近期论文

查看导师新发文章 （温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Gumulya, M., J. Joshi, R. Utikar, G. Evans, and V. K. Pareek. 2016.“Bubbles in viscous liquids: Time dependent behaviour and wake characteristics.”Chemical Engineering Science 144: 298-309. Amiri, A., P. Vijay, M. O. Tade, K. Ahmed, G. Ingram, V. K. Pareek, and R. Utikar. 2016.“Planar SOFC system modelling and simulation including a 3D stack module.”International Journal of Hydrogen Energy 41 (4): 2919-2930. Ao, M., G. H. Pham, V. Sage, and V. K. Pareek. 2016.“Structure and activity of strontium substituted LaCoO3 perovskite catalysts for syngas conversion.”Journal of Molecular Catalysis A: Chemical 416: 96-104. Najibullah Khan, N., A. Barifcani, M. O. Tade, and V. K. Pareek. 2016.“A case study: Application of energy and exergy analysis for enhancing the process efficiency of a three stage propane pre-cooling cycle of the cascade LNG process.”Journal of Natural Gas Science & Engineering 29: 125-133. Mitra, S., E. Doroodchi, V. K. Pareek, J. Joshi, and G. Evans. 2015.“Collision behaviour of a smaller particle into a larger stationary droplet.”Advanced Powder Technology 26 (1): 280-295. Sharma, A., Y. Shinde, V. K. Pareek, and D. Zhang. 2015.“Process modelling of biomass conversion to biofuels with combined heat and power.”Bioresource Technology 198: 309-315. Gumulya, M., R. Utikar, V. K. Pareek, R. Mead-Hunter, S. Mitra, and G. Evans. 2015.“Evaporation of a droplet on a heated spherical particle.”Chemical Engineering Journal 278: 309-319. Nguyen, T. V., S. Mitra, V. K. Pareek, J. Joshi, and G. Evans. 2015.“Comparison of vaporization models for feed droplet in fluid catalytic cracking risers.”Chemical Engineering Research and Design 101: 82-97. Parmar, H., V. K. Pareek, C. M. Phan, and G. Evans. 2015.“Influence of jet-jet interaction on droplet size and jet instability in immiscible liquid-liquid system.”Chemical Engineering Science 123: 247-254. Sharma, A., S. Wang, V. K. Pareek, H. Yang, H. Yang, D. Zhang, and D. Zhang. 2015.“Multi-fluid reactive modeling of fluidized bed pyrolysis process.”Chemical Engineering Science 123: 311-321. Amiri, A., P. Vijay, M. O. Tade, K. Ahmed, G. Ingram, V. K. Pareek, and R. Utikar. 2015.“Solid oxide fuel cell reactor analysis and optimisation through a novel multi-scale modelling strategy.”Computers and Chemical Engineering 78 (2015): 10-23. Sun, B., K. Guo, and V. K. Pareek. 2015.“Dynamic simulation of hazard analysis of radiations from LNG pool fire.”Journal of Loss Prevention in the Process Industries 35: 200-210. Wadnerkar, D., V. K. Pareek, and R. Utikar. 2015.“CFD modelling of flow and solids distribution in carbon-in-leach tanks.”Metals 5 (4): 1997-2020. Wadnerkar, D., M. O. Tade, V. K. Pareek, and R. Utikar. 2015.“Modeling and optimization of Carbon in leach (CIL) circuit for gold recovery.”Minerals Engineering 83: 136-148. Shah, M., R. Utikar, V. K. Pareek, M. O. Tade, and G. Evans. 2015.“Effect of closure models on Eulerian-Eulerian gas-solid flow predictions in riser.”Powder Technology 269: 247-258. Shen, Z., B. Liu, V. K. Pareek, S. Wang, X. Li, L. Liu, and S. Liu. 2015.“Sustainable synthesis of highly efficient sunlight-driven Ag embedded AgCl photocatalysts.”RSC Advances 5 (98): 80488-80495. Boyjoo, Y., K. Merigot, J. Lamonier, V. K. Pareek, M. O. Tade, and J. Liu. 2015.“Synthesis of CaCO3@C yolk-shell particles for CO2 adsorption.”RSC Advances 5: 24872-24876. Sharma, A., V. K. Pareek, and D. Zhang. 2015.“Biomass pyrolysis - A review of modelling, process parameters and catalytic studies.”Renewable and Sustainable Energy Reviews 50: 1081-1096. Arjomandnia, P., M. O. Tade, V. K. Pareek, and E. F. May. 2014.“Analysis of Available Data from Liquefied Natural Gas Rollover Incidents to Determine Critical Stability Ratios.”AI Ch E Journal 60 (1): 362-374. Sharma, A., S. Wang, V. K. Pareek, H. Yang, and D. Zhang. 2014.“CFD modeling of mixing/segregation behavior of biomass and biochar particles in a bubbling fluidized bed.”Chemical Engineering Science 106: 264-274.