近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Feng R, Young B*. Experimental investigation of cold-formed stainless steel tubular T-joints. Thin-Walled Structures, Elsevier Science, 2008, Vol. 46, No. 10, pp: 1129-1142.
Feng R, Young B*. Tests of concrete-filled stainless steel tubular T-joints. Journal of Constructional Steel Research, Elsevier Science, 2008, Vol. 64, No. 11, pp: 1283-1293.
Feng R, Young B*. Behaviour of concrete-filled stainless steel tubular X-joints subjected to compression. Thin-Walled Structures, Elsevier Science, 2009, Vol. 47, No. 4, pp: 365-374.
Feng R, Young B*. Investigation of concrete-filled stainless steel tubular X-joints. Journal of Civil Engineering Research and Practice, 2009, Vol. 6, No. 1, pp: 77-87.
Feng R, Young B*. Design of concrete-filled stainless steel tubular connections. Advances in Structural Engineering, 2010, Vol. 13, No. 3, pp: 471-492.
Feng R, Young B*. Tests and behaviour of cold-formed stainless steel tubular X-joints. Thin-Walled Structures, Elsevier Science, 2010, Vol. 48, No. 12, pp: 921-934.
Feng R, Young B*. Design of cold-formed stainless steel tubular T- and X-joints. Journal of Constructional Steel Research, Elsevier Science, 2011, Vol. 67, No. 3, pp: 421-436.
Feng R, Young B*. Design of cold-formed stainless steel tubular joints at elevated temperatures. Engineering Structures, Elsevier Science, 2012, Vol. 35, pp: 188-202.
Feng R, Young B*. Stress concentration factors of cold-formed stainless steel tubular X-joints. Journal of Constructional Steel Research, Elsevier Science, 2013, Vol. 91, pp: 26-41.
Chen Y, Feng R*, Wang J. Behaviour of bird-beak square hollow section X-joints under in-plane bending. Thin-Walled Structures, Elsevier Science, 2015, Vol. 86, pp: 94-107.
Feng R, Young B*. Theoretical analysis of cold-formed stainless steel tubular joints. Engineering Structures, Elsevier Science, 2015, Vol. 83, pp: 99-115.
Chen Y, Feng R*, Wang J. Behaviour of bird-beak square hollow section X-joints under out-of-plane bending. Journal of Constructional Steel Research, Elsevier Science, 2015, Vol. 106, pp: 234-245.
Chen Y, Feng R*, Wang CY. Tests of bare and concrete-filled CHS T-joints with concave chord under axial compression. Construction and Building Materials, Elsevier Science, 2015, Vol. 93, pp: 144-156.
Feng R, Chen Y*, Wei L, Ruan XF. Behaviour of CHS brace-to-H-shaped chord X-joints under in-plane bending. Journal of Constructional Steel Research, Elsevier Science, 2015, Vol. 114, pp: 8-19.
Feng R, Chen Y*, Gao SW, Zhang W. Numerical investigation of concrete-filled multi-planar CHS inverse-triangular tubular truss. Thin-Walled Structures, Elsevier Science, 2015, Vol. 94, pp: 23-37.
Chen Y, Feng R*, Gao SW. Experimental study of concrete-filled multiplanar circular hollow section tubular trusses. Thin-Walled Structures, Elsevier Science, 2015, Vol. 94, pp: 199-213.
Chen Y, Feng R*, Wang CY. Tests of steel and composite CHS X-joints with curved chord under axial compression. Engineering Structures, Elsevier Science, 2015, Vol. 99, pp: 423-438.
Feng R, Young B*. Experimental investigation of aluminum alloy stub columns with circular openings. Journal of Structural Engineering, ASCE, 2015, Vol. 141, No. 11, pp: 1-10.
Chen Y, Feng R*, Wei L. Design of CHS brace-to-H-shaped chord T-joints under axial compression. Thin-Walled Structures, Elsevier Science, 2016, Vol. 98, pp: 274-284.
Chen Y, Feng R*, Xiong LL. Experimental and numerical investigations on steel-concrete-PVC SHS joints under axial compression. Construction and Building Materials, Elsevier Science, 2016, Vol. 102, pp: 654-670.
Feng R, Chen Y*, Wang CY. Tests of CHS T-joints with convex chord under axial compression. Journal of Constructional Steel Research, Elsevier Science, 2016, Vol. 117, pp: 139-151.
Chen Y, Feng R*, Ruan XF. Behaviour of steel-concrete-steel SHS X-joints under axial compression. Journal of Constructional Steel Research, Elsevier Science, 2016, Vol. 122, pp: 469-487.
Chen Y, Feng R*, Xiong LL. Experimental and numerical investigations on double-skin CHS tubular X-joints under axial compression. Thin-Walled Structures, Elsevier Science, 2016, Vol. 106, pp: 268-283.
冯然*, 孟尚伟, 宋满荣. 基于ABAQUS的钢筋混凝土T构转体结构有限元分析. 建筑科学与工程学报, 2016, Vol. 33, No. 5, pp: 92-99.
Feng R*, Mou XL, Chen AY, Ma YH. Tests of aluminium alloy CHS columns with circular openings. Thin-Walled Structures, Elsevier Science, 2016, Vol. 109, pp: 113-131. (SCI, EI)
Feng R, Chen Y*, Chen DF. Experimental and numerical investigations on collar plate and doubler plate reinforced SHS T-joints under axial compression. Thin-Walled Structures, Elsevier Science, 2017, Vol. 110, pp: 75-87. (SCI, EI)
冯然*, 孟尚伟. 连续开孔实腹梁整体稳定性计算方法. 建筑科学与工程学报, 2017, Vol. 34, No. 1, pp: 9-14.
Chen Y, Feng R*, Shao YB, Zhang XT. Bond-slip behaviour of concrete-filled stainless steel circular hollow section tubes. Journal of Constructional Steel Research, Elsevier Science, 2017, Vol. 130, pp: 248-263.
Chen Y, Feng R*, Wang LP. Flexural behaviour of concrete-filled stainless steel SHS and RHS tubes. Engineering Structures, Elsevier Science, 2017, Vol. 134, pp: 159-171.
Feng R, Chen Y*, Gong WZ. Flexural behaviour of concrete-filled aluminium alloy thin-walled SHS and RHS tubes. Engineering Structures, Elsevier Science, 2017, Vol. 137, pp: 33-49.
Chen Y, Feng R*, He K, Chen XX, Huang JF. Flexural behaviour of concrete-filled stainless steel SHS and RHS tubes strengthened by CFRP. Thin-Walled Structures, Elsevier Science, 2018, Vol. 122, pp: 208-229.
Feng R, Chen Y*, Wei JG, Huang JY, Huang JF, He K. Experimental and numerical investigations on flexural behaviour of CFRP reinforced concrete-filled stainless steel CHS tubes. Engineering Structures, Elsevier Science, 2018, Vol. 156, pp: 305-321.
Feng R, Chen Y*, Wei JG, He K, Fu LQ. Behaviour of grouted stainless steel tubular X-joints with CHS chord under axial compression. Thin-Walled Structures, Elsevier Science, 2018, Vol. 124, pp: 323-342.
Chen Y, Feng R*, Gong WZ. Flexural behavior of concrete-filled aluminum alloy circular hollow section tubes. Construction and Building Materials, Elsevier Science, 2018, Vol. 165, pp: 173-186.
Chen Y, Feng R*. Behaviour of concrete-filled double-skin circular hollow section cross joints under axial compression. International Journal of Steel Structures, Springer Nature, 2018, Vol. 12, pp: 1-23.
Feng R, Chen Y*, He K, Wei JG, Chen BC, Zhang XT. Push-out tests of concrete-filled stainless steel SHS tubes. Journal of Constructional Steel Research, Elsevier Science, 2018, Vol. 145, pp: 58-69.
Feng R*, Zhu W, Wan HY, Chen AY, Chen Y**. Tests of perforated aluminium alloy SHSs and RHSs under axial compression. Thin-Walled Structures, Elsevier Science, 2018, Vol. 130, pp: 194-212.
Feng R*, Zhan HY, Meng SW, Zhu JH**. Experiments on H-shaped high-strength steel beams with perforated web. Engineering Structures, Elsevier Science, 2018, Vol. 177, pp: 374-394.
Feng R*, Lin JW, Mou XL. Experiments on hybrid tubular K-joints with circular braces and square chord in stainless steel. Engineering Structures, Elsevier Science, 2019, Vol. 190, pp: 52-65.
Feng R*, Shen CD, Lin JW. Finite-element analysis and design of aluminium alloy CHSs with circular through-holes in bending. Thin-Walled Structures, Elsevier Science, 2019, Vol. 144, Article No. 106289.
Feng R*, Liu YX, Zhu JH. Tests of CHS-to-SHS tubular connections in stainless steel. Engineering Structures, Elsevier Science, 2019/11/15, Vol. 199, Article No. 109590.
Feng R*, Liu JR. Numerical investigation and design of perforated aluminium alloy SHS and RHS columns. Engineering Structures, Elsevier Science, 2019, Vol. 199, Article No. 109591. (SCI, EI)
Feng R*, Lin JW. Numerical study of hybrid tubular K-joints with circular braces and square chord in stainless steel. Thin-Walled Structures, Elsevier Science, 2019, Vol. 145, Article No. 106390.
Zhu Y, Chen Y*, He K, Feng R**, Zhang XY, Zhu QX, Tang C. Flexural behavior of concrete-filled SHS and RHS aluminum alloy tubes strengthened with CFRP. Composite Structures, Elsevier Science, 2020, Vol. 238, Article No. 111975.
Feng R*, Chen ZM, Shen CD, Roy K, Chen BS, Lim JBP. Flexural capacity of perforated aluminium CHS tubes-An experimental study. Structures, Elsevier Science, 2020, Vol. 25, pp: 463-480.
Feng R*, Huang ZP, Chen ZM, Roy K, Chen BS, Lim JBP. Finite-element analysis and design of stainless-steel CHS-to-SHS hybrid tubular joints under axial compression. Thin-Walled Structures, Elsevier Science, 2020, Vol. 151, Article No. 106728.
Feng R, Liu YX, Zhu JH*, Xing F. Flexural behaviour of C-FRCM strengthened corroded RC continuous beams. Composite Structures, Elsevier Science, 2020, Vol. 245, Article No. 112200.
Feng R*, Wu CQ, Chen ZM, Roy K**, Chen BS, Lim JBP. An experimental study on stainless steel hybrid tubular joints with square braces and circular chord. Thin-Walled Structures, Elsevier Science, 2020, Vol. 155, Article No. 106919.
Feng R, Zhang JZ, Zhu JH*, Xing F. Experimental study on interface bonding fatigue behavior of C-FRCM composites in ICCP. Construction and Building Materials, Elsevier Science, 2020, Vol. 259, Article No. 119660.
Feng R*, Liu JR, Chen ZM, Roy K, Chen BS**, Lim JBP. Numerical investigation and design rules for flexural capacities of H-section high-strength steel beams with and without web openings. Engineering Structures, Elsevier Science, 2020, Vol. 225, Article No. 111278.
Feng R, Zhang JZ, Zhu JH*, Xing F. Experimental study on the behavior of carbon-fabric reinforced cementitious matrix composites in impressed current cathodic protection. Construction and Building Materials, Elsevier Science, 2020, Vol. 264, Article No. 120655.
Zhang JZ, Jiang BH, Feng R*, Chen R. Robustness of steel moment frames in multi-column-removal scenarios. Journal of Constructional Steel Research, Elsevier Science, 2020, Vol. 175, Article No. 106325.
Feng R*, Mou XL, Chen ZM, Roy K, Chen BS**, Lim JBP. Finite-element modelling and design guidelines for axial compressive capacity of aluminium alloy circular hollow sections with holes. Thin-Walled Structures, Elsevier Science, 2020, Vol. 157, Article No. 107027.
Feng R*, Tang C, Roy K**, Chen ZM, Chen BS, Lim JBP. An experimental study on stress concentration factors of stainless steel hybrid tubular K-joints. Thin-Walled Structures, Elsevier Science, 2020, Vol. 157, Article No. 107064.
Feng R, Li YW, Zhu JH*, Xing F. Behavior of corroded circular RC columns strengthened by C-FRCM under cyclic loading. Engineering Structures, Elsevier Science, 2021, Vol. 226, Article No. 111311.
Zhang JZ*, Li GQ, Feng R, Chen R. A simplified approach for collapse assessment of multi-storey steel framed-structures with one column loss. Journal of Constructional Steel Research, Elsevier Science, 2021, Vol. 176, Article No. 106391.
Feng R, Huang ZP, Chen ZM, Roy K*, Chen BS**, Lim JBP. Experimental study on material properties and stress concentration factors of stainless-steel hybrid tubular joints. Construction and Building Materials, Elsevier Science, 2021, Vol. 267, Article No. 121103.
Feng R, Wang J, Zhu JH*, Dong ZJ. Fatigue behavior of corroded reinforced concrete continuous beams with multi-intervention system. Engineering Structures, Elsevier Science, 2021, Vol. 231, Article No. 111748.
Feng R, Wu CQ, Chen ZM, Roy K, Chen BS*, Lim JBP. Finite element modelling and proposed design rules of stainless steel hybrid tubular joints with square braces and circular chord. Journal of Constructional Steel Research, Elsevier Science, 2021, Vol. 179, Article No. 106557.
Feng R, Tang C, Chen ZM, Roy K*, Chen BS**, Lim JBP. A numerical study and proposed design rules for stress concentration factors of stainless steel hybrid tubular K-joints. Engineering Structures, Elsevier Science, 2021, Vol. 233, Article No. 111916.
Feng R, Xu JC, Chen ZM, Roy K*, Chen BS**, Lim JBP. Numerical investigation and design rules for stress concentration factors of stainless-steel hybrid tubular joints. Thin-Walled Structures, Elsevier Science, 2021, Vol. 163, Article No. 107783.
Feng R, Chen L, Chen ZM, Chen BS*, Roy K**, Lim JBP. Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS. Journal of Constructional Steel Research, Elsevier Science, 2021, Vol. 183, Article No. 106704.
张惊宙, 李国强, 冯然*, 陈锐. 考虑边柱失效位置和根数影响的钢框架结构抗倒塌性能研究. 土木工程学报, 2021, Vol. 54, No. 8, pp: 67-74.
Feng R, Chen L, Chen ZM, Chen BS*, Roy K**, Lim JBP. Experiments on stainless steel hybrid K-joints with square braces and circular chord. Journal of Constructional Steel Research, Elsevier Science, 2021, Vol. 185, Article No. 106865.
Qu H, Zhang W, Kou CN, Feng R*, Pan JD. Experimental investigation of corroded CHS tubes in the artificial marine environment subjected to impact loading. Thin-Walled Structures, Elsevier Science, 2021, Vol. 169, Article No. 108485.
Feng R, Zhang JZ, Li YW, Zhu JH*. Experimental study on hysteretic behavior for corroded circular RC columns retrofitted by ICCP-SS. Structures, Elsevier Science, 2022, Vol. 35, pp: 421-435.
Zhang JZ, Yam MCH, Feng R*. Analytical prediction on static collapse resistance of steel frames in multi-interior-column-removal scenarios. Structure and Infrastructure Engineering, Taylor & Francis, 2021, DOI: 10.1080/15732479.2021.2015792.
Feng R, Chen PY, Wang FY, Xu Y, Zhu JH*. Fatigue life of C-FRCM strengthened corroded RC continuous beams under multi-intervention system. Composite Structures, Elsevier Science, 2022, Vol. 290, Article No. 115512.
Feng R, Zhang JZ, Li YW, Zhu JH*. Interface behaviour of carbon-fabric-reinforced cementitious matrix composites with ICCP technique. Magazine of Concrete Research, ICE Publishing, 2022, Vol. 74, No. 15, pp: 778-789.
Liu PP, Feng R*, Wang FY, Xu Y, Zhu JH. Fatigue testing of corroded RC continuous beams strengthened with polarized C-FRCM plate under ICCP-SS dual-function retrofitting system. Structures, Elsevier Science, 2022, Vol. 43, pp: 12-27.
Dang HY, Liang AR, Feng R*, Zhang JZ**, Yu X, Shao YB. Experimental study on mechanical properties and low-cycle fatigue behaviour of stainless steels subjected to salt spray and dry/wet cycle. International Journal of Fatigue, Elsevier Science, 2022, Vol. 165, Article No. 107187.
Feng R, Li YW, Zhu JH*. Numerical study and seismic design of corroded circular RC columns strengthened by C-FRCM. Magazine of Concrete Research, ICE Publishing, 2022, Vol. 74, No. 20, pp: 1065-1080.
Feng R, Liu PP, Zhang JZ, Wang FY, Xu Y, Zhu JH*. Bending behaviour of corroded RC continuous beams with C-FRCM strengthening system. Journal of Building Engineering, Elsevier Science, 2022, Vol. 60, Article No. 105229.
Dang HY, Liang AR, Feng R*, Zhang JZ**, Shao YB, Yam MCH. Experiments on static and fatigue behaviour of corroded Q235B and 42CrMo steels. Journal of Constructional Steel Research, Elsevier Science, 2022, Vol. 198, Article No. 107535.
Feng R, Tang JP, Quach WM*, Yan M, Zhao J. Experimental study on additive manufactured 304L stainless steel tubular sections: Material properties and cross-sectional behavior. Engineering Structures, Elsevier Science, 2022, Vol. 273, Article No. 115093.
Feng R, He XR, Wang FY, Zeng JJ, Zhu JH*. Experimental analysis of corroded RC continuous beams rehabilitated by ICCP-SS under unsymmetrical loading. Structures, Elsevier Science, 2022, Vol. 46, pp: 1171-1188.
著作
Finite Element Analysis and Design of Metal Structures, Ehab ELLOBODY & Ran FENG & Ben YOUNG, Butterworth-Heinemann Ltd, Elsevier, 2013.
高层钢结构住宅技术规程 (DB34/T 5001-2014)，安徽省住房和城乡建设厅&安徽省质量技术监督局联合发布，2014.
会议论文
Feng R, Young B. Tests of stainless steel RHS X-joints. Proceedings of the 11th International Symposium on Tubular Structures, pp: 269-276, Quebec City, Canada, 2006/8/31-2006/9/2.
Feng R, Young B. Tests of cold-formed stainless steel tubular T-joints. Proceedings of the 9th International Conference on Steel, Space & Composite Structures, pp: 277-284, Yantai & Beijing, China, 2007/10/11-2007/10/15.
Feng R, Young B. Tests of concrete-filled stainless steel tubular T-joints. Proceedings of the 3rd International Experts Seminar on Stainless Steel in Structures, The Steel Construction Institute, Ascot, UK, 2007/11/29-2007/11/30.
Feng R, Young B. Tests of T-joints in RHS and SHS high strength stainless steel tubes. Proceedings of the 5th International Conference on Advances in Steel Structures, pp: 571-578, Singapore, 2007/12/5-2007/12/7.
Lim JBP, Young B, Feng R. Ultimate bearing shear strength of cold-formed steel members using bolted connections at elevated temperatures. Proceedings of the 5th International Conference on Advances in Steel Structures, pp: 718-725, Singapore, 2007/12/5-2007/12/7.
Feng R, Young B. Investigation of concrete-filled stainless steel tubular X-joints. Proceedings of the 2nd International Civil Engineering Conference on Civil Engineering and Sustainable Development, pp: 87-96, Mombasa, Kenya, 2008/9/23-2008/9/25.
Feng R, Young B. Experimental investigation of cold-formed stainless steel tubular X-joints with chord preload. Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering & Construction, Extended abstract pp: 734-735 and full paper on CD, pp: 1-10, Taipei, Taiwan, 2008/11/19-2008/11/21.
Feng R, Young B. Design of cold-formed stainless steel tubular T-joints. Proceedings of the Regency Steel Asia International Symposium on Innovations in Structural Steel, pp: 203-223, Singapore, 2008/12/1.
Feng R, Young B. Design of concrete-filled stainless steel tubular connections. Proceedings of the 2nd International Symposium on Innovative Design of Steel Structures, pp: 101-130, Hong Kong, China, 2008/12/5.
Feng R, Young B. Numerical investigation of cold-formed stainless steel connections. Proceedings of the International Symposium on Global Developments in Steel Structures, pp: 85-109, Macao, China, 2008/12/6.
Feng R, Young B. Tests of concrete-filled stainless steel tubular X-joints. Proceedings of the 9th International Conference on Steel Concrete Composite and Hybrid Structures, pp: 605-612, Leeds, UK, 2009/7/8-2009/7/10.
Feng R, Young B. Finite element analysis of cold-formed stainless steel tubular T-joints at elevated temperatures. Proceedings of the 7th International Conference on Steel and Aluminium Structures, pp: 391-397, Kuching Sarawak, Malaysia, 2011/7/13-2011/7/15.
Feng R, Young B. Numerical investigation of cold-formed stainless steel tubular X-joints at elevated temperatures. Proceedings of the 6th International Conference on Thin Walled Structures (ICTWS2011), pp: 489-496, Timisoara, Romania, 2011/9/5-2011/9/7.
Feng R, Young B. Stress concentration factors of cold-formed stainless steel tubular X-joints. Proceedings of the 4th International Experts Seminar on Stainless Steel in Structures, pp: 1-29, Ascot, UK, 2012/12/6-2012/12/7.
冯然, 刘林林, 姜陆彬. 不锈钢圆管相贯T型节点数值分析. 中国钢结构协会结构稳定与疲劳分会第14届（ISSF-2014）学术交流会暨教学研讨会, pp: 249-255, 中国合肥, 2014/8/21-2014/8/24.
Feng R, Young B. Plastic mechanism study of cold-formed stainless steel tubular joints subjected to chord face failure. Proceedings of the 7th European Conference on Steel and Composite Structures, Extended abstract pp: 53-54 and full paper on CD, Napoli, Italy, 2014/9/10-2014/9/12.
冯然, 张长锐. 铝合金开孔柱轴压性能的数值分析. 第六届结构工程新进展国际论坛（IFASE2014）, pp: 431-439, 中国合肥, 2014/9/19-2014/9/21.
Feng R, Young B. Tests of aluminium stub columns with circular openings. Proceedings of the 7th International Conference on Thin-Walled Structures (ICTWS2014), Full paper on CD, pp: 1-7, Busan, Korea, 2014/9/28-2014/10/2.
Wan HY, Deng X, Feng R. A study of the short-term stiffness of concrete composite floor slabs with rebar truss in serviceability limit state. Proceedings of the 7th International Conference on Thin-Walled Structures (ICTWS2014), Full paper on CD, pp: 1-9, Busan, Korea, 2014/9/28-2014/10/2.
Hu YF, Qu H, Huo JS, Feng R. Numerical analysis on dynamic performance of tubular K-joint under impact loads. Proceedings of the 6th International Conference on Protection of Structures against Hazards, pp: 405-410, Tianjin, China, 2014/10/16-2014/10/17.
Feng R, Liu LL. Numerical study of stainless steel circular hollow section tubular T-joints. Proceedings of the 13th International Symposium on Structural Engineering (ISSE-13), pp: 754-762, Hefei, China, 2014/10/24-2014/10/27.
Feng R, Young B. Theoretical analysis of cold-formed stainless steel tubular joints subjected to chord side wall failure. Proceedings of the 8th International Conference on Advances in Steel Structures (ICASS 2015), Full paper on CD, pp: 1-10, Lisbon, Portugal, 2015/7/21-2015/7/24.
Wan HY, Feng R, Du WF. Pseudo-dynamic test on semi-rigid frame of concrete filled square steel tubular column-steel beam. Proceedings of the 8th International Conference on Advances in Steel Structures (ICASS 2015), Full paper on CD, pp: 1-9, Lisbon, Portugal, 2015/7/21-2015/7/24.
Wan HY, Zhu J, Feng R. Experimental study on behaviour of retrofitted square hollow section slender columns under axial compression. Proceedings of the 2nd International Conference on Performance-based and Life-cycle Structural Engineering (PLSE 2015), pp: 1583-1589, Brisbane, Australia, 2015/12/9-2015/12/11.
冯然, 孙雯. 高强钢工字型截面开孔梁试验研究. 中国钢结构协会结构稳定与疲劳分会第15届（ISSF-2016）学术交流会暨教学研讨会, 论文摘要, pp: 270, 中国昆明, 2016/8/18-2016/8/22.（优秀论文奖）
冯然, 沈成栋. 不锈钢结构抗震性能研究现状与工程应用. 第九届全国防震减灾工程学术研讨会（EDRE 2016）, pp: 482-490, 中国合肥, 2016/10/27-2016/10/29.
Wan HY, Feng R, Peng J. Experimental study on steel CHS slender columns strengthened by CFRP under axial compression. Proceedings of the 8th International Conference on Steel and Aluminium Structures (ICSAS 2016), Full paper on CD, pp: 1-11, Hong Kong, China, 2016/12/7-2016/12/9.
Wan HY, Feng R, Chen QR. Advances in the study of steel flexural members strengthened by CFRP. Proceedings of the 8th International Conference on Steel and Aluminium Structures (ICSAS 2016), Full paper on CD, pp: 1-9, Hong Kong, China, 2016/12/7-2016/12/9.
Wan HY, Feng R, Li TY. Influence of profiled steel sheet on the load-carrying capacity of concrete composite slabs with rebar truss. Proceedings of the 8th European Conference on Steel and Composite Structures (Eurosteel 2017), full paper on CD, pp: 1-10, Copenhagen, Denmark, 2017/9/13-2017/9/15.
Feng R, Liu YX. Tests of cold-formed stainless steel CHS-to-SHS hybrid tubular joints. Proceedings of the 17th International Symposium on Tubular Structures, pp: 269-276, Singapore, 2019/12/09-2019/12/12.
发表演说
11th International Symposium on Tubular Structures, Tests of Stainless Steel RHS X-Joints, Quebec City, Canada, 2006/8/31-2006/9/2.
9th International Conference on Steel, Space & Composite Structures, Tests of Cold-Formed Stainless Steel Tubular T-Joints, Yantai & Beijing, China, 2007/10/11-2007/10/15.
5th International Conference on Advances in Steel Structures, Tests of T-Joints in RHS and SHS High Strength Stainless Steel Tubes, Singapore, 2007/12/5-2007/12/7.
Seminar on Steel Structures, Design of Cold-Formed Stainless Steel Tubular Joints, Shenzhen University, China, 2009/10/15.
7th International Conference on Steel and Aluminium Structures, Finite Element Analysis of Cold-Formed Stainless Steel Tubular T-Joints at Elevated Temperatures, Kuching Sarawak, Malaysia, 2011/7/13-2011/7/15.
6th International Conference on Thin Walled Structures, Numerical Investigation of Cold-Formed Stainless Steel Tubular X-Joints at Elevated Temperatures, Timisoara, Romania, 2011/9/5-2011/9/7.
4th International Experts Seminar on Stainless Steel in Structures, Stress Concentration Factors of Cold-Formed Stainless Steel Tubular X-Joints, Ascot, UK, 2012/12/6-2012/12/7.
安徽省钢结构协会第二届二次会员代表大会暨技术交流会，不锈钢在建筑结构中的应用与研究，安徽马鞍山，2014/5/17-2014/5/18.
中国钢结构协会结构稳定与疲劳分会第14届（ISSF-2014）学术交流会暨教学研讨会，不锈钢桁架相贯节点应力集中性能研究，安徽合肥，2014/8/21-2014/8/24.
7th European Conference on Steel and Composite Structures, Plastic Mechanism Study of Cold-Formed Stainless Steel Tubular Joints subjected to Chord Face Failure, Napoli, Italy, 2014/9/10-2014/9/12.
7th International Conference on Thin-Walled Structures, Tests of Aluminium Stub Columns with Circular Openings, Busan, Korea, 2014/9/28-2014/10/2.
安徽省钢结构协会第二届三次会员代表大会暨技术交流会，铝合金在建筑结构中的应用与研究，安徽合肥，2015/5/23-2015/5/24.
8th International Conference on Advances in Steel Structures, Theoretical Analysis of Cold-Formed Stainless Steel Tubular Joints subjected to Chord Side Wall Failure, Lisbon, Portugal, 2015/7/21-2015/7/24.
第一届全国不锈钢结构技术研讨及《不锈钢结构技术规程》应用交流会，不锈钢焊接相贯方管节点应力集中系数试验研究，江苏南京，2016/6/25.
4th International Conference on Service Life Design for Infrastructures & International Symposium on Concrete Modelling, Flexural Behavior of Corroded Reinforced Concrete Continuous Beams Repaired by ICCP-SS, Delft, Netherlands, 2018/8/26-2018/8/29.
第二届全国不锈钢结构技术研讨会，不锈钢焊接相贯杂交管节点力学性能研究，江苏南京，2018/12/15.
17th International Symposium on Tubular Structures, Tests of cold-formed stainless steel CHS-to-SHS hybrid tubular joints, Singapore, 2019/12/09-2019/12/12.
4th International Workshop on Seawater Sea-Sand Concrete (SSC) Structures Reinforced with FRP Composites, Flexural Behaviour of C-FRCM Strengthened Corroded RC Continuous Beams, Online, 2021/1/9-2021/1/10.
中国建筑金属结构协会检测鉴定加固改造分会第一届全国学术研讨与技术交流会,C-FRCM加固腐蚀钢筋混凝土连续梁弯曲性能研究,安徽合肥,2022/7/22-2022/7/24.
第三届全国冷弯型钢结构学术会议,不锈钢焊接相贯杂交K型节点静力性能研究,安徽合肥,2022/8/21-2022/8/23.
第一届水泥基材料低碳技术与装备高峰论坛,ICCP-SS双重修复体系下腐蚀钢筋混凝土梁力学性能研究,线上会议,2022/12/23.
4th Asian Concrete Federation Symposium on Emerging Technologies for Structural Longevity, Bending Tests of Corroded RC Continuous Beams Strengthened with ICCP-SS Dual-Function Retrofitting System, Shenzhen, China, 2023/3/11-2023/3/13.
京公网安备 11010802027423号