近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Tian, J., Liu, M.（通讯作者）, Xiao, H., Zhang, Z., Long, Z., Leung, C.M. 2023. Optimized Ultrasonic Total Focusing Imaging of Diverse and Multiple Defects in Crossply CFRP: Floquet Wave Theory, Numerical Simulation, and Experimental Validation. Mechanical Systems and Signal Processing. 199: 110486.
Wang, Q., Tian, Y., A Duongthipthewa, J Zhang, M Liu（通讯作者）, Z Su, L Zhou 2023 An embedded non-intrusive graphene/epoxy broadband nanocomposite sensor co-cured with GFRP for in situ structural health monitoring Composites Science and Technology 236, 109995
Liu, M., Li, Z., Wang, S., Zhang, Z., Leung, C.M. 2023. Quantitative Characterization of Out-of-plane Fiber Wrinkling in Thick CFRP with Double-side Inverse-variance Weight-synthetic Ultrasonic Imaging. Composites Part A: Applied Science and Manufacturing. 166:107376. (1区 IF=9.463)
Liu, M.（通讯作者）, Zhang, Y., Li, L., Chen, G., Cui, F. 2022. Reconstruction of Composite Stiffness Matrix with Array Guided Wave-based Genetic Algorithm. Materials 2022, 15(24), 8715. (2区 IF= 3.748)
Liu, M.,（通讯作者） Xiao H., Hu Q., Zhang Z,, Leung C.M. 2021. Floquet wave theory-based time-corrected ultrasonic total focusing method for fiber-reinforced composite laminate. Ultrasonics 116: 106467. (1区 IF=4.062)
Liu, M.（通讯作者）, Li, L., Zhang, Y., Chen, G., Cui, F. 2022. Dispersion of Guided Waves in Complex Waveguides: A Hybrid Modeling Technique Combining Gauss–Lobatto–Legendre Node Collation and Semi-Analytical Finite Element Method. International Journal of Applied Mechanics 22(3): 2250085. (2区 IF=3.951)
Tian, Y, Wang, Q., Liu, M. (通讯作者), Zhang, J., Zhou, L. 2023. Robust and quantitative characterization of aircraft icing with mode and frequency selective ultrasonic guided wave. Ultrasonics 127: 106846. （1区）
Wang, K., Liu, M. (通讯作者), Su, Z., Guo, S., Cui, F. 2021. Mode-mismatching enhanced disbond detection using material nonlinearity in guided waves at low frequency. Journal of Sound and Vibration, 490: 115733. (2021 JCR Q1 影响因子 4.761)
Zhang, Z., Liu, M.(通讯作者), Li, Q., Ang, Y. 2020. Visualized characterization of diversified defects in thick aerospace composites using ultrasonic B-scan.Composites Communications, 22: 100435. (2019 JCR Q2 影响因子 4.915) (1区，top)
Zhang, Z., Guo, S., Li, Q., Cui, F., Malcolm, A. A., Su, Z., & Liu, M. (通讯作者) 2020. Ultrasonic detection and characterization of delamination and rich resin in thick composites with waviness. Composites Science and Technology, 189: 108016. (2019 JCR Q1 影响因子 7.094) (1区，top)
Liu, M., Chen, S., Wong, Z. Z., Yao, K., & Cui, F. (2020). In situ Disbond Detection in Adhesive Bonded Multi-layer Metallic Joint Using Time-of-Flight Variation of Guided Wave. Ultrasonics, 102: 106062. (2019 JCR Q1 影响因子 3.065)
Wang, K., Liu, M. (通讯作者), Cao, W., Yang, W., Su, Z.. and Cui, F. 2019. Detection and sizing of disbond in multilayer bonded structure using modally selective guided wave. Structural Health Monitoring: An International Journal (2019 JCR Q1 影响因子 4.870)
Liu, M. (通讯作者), Wang, Q., Zhang, Q., Long, R., et. al. 2019. Quantitative, in situ, and online characterization of hypervelocity impact induced damage based on shock acoustic emission waves. Chinese Journal of Aeronautics, 32(5): p. 1059-1070. (2019 JCR Q1 影响因子 2.215)
Liu, M., Wang, Q., Zhang, Q., Long, R., et. al. 2018. Characterizing hypervelocity (> 2.5 km/s)-impact-engendered damage in shielding structures using in-situ acoustic emission: simulation and experiment. International Journal of Impact Engineering, 111: p. 273-284. (2019 JCR Q1 影响因子 3.642)
Liu, M. (通讯作者), Schmicker, D., Su, Z. & Cui, F. 2018. A Benchmark Study of Modeling Lamb Wave Scattering by a Through Hole Using a Time-domain Spectral Element Method. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems. 1(2): 021006. (美国机械工程学会ASME 2018年新期刊)
Zeng, Z., Liu, M. (共同一作), Xu, H., Liao, Y., et. al. 2017. Ultra-broadband Frequency Responsive Sensor based on Lightweight and Flexible Carbon Nanostructured Polymeric Nanocomposites. Carbon, 121: p. 490-501. (2018 JCR Q1 影响因子 7.082)
Liu, M., Wang, K., Lissenden, C.J. 2017, Characterizing Hypervelocity Impact (HVI)-induced Pitting Damage Using Active Guided Ultrasonic Waves: from Linear to Nonlinear. Materials. 10(5): 547. (2018 JCR Q2 影响因子 2.972)
Liu, M., Zeng, Z., Xu, H., Liao, Y., et al. 2017, Applications of a nanocomposite-inspired in-situ broadband ultrasonic sensor to acousto-ultrasonics-based passive and active structural health monitoring. Ultrasonics, 78: p. 166-174. (2018 JCR Q2 影响因子 2.598)
Liu, M., Su, Z, Zhang, Q. and Long R. 2016. Modeling hypervelocity-impact-induced shock waves for characterizing orbital debris-produced damage. ASME Journal of Applied Mechanics, 83: 081010. (2018 JCR Q2 影响因子 2.127)
Zeng, Z., Liu, M. (共同一作),, Xu, H., Liu W., et al. 2016. A coatable, light-weight, fast-response nanocomposite sensor for the in situ acquisition of dynamic elastic disturbance: from structural vibration to ultrasonic waves. Smart Materials and Structures, 25: 065005. (2018 JCR Q1 影响因子 2.963)
Wei Z., Liu H., Wang L., Zhen H., Liu M., Liu Z. (2023) Coupling transport effects of H2 and CO2 on the thermochemical characteristics of biogas-hydrogen opposed diffusion flame. Fuel. 335, 127119.
Liu, Q., Li, Y., Guan, R., Yan, J., Liu, M., Luo, G., ... & Wang, K. (2022). Advancing measurement of zero-group-velocity Lamb waves using PVDF-TrFE transducers: first data and application to in situ health monitoring of multilayer bonded structures. Structural Health Monitoring, 14759217221126812.
Zhang, Z., Li, Q., Cao, A., Yeoh, W., Liu, M., & Yang, W. (2022). Defect identification in thick porous and wavy composites with hybrid use of ultrasound non-reciprocity and scattering. Composites Science and Technology, 225, 109514.2022
Wang, S., Kang, W., Yang, W., Zhang, Z., Li, Q., Liu, M., & Wang, X. (2022). Hygrothermal effects on buckling behaviors of porous bi-directional functionally graded micro-/nanobeams using two-phase local/nonlocal strain gradient theory. European Journal of Mechanics-A/Solids, 94, 104554.
Zhang, Z., Li, Q., Liu, M., Yang, W., & Ang, Y. (2022). Through transmission ultrasonic inspection of fiber waviness for thickness-tapered composites using ultrasound non-reciprocity: Simulation and experiment. Ultrasonics, 123, 106716.
Yang, W., Liu, M., Ying, L., & Wang, X. (2022). Coupled effects of surface interaction and damping on electromechanical stability of functionally graded nanotubes reinforced torsional micromirror actuator. The Journal of Strain Analysis for Engineering Design, 57(5), 360-376.
Wong, V. K., Hu, Y., Tham, Z. W., Chen, Y. F., Liu, M., Lim, K. E., ... & Zhang, L. (2022). Measurement of Elastic Constant Matrix of Carbon Fiber Composites With an Ultrasonic 2D-Array Transducer. IEEE Sensors Journal, 22(6), 5562-5570.
Wong, V. K., Liu, M., Goh, W. P., Chen, S., Zheng Wong, Z., Cui, F., & Yao, K. (2022). Structural health monitoring of fastener hole using ring-design direct-write piezoelectric ultrasonic transducer. Structural Health Monitoring, 14759217211073950.
Song. P., Wei Z., Chen H., Liu, M., Ren J. (2022). Effects of pre-whirl and blade profile on the hydraulic and cavitation performance of a centrifugal pump. Internatiaon Journal of Multiphase Flow. 157, 104261.
Yang, W., Ding, W., Liu, M., Yang, J., & Li, M. (2021). A theoretical model of a flexible capacitive pressure sensor with microstructured electrodes for highly sensitive electronic skin. Journal of Physics D: Applied Physics, 55(9), 094001.
Zhang, Z., Liu, M., Li, Q., Png, M. 2020. Baseline-free defect evaluation of complex-microstructure composites using frequency-dependent ultrasound reflections. Composites Part A: Applied Science and Manufacturing. 139: 106090. (2019 JCR Q1 影响因子 6.444)
Cao, W., Wang, K., Zhou, P., Yang, X., Xu, L., Liu, M., Fromme, P., Pang, B., Chi, R., Su, Z. 2020.Nonlinear ultrasonic evaluation of disorderedly clustered pitting damage using an in situ sensor network. Structural Health Monitoring, 19(6): p.1989-2006. (2019 JCR Q1 影响因子 4.870)
Wang, K., Cao, W., Liu, M., Li, Y., Zhou, P., Su, Z. 2020. Advancing elastic wave imaging using thermal susceptibility of acoustic nonlinearity. International Journal of Mechanical Sciences, 175: 105509. (2019 JCR Q1 影响因子 4.631)
Wong, Z.Z., Chen, S., Liu, M., Lim, S.H., Cui, F., Yao, K. 2020. Piezoelectricity in Structural Adhesives and Application for Monitoring Joint Integrity via Guided Ultrasonic Waves. IEEE transactions on ultrasonics, ferroelectrics, and frequency control. Early Access. (2019 JCR Q1 影响因子 2.812)
Liao, Y., Duan, F., Zhang, H., Lu, Y., Zeng, Z., Liu, M., ... & Zhang, Z. (2019). Ultrafast response of spray-on nanocomposite piezoresistive sensors to broadband ultrasound. Carbon, 143, p. 743-751. (2018 JCR Q1 影响因子 7.082)
Liu, H., Liu, M., Zhang, L., Chen, Y., et. al.. 2018. Directed Acoustic Shearography for Crack Detection around Fastener Holes in Aluminum Plates. NDT & E International, 100: p. 124-131.. (2018 JCR Q1, 影响因子 2.781)
Zhang, Z., Liu, M., Liao, Y., Su, Z., & Xiao, Y. 2018. Contact acoustic nonlinearity (CAN)-based continuous monitoring of bolt loosening: Hybrid use of high-order harmonics and spectral sidebands. Mechanical Systems and Signal Processing, 103: p. 280-294. (2018 JCR Q1 影响因子 4.370)
Wang, K., Liu, M., Su, Z., Yuan, S, et. al, 2018. Analytical Insight into “Breathing” Crack-induced Acoustic Nonlinearity with An Application to Quantitative Evaluation of Contact Cracks. Ultrasonics, 88: p. 157-167. (2018 JCR Q2 影响因子 2.127)
Xu, H., Zeng, Z., Wu, Z., Zhou, L., Su, Z., Liao, Y., Liu, M. 2017, Broadband dynamic responses of flexible carbon black/poly (vinylidene Fluoride) nanocomposites: a sensitivity study. Composites Science and Technology, 149: p. 246-253. (2019 JCR Q1 影响因子 7.094)
Zhang Z., Liu, M., Su, Z., Xiao, Y. 2016. Quantitative evaluation of residual torque of a loose bolt based on wave energy dissipation and vibro-acoustic modulation: A comparative study. Journal of Sound and Vibration, 383: p. 156-170. (2018 JCR Q1 影响因子 2.618)
Qiu, L., Liu, M., Qing X., Yuan S. 2013. A quantitative multi-damage monitoring method for large-scale complex composite. Structural Health Monitoring, 12(3): p. 183-196. (2018 JCR Q1 影响因子 4.870)
Liang, D., Yuan, S., Liu, M. 2013. Distributed coordination algorithm for impact location of preciseness and real-time on composite structures. Measurement 46 (1): p. 527-536. (2018 JCR Q2 影响因子 2.218)
Yuan, S., Wang, Z., Qiu, L., Wang, Y., Liu, M. 2013. A multi-radio sink node designed for wireless SHM applications. Smart Structures and Systems 11(3): p. 261-282. (2018 JCR Q1 影响因子 2.231)
Yuan, S., Liang, D., Qiu, L., Liu, M. 2012. Mobile multi-agent evaluation method for wireless sensor networks-based large-scale structural health monitoring. International Journal of Distributed Sensor Networks 8 (11), 164527. (2018 JCR Q2 影响因子 1.787)
会议论文及发表演说
Liu, M. & Cui, F. 2019. Guided wave-based in situ disbond detection with embedded flexible piezoelectric wafer, 10th International Conference on Computational Methods. 9-13, July, 2019, Singapore. （主题口头报告）
Liu, M., Wang, K., Su, Z. & Cui, F. 2019. Interrogation of Lamb Wave Interaction with Disbond in Adhesively Bonded Joint, 7th Asia-Pacific Workshop on Structural Health Monitoring 2018, Hong Kong, China. （口头报告）
Liu, M. & Cui, F. 2017. Interrogation of Lamb Wave Interaction with Disbond in Adhesively Bonded Joint. 2017 International Congress on Ultrasonics. 18-20, December, 2017, Honolulu Hawaii, USA. （提交全文并口头报告）
Liu, M., Su, Z. & Cui, F. 2017. Localization of Hypervelocity Impact to Spacecraft using Shock Acoustic Emission Waves: Experiment and Simulation Study. The 9th International Symposium on NDT in Aerospace, 8-10, November, 2017, Xiamen, China. （提交全文并口头报告）
Liu, M., Schmicker, D., Su, Z. & Cui, F. 2017. Time Domain Spectral Element Method for Simulation of Guided Wave: Analysis of Calculation Accuracy and Efficiency. The 46th International Congress and Exposition on Noise Control Engineering. 27-30, August, 2017, Hong Kong, China. （提交全文并口头报告）
Liu, M., Lissenden, C.J., Wang, Q., Su, Z., Zhang, Q., Long, R. & Cui, F. 2017. ‘Interrogation of linear/nonlinear features of guided waves for characterizing hypervelocity impact-induced pitting damage in shielding structures’, in Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring (IWSHM-11), edited by Chang, F.-K. and Kopsaftopoulos, F., Lancaster: DEStech Publications, Inc., ISBN: 978-1-60595-330-4, pp. 1819-1826, 12-14, September, 2017, Stanford, CA., USA. （提交全文）
Liu, M., Lissenden C.J., Wang, Q., Su, Z. et al. 2016. Characterization of damage in shielding structures of space vehicles under hypervelocity impact, in Proceeding of the 6th Asia Pacific Workshop on Structural Health Monitoring, 7-9, December, 2016, Hobart, Australia. （提交全文并口头报告）
Liu, M., Zeng, Z., Xu, H., Su, Z. et al. 2016. A coatable, lightweight nanocomposite sensor for in-situ acquisition of ultrasonic waves and its application to embeddable structural health monitoring, in Proceedings of the 8th European Workshop on Structural Health Monitoring (EWSHM-8), edited by Güemes, A., Aranguren, G., and Martinez, F., 5-8, July, 2016, Bilbao, Spain. （提交全文）
Liu, M., Su, Z., Zhang, Q. & Long, R. 2015. Modeling on propagation of shock waves induced by hypervelocity impact (HVI) with application to evaluation of HVI damage. Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring (IWSHM-10), edited by Chang, F.-K. and Kopsaftopoulos, F., Lancaster: DEStech Publications, Inc., ISBN: 978-1-60595-111-9, pp. 1540-1547, 1-3, September, 2015, Stanford, CA., USA. （提交全文）
Liu, M., Su, Z. 2015. On propagation of shock waves generated under hypervelocity impact (HVI) and application to characterizing orbital debris-induced damage in space vehicles. Proc. SPIE 9438, Health Monitoring of Structural and Biological Systems 2015, 94381R, March 23, 2015, San Diego, CA, USA. （提交全文并口头报告）
Liu, M., Su, Z. & Yuan, S. 2014. ‘On propagation characteristics of shock waves generated under hypervelocity impact’, in Proceedings of the 2nd International Conference on Structural Health Monitoring and Integrity Management (ICSHMIM-2014), edited by Ding, K., Yuan, S. and Wu, Z., Taylor & Francis Group, 24-26, September, 2014, Nanjing, P. R. China. （提交全文并口头报告）
Zhang, Z., Liu, M., Su, Z., & Xiao, Y. 2016. Continuous Monitoring of Residual Torque of Loose Bolt in A Bolted Joint, in Proceeding of the 6th Asia Pacific Workshop on Structural Health Monitoring, 7-9, December, 2016, Hobart, Australia. （提交全文并口头报告）
Zhang, Z., Liu, M., Su, Z. & Xiao, Y. 2016. ‘Evaluation of bolt loosening using a hybrid approach based on contact acoustic nonlinearity’, in Proceedings of the 19th World Conference on Non-destructive Testing (WCNDT-2016), German Society for Non-Destructive Testing (DGZfP), ISBN: 978-3-940283-78-8, 13-17, June, 2016, Munich, Germany. （提交全文）
Li, W., Liu, W., Zhou, L.-M., Zhang, H., Lu, Y., Su, Z., Hong, M., Liu, M., Xu, H. & Lu, B. 2015. ‘A coated carbon nanotube sensor network for in-situ active sensing of ultrasonic elastic waves’, in Proceedings of CANSMART/SMN 2015 - International Conference on Smart Materials, Structures and Nanotechnology, edited by Akhras, G., ISBN: 978-0-9813815-2-7, pp. 127-136, 15-17, July, 2015, Vancouver, Canada. （提交全文）
京公网安备 11010802027423号