当前位置: X-MOL首页全球导师 国内导师 › 孙宝芝

个人简介

奖励 1.获黑龙江省自然科学一等奖1项、国防科技进步三等奖1项; 2.作为核心成员荣获《传热学》校级精品课; 3.获得哈尔滨工程大学优秀主讲教师二等奖一次,三等奖若干次; 4.获得哈尔滨工程大学优秀硕士生导师; 5.获得哈尔滨工程大学学士学位论文优秀指导教师。

研究领域

主要从事汽液两相流动与传热机理及数值模拟、船舶能源控制与管理、换热器换热性能仿真及性能分析、大型蒸汽动力系统仿真及性能研究等有关传热传质方面的研究工作。 

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

[1] Jianxin Shi, Baozhi Sun*, Guolei Zhang, Fuyuan Song, Longbin Yang. Prediction of dryout and post-dryout wall temperature at different operating parameters for once-through steam generators, International Journal of Heat and Mass Transfer, 2016, 103:66–76 (SCI,一区). [2] Baozhi Sun, Jiamin Guo, Yu Lei, Longbin Yang, Yanjun Li, Guolei Zhang. Simulation and verification of a non-equilibrium thermodynamic model for a steam catapult’s steam accumulator, International Journal of Heat and Mass Transfer, 2015,85: 88-97(SCI,一区). [3] *Baozhi Sun, Yuanlong Yang. Numerically investigating the influence of tube support plates on thermal-hydraulic characteristics in a steam generator, Applied Thermal Engineering,51, 611-622,2013 (SCI,一区). [4] Baozhi Sun, Lusong Zheng, Longbin Yang, Yanjun Li, Jianxin Shi, Shanghua Liu, Hongliang Qi. A coupled stress analysis of the steam generator tube considering the influence of the fluid flow and heat transfer in the primary and secondary sides, Applied Thermal Engineering, 2015,87:803-815(SCI,一区). [5] Jianxin Shi, Baozhi Sun*, Wenjing Han, Guolei Zhang, Yanjun Li, Longbin Yang. Numerical simulation of dryout and post-dryout heat transfer in a straight-pipe once-through steam generator, Applied Thermal Engineering, 2016,105: 400-410(SCI,一区). [6] Baozhi Sun*, Jianxin Shi, Liu Yang, LongbinYang*, Yanjun Li, Shanghua Liu. Modeling the thermal stress of heat transfer tubes with tube support plate gaps in a steam generator, Annals of Nuclear Energy, 2016,87: 400-410(SCI,二区). [7] Yanjun Li, Yuanlong Yang, *Baozhi Sun. Numerical investigation of thermal-hydraulic characteristics in a steam generator using a coupled primary and secondary side heat transfer model, Annals of Nuclear Energy,55,258-264,2013 (SCI,二区). [8] Guolei Zhang, Yu Zhang, Yuanlong Yang, Yanjun Li, *Baozhi Sun. Dynamic heat transfer performance study of steam generator based on distributed parameter method, Annals of Nuclear Energy,63,658-664,2014 (SCI,二区). [9] Yuanlong Yang, *Baozhi Sun, Yanjun Li. Computational fluid dynamics investigation of thermal–hydraulic characteristics for a steam generator with and without tube support plates,Proceeding of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 227(12), 2897-2911, 2013, (SCI,三区). [10]Baozhi Sun, Xiulan Huai, Renqiu Jiang, Dengying Liu. A research of increasing mass transfer rates during osmotic dehydration using acoustic cavitation, Chinese Journal of Chemical Engineering,13(1),13-17,2005 (SCI). [11]杨元龙,孙宝芝,杨龙滨. 蒸汽发生器二次侧汽液两相流数值模拟,原子能科学技术,46(1), 51-56,2012 (EI). [12]张羽,孙宝芝,张国磊. 蒸汽发生器一维均相流模型及其换热性能研究,原子能科学技术,46(1), 57-62,2012 (EI). [13]杨元龙,孙宝芝,杨柳,郑陆松. 基于群体平衡原理的蒸汽发生器汽液两相流动与沸腾数值模拟,化工学报,65(2), 495-500,2014 (EI). [14]杨元龙,孙宝芝,王林川,杨龙滨. 不同运行工况下蒸汽发生器热工水力稳态特性数值研究,原子能科学技术,47( 5),761-767,2013 (EI). [15]杨柳,孙宝芝,杨元龙,郑陆松. 管束外垂直上升汽液两相流沸腾传热特性的数值模拟,原子能科学技术,46(增刊),192-198,2012 (EI). [16]杨元龙,孙宝芝,张国磊,张鹏. 支撑板对蒸汽发生器流动与传热特性的影响,上海交通大学学报,48(2),76-81,2014(EI). [17]孙宝芝,郭家敏,雷雨,杨龙滨,张国磊,李彦军. 船用蒸汽蓄热器非平衡热力过程,化工学报,64(S1),59-65,2013(EI). [18]郑陆松,孙宝芝,杨元龙,杨柳. 基于流热固耦合的核电蒸汽发生器传热管热应力数值模拟,原子能科学技术,2014,48(1):74-80 (EI). [19]孙宝芝,杨柳,杨元龙,郑陆松. 支撑板缝隙对蒸汽发生器热工水力特性的影响,工程热物理学报, 2014,35(9):1821-1825 (EI). [20]孙宝芝,曹民侠,赵嘉铭,李彦军. 管壳式换热器瞬态换热性能分析, 哈尔滨工程大学学报,28(12), 1332-1336,2007 (EI).

学术兼职

国家自然科学基金、国家博士后自然科学基金、河北省自然科学基金、山东省自然科学基金、黑龙江省自然科学基金同行评议专家。国际SCI 期刊《Energy Conversion and Management》、《International Journal of Heat and Mass Transfer》 、《Applied Thermal Engineering》、《International Journal of Thermal Science》、《Annals of Nuclear Energy》等审稿人。国内期刊《工程热物理学报》、《西安交通大学学报》、《哈尔滨工业大学学报》、《哈尔滨工程大学学报》等的审稿专家。

推荐链接
down
wechat
bug