近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Huizhu Yang, Zehui Wang, Mingxuan Li, Fengsheng Ren, Binjian Ma*, Numerical Study on Cross-Linked Cold Plate Design for Thermal Management of High-Power Lithium-Ion Battery, Batteries, 2023, 9(4): 220. (JCR 一区， IF 5.938)
Zehui Wang, Mingxuan Li, Fengshen Ren, Binjian Ma, Huizhu Yang*, Yonggang Zhu, Sobol sensitivity analysis and multi-objective optimization of manifold microchannel heat sink considering entropy generation minimization. International Journal of Heat and Mass Transfer, 2023, 208: 124046. (JCR 一区， IF 5.431)
Huizhu Yang, Mingxuan Li, Zehui Wang, Binjian Ma *, A compact and lightweight hybrid liquid cooling system coupling with Z-type cold plates and PCM composite for battery thermal management, Energy, 2023, 263: 126026. (JCR 一区， IF 8.857)
Huizhu Yang, Yue Yang, Binjian Ma, Yonggang Zhu*, Experimental Study on Capillary Microflows in High Porosity Open-Cell Metal Foams, Micromachines, 2022, 13(12), 2052. (JCR 二区， IF 3.523)
Binjian Ma, Dafeng Li, Huizhu Yang*, Analytical and numerical study of capillary rise in sinusoidal wavy channel: Unveilling the role of interfacial wobbling. Physics of Fluids, 2022, 34(5): 052114. (JCR 一区， IF 4.980)
Huizhu Yang？, Yongyao Li, Liang Zhang, Yonggang Zhu, Thermal performance enhancement of phase change material heat sinks for thermal management of electronic devices under constant and intermittent power loads, International Journal of Heat and Mass Transfer, 2021, 181: 121899. (JCR 一区， IF 5.431)
Huizhu Yang*, Yongyao Li, Binjian Ma, Yonggang Zhu, Review and a Theoretical Approach on Pressure Drop Correlations of Flow through Open-Cell Metal Foam, Materials, 2021, 14(12): 3153. (JCR 一区， IF 3.623)
Huizhu Yang, Yongyao Li, Yue Yang, Dong Chen, Yonggang Zhu*, Effective thermal conductivity of high porosity open-cell metal foams, International Journal of Heat and Mass Transfer, 2020, 147: 118974. (JCR一区Top，IF 4.947)
Huizhu Yang, Yongyao Li, Yue Yang, Yonggang Zhu*, Jian Wen*, Effect of surface efficiency on the thermal design of plate-fin heat exchangers with passages stack arrangement, International Journal of Heat and Mass Transfer, 2019, 143: 118494. (JCR一区Top，IF 4.947)
Ke Li1, Jian Wen, Huizhu Yang1, Simin Wang*, Yanzhong Li, Sensitivity and stress analysis of serrated fin structure in plate-fin heat exchanger on cryogenic condition, International Journal of Thermal Sciences, 2019, 145: 106013 (JCR一区，IF 3.476)
Huizhu Yang, Jian Wen, Simin Wang*, Yanzhong Li, Effect of Fin Types and Prandtl Number on Performance of Plate-fin Heat Exchanger: Experimental and Numerical Assessment, Applied Thermal Engineering, 2018, 144: 726–735. (JCR一区Top，IF 4.725)
Huizhu Yang, Jian Wen, Simin Wang*, Yanzhong Li, Thermal design and optimization of plate-fin heat exchangers based global sensitivity analysis and NSGA-II, Applied Thermal Engineering, 2018, 136: 444-453. (JCR一区Top，IF 4.725)
Huizhu Yang, Jian Wen, Simin Wang*, Yanzhong Li, Wenjian Cai, Sobol sensitivity analysis for governing variables in design of a plate-fin heat exchanger with serrated fins, International Journal of Heat and Mass Transfer, 2017,115: 871-881. (JCR一区Top，IF 4.947)
Huizhu Yang, Jian Wen, Xin Gu, Yuce Liu, Simin Wang*, Wenjian Cai, Yanzhong Li, A Mathematical Model for Flow Maldistribution Study in a Parallel Plate-fin Heat Exchanger, Applied Thermal Engineering, 2017,121:462-472. (JCR一区Top，IF 4.725)
Huizhu Yang, Jian Wen, Xin Gu, Ke Li, Simin Wang*, Yanzhong Li. Improvements on Flow Maldistribution and Heat Transfer Performance of Plate-fin Heat Exchangers by Qusai-S Header Configuration, Heat Transfer Engineering, 2017, 38: 1547-1560. (JCR三区，IF 1.693)
Huizhu Yang, Jian Wen, Xin Tong, Ke Li, Simin Wang*, Yanzhong Li. Numerical Investigation on Configuration Improvement of a Plate-fin Heat Exchanger With Perforated Wing-Panel Header, Journal of Enhanced Heat Transfer, 2016, 23: 1-21. (JCR四区，IF 1.406)
Jian Wen, Huizhu Yang, Simin Wang*, PIV Experimental Investigation of Shell-side Flow Patterns in Shell and Tube Heat Exchanger with Different Helical Baffles, International Journal of Heat and Mass Transfer, 2017, 104: 247-259. (JCR一区Top，IF 4.947)
Jian Wen, Huizhu Yang, Guanping Jian, Xin Tong, Ke Li, Simin Wang*. Energy and Cost Optimization of Shell and Tube Heat Exchanger with Helical Baffles Using Kriging Metamodel Based on MOGA, International Journal of Heat and Mass Transfer, 2016, 98: 29-39. (JCR一区Top，IF 4.947)
Jian Wen, Huizhu Yang, Xin Tong, Ke Li, Simin Wang*, Yanzhong Li. Configuration Parameters Design and Optimization for Plate-fin Heat Exchangers with Serrated Fin by Multi-objective Genetic Algorithm, Energy Conversion and Management, 2016, 117: 482-489. (JCR一区Top，IF 8.208)
Jian Wen, Huizhu Yang, Xin Tong, Ke Li, Simin Wang*, Yanzhong Li. Optimization investigation on configuration parameters of serrated fin in plate-fin heat exchanger using genetic algorithm, International Journal of Thermal Sciences, 2016, 101: 116-125. (JCR一区，IF 3.476) 2017 ESI 1%高被引论文
Jian Wen, Huizhu Yang, Simin Wang*, Shifeng Xu, Yulan Xue, Hanfei Tuo. Numerical investigation on baffle configuration improvement of the heat exchanger with helical baffles, Energy Conversion and Management, 2015, 89: 438-448. (JCR一区Top，IF 8.2083) 2016 ESI 3%拓展版高被引论文
Jian Wen, Huizhu Yang, Simin Wang, Yulan Xue, Xin Tong. Experimental investigation on performance comparison for shell-and-tube heat exchangers with different baffles, International Journal of Heat and Mass Transfer, 2015, 84: 990-997. (JCR一区Top，IF 4.947)
Simin Wang, Jian Wen*, Huizhu Yang, Yulan Xue, Hanfei Tuo. Experimental investigation on heat transfer enhancement of a heat exchanger with helical baffles through blockage of triangle leakage zones, Applied Thermal Engineering, 2014, 67: 122-130. (JCR一区Top，IF 4.725)
Zhe Wang*, Wenjian Cai*, Wei Hong, Suping Shen, Huizhu Yang, Fenghui Han, Multi-objective optimization design and performance evaluation of a novel multi-stream intermediate fluid vaporizer with cold energy recovery, Energy Conversion and Management, 2019, 195: 32–42. (JCR一区Top，IF 8.208)
Simin Wang, Jian Wen*, Yamei Li, Huizhu Yang, Yanzhong Li, Jiyuan Tu. Numerical Prediction for Subcooled Boiling Flow of Liquid Nitrogen in a Vertical Tube with MUSIG Model, Chinese Journal of Chemical Engineering, 2013, 21(11): 1195-1205. (JCR三区，IF 2.627)
杨辉著, 文键, 童欣, 李科, 厉彦忠, 王斯民*. 板翅式换热器锯齿翅片参数的遗传算法优化研究. 西安交通大学学报. 2015, 12: 90-96.
文键, 杨辉著, 薛玉兰, 童欣, 王斯民*. 旋梯式螺旋折流板换热器换热性能的实验研究. 高校化学工程学报. 2015, 4: 795-801.
文键, 杨辉著, 王斯民*, 薛玉兰, 杜冬冬. 旋梯式螺旋折流板换热器优化结构的数值模拟. 西安交通大学学报. 2014,11: 8-14.
文键, 杨辉著, 杜冬冬, 薛玉兰, 王萌萌, 王斯民*. 螺旋折流板换热器换热强化的数值研究. 西安交通大学学报. 2014, 9: 43-48. 2016年西安交通大学学报优秀学术论文
文键, 童欣, 杨辉著, 王斯民*, 厉彦忠. 垫条对缠绕管换热器壳侧性能的影响研究. 西安交通大学学报. 2016, 50(11): 14-20.
杨辉著, 文键, 王斯民*. 螺旋折流板换热器的熵产分析. 化学工程. 2014, 11：45-50.
学术会议
Huizhu Yang, Liang Zhang, Weifeng Wei, Yongyao Li, Chuanwen Lv, Yonggang Zhu*, Experimental investigation on pressure drop characteristics of flow through high porosity open-cell metal foam , ICMFLOC2021, Shenzhen, China
Huizhu Yang, Jian Wen, Xin Tong, Simin Wang, Yanzhong Li, Numerical investigation on header configuration improvement of plate-fin heat exchanger, ICCR2015-91，Xi’an, China.
Huizhu Yang, Jian Wen, Simin Wang, Yulan Xue, Mengmeng Wang, Numerical simulation on heat transfer enhancement of the heat exchanger with helical baffles, IMECE2014-37704, Montreal, Canada.
杨辉著, 黎永耀, 朱永刚. 泡沫金属有效导热系数的数学模型, 2019 中国制冷学会学术年会, 厦门, 2019-11-12.
杨辉著, 黎永耀, 朱永刚, 文键, 厉彦忠. 复叠式板翅式换热器热力设计与翅片效率计算分析, 第十四届全国低温工程大会, 昆明, 2019-10-14.
杨辉著, 文键, 厉彦忠. 物流分布不均匀性对板翅式换热器性能影响的数学模型, 第十三届全国低温工程大会, 东莞, 2017-11-1.
杨辉著, 文键, 童欣, 王斯民, 厉彦忠. 结合Kriging相应面的遗传算法在板翅式换热器的优化研究, 第十二届全国低温工程大会, 南京, 2015-8-20.
杨辉著, 文键, 王斯民, 薛玉兰, 厉彦忠. 新型螺旋折流板换热器数值研究, 2014工程热物理年会, 西安, 2014-11-1.
京公网安备 11010802027423号