc.IEEE Int.Conf.on Information and Automation(ICIA),May 2016.
S.Sun,Q.Yang,W.Yan,'A novel statistical modeling approach of PEV charging demand based on Markov model',in Proc.CICED,2016.
X.Li,Q.Yang,B.Yan,W.Yan,'UAV moving target tracking and recognition based on corner detection method',in Proc.IEEE Int.Conf.on Information and Automation(ICIA),May 2016.
Q.Yang,Q.Yang,W.Yan,M.Huang,C.Hu,'On prognosis of wind turbine faults based on nonlinear mixed vibration signals:an EMD and KICA combined approach',in Proc.World Congress on Intelligent Control and Automation,Guilin,June 2016.
Zhang,Youjian,Yang,Qiang,Yan,Wenjun,'Network-based leader-following consensus for second-order multi-agent systems with nonlinear dynamics',TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,2016.
Fang,Xinli,Yang,Qiang,Wang,Jianhui,Yan,Wenjun,'Coordinated dispatch in multiple cooperative autonomous islanded microgrids',APPLIED ENERGY,2016.
Q.Wang,Q.Yang,W.Yan,'Optimal dispatch in residential community with DGs and storage under real-time pricing,'in Proc.IEEE International Conf.Information and Automation,Yunnan,2015.
J.Yao,Q.Yang,W.Yan,'Scalable DG-based power supply restoration in distribution network under blackouts,'in Proc.International Conference on Environmental Science and Material Application,2015.
X.Fang,Q.Yang,W.Yan,'Outer synchronization for a class of generalized nonlinear delay networks,'in Proc.IEEE International Conf.Information and Automation,July 27-30,Innermongolia,2014.
B.Ruan,Q.Yang,X.Fang,W.Yan,'Demand response under real-time pricing for domestic energy system with DGs,'in Proc.IEEE Int'l Conf.on Power System Technology(PowerCon'04),Chengdu,Oct.2014.
C.Ma,Q.Yang,W.Yan,'On the hierarchical control framework for distributed energy storage management in large-scale distribution networks,'in Proc.IEEE Int'l Conf.on Power System Technology(PowerCon'04),Chengdu,Oct.2014.
G.Shen,W.Yan,Q.Yang,'Adaptive control approach for PMSM based on parameter identification:a simulation perspective,'Proc.IET International Conference on Information Science&Control Engineering,pp.835-839,Sapporo,Japan,Apirl 2014.
G.Chen,Q.Yang,Z.Bao,W.Yan,'Real-time wind power stabilization approach based on hybrid energy storage systems',Proc.International Conference on Advanced Computational Intelligence,Hangzhou,2013.
T.Zhang,Z.Bao,G.Chen,Q.Yang,W.Yan,'Control strategy for a hybrid energy storage system to mitigate wind power fluctuations'Proc.International Conference on Advanced Computaional Intelligence,Hangzhou,2013.
R.Sun,W.Yan,Q.Yang,Z.Bao,J.Zhang,'Power quality assessment of offshore wind farms based on PSCAD/EMTDC models,'Proc.International Conference on Advanced Computational Intelligence,Hangzhou,June 2013.
J.Zhang,W.Yan,Q.Yang,Z.Bao,R.Sun,'Power quality measurement and analysis of offshore wind farms,'Proc.International Conference on Advanced Computational Intelligence,Hangzhou,June 2013.
G.Chen,Z.Bao,Q.Yang,W.Yan,'Scheduling strategy of hybrid energy storage system for smoothing the output power of wind farm,'Proc.IEEE International Conference on Control and Automation(IEEE ICCA'13),Hangzhou,PRC.June 2013.
F.Zhao,Z.Bao,Q.Yang,W.Yan,'Equivalent model and static var compensation for offshore wind farm implemented on PSCAD/EMTDC,'Proc.IEEE International Conference on Control and Automation(IEEE ICCA'13),Hangzhou,PRC.June 2013.
Y.Dong,Q.Yang,W.Yan,'Short-term electricity price forecasting based on MPSO-BP algorithm',Proc.International Workshop on Electromagnetism and Communication Engineering,Nov.2012.
L.Guo,Q.Yang,W.Yan,'Intelligent path planning for automated guided vehicle system based on topological map,'Proc.IEEE International Conference on Control,System and Industrial Informatics,Dec.2012.
W.Wu,Q.Yang,W.Yan,'On the design of incremental predictive functional control algorithm,'Electrical,Information Engineering and Mechatronics,Lecture Notes in Electrical Engineering,X.Wang et al.(eds.),Springer-Verlag London Limited UK,2012.
C.Li,W.Yan,Q.Yang,'Power factor optimization of distributed generators in distribution networks based on improved particle swarm optimization method,'Proc.International Conference on Energy and Environmental Protection(ICEEP'12),Hohhot,Inner Mongolia,23-24 June 2012.
Q.Yang,W.Yan,'Improving the communication performance in multi-agent system for distributed manufacturing process control,'Proc.Int'l Conference on Manufacturing Science and Engineering,Ximen,China,April.2012.
Z.Liu,Q.Yang,W.Yan,'Intelligent modelling and predictive control of pre-grinding systems,'Proc.IEEE Int'l Conf.on Manufacturing and Industrial Engineering,Haikou,China,22-24 Feb.2011,published in Journal of Advanced Material Research,vol.433-440,p.2120-2127,Jan.2012.
W.Qin,W.Yan,Q.Yang,'Model identification and predictive control in vertical roller mill grinding process,'Proc.IEEE Int'l Conf.on Computer Engineering and Applications,15-17 July 2011.
Q.Sun,H.Liu,Q.Yang,W.Yan,'On the design of AGVs:modelling,path planning and localization,'Proc.IEEE Int'l Conf.on Mechantronics and Automation,Beijing,7-10 August 2011.(DOI:10.1109/ICMA.2011.5985974)
W.Wu,Q.Yang,W.Yan,'Fast extraction strategy of support vector machines,'Proc.Int'l Conf.on Intell.Sys.and Knowledge Engin.Shanghai,published in Fundations of Intelligent Systems,Advances in Intelligent and Soft Computing,vol.122,Dec.2011.
H.Liu,Q.Yang,W.Yan,'Application of fault diagnosis expert system in furnace silicon content control',Proc.IEEE Int.Conf.on computer and software modelling,Manila,Philippines.Dec.4-5,2010.
Zhejing Bao,Quanyuan Jiang,Wenjun Yan,Stability of the spreading in small-world network with predictive controller(in English),PHYSICS LETTERS A,No.13-14,Vol.374,March 2010.(SCI)
Qingguo Wang,Wenjun Yan,Peiliang Wang,The Research of signal synchronization for Duffing chaotic system with uncertainty(in English),IEEE International Conference on Control and Automation,DEC 09-11,2009 Christchurch,NEW ZEALAND.(EI)
Bo Pang,Jinfeng Zhang,Wenjun Yan,On Signal Collection and Processing of Non-Contact Torque Sensor(in Chinese),27th Chinese Control Conference,JUL 16-18,2008 Kunming,PEOPLES R CHINA.(EI)
Jun Zheng,Wenjun Yan,A Distributed Formation Control Algorithm and Stability Analysis(in Chinese),Acta Automatica Sinica,Sep.2008.(EI)
Jun Zheng,Wenjun Yan,Sufficient condition on stability of multi-agent rendezvous discrete algorithm(in Chinese),Journal of Zhejiang University(Engineering Science),Oct.2007.(EI)
Jun Zheng,Wenjun Yan,Weight-balancing algorithm for distributed dynamic networks of multi-agent systems(in Chinese),Journal of Zhejiang University(Engineering Science),Dec.2007.(EI)
Yang Yang,Wenjun Yan,Software Design of an intelligent car System based on mu C/OS-II(in Chinese),25th Chinese Control Conference,AUG 07-10,2006 Harbin,PEOPLES R CHINA,August 2006.(EI)
Yuliang Ma,Wenjun Yan,Donglian Qi,Research on method of fuzzy sets rules reduction for real value information system(in English),International Conference on Complex Systems and Applications,JUN 16-18,2006 Huhhot,PEOPLES R CHINA.(SCI)
Yuliang Ma,Wenjun Yan,Dongliang Liu,H-infinity control of discrete switched systems with time delay via state feedback with memory(in English),6th World Congress on Intelligent Control and Automation,JUN 21-23,2006 Dalian,PEOPLES R CHINA.(EI)
Yuliang Ma,Wenjun Yan,RSVR algorithm based on support in association rules(in Chinese),6th World Congress on Intelligent Control and Automation,June 21-23,2006 Dalian,PEOPLES R CHINA.(EI)
Yanhu Zhang,Wenjun Yan,Guangzhou Zhao,Robust Gl_2 filter design for uncertain discrete-time systems(in Chinese),Journal of Zhejiang University(Engineering Science),July 2006.(EI)
Yuliang Ma,Jiaqiang Yang,Wenjun Yan,Rules reduction for real value information system based on fuzzy similarity(in Chinese),Journal of Zhejiang University(Engineering Science),Sep.2006.(EI)
Conference List
ICCSM 2010,Manila,Dec.4-5,2010
The 2010 IEEE International Conference on Automation and Logistics,HongKong China,August 16-20,2010
IEEE WCICA 2010,Jinan,Shandong,July 7-9,2010
ICECE 2010,Wuhan,China,June 26-28,2010
2009 IEEE International Conference on Control and Automation，Christchurch,New Zealand,Dec.9-11,2009
27th Chinese Control Conference,Kunming,China,July 16-18,2008
Patent List
Multi-variable predictive control method of Burning system based on impulse response model
Embedded DSP optimization and energy saving controller based on DCS platform
Metallurgical joint model based on intelligent systems for multi-variable constrained Predictive Control method of blast furnace system based on intelligent joint model
Pre-grinding system control method based on fuzzy intelligent control and optimization methods
The vertical mill system control method based on model identification and predictive control
京公网安备 11010802027423号