Prinz, Friedrich - Stanford University - Department of Mechanical Engineering

个人简介

Fritz Prinz is the Finmeccanica Professor in the School of Engineering at Stanford University, Professor of Materials Science and Engineering, Professor of Mechanical Engineering, and Senior Fellow at the Precourt Institute for Energy. He also serves as the Director of the Nanoscale Prototyping Laboratory and Faculty Co-director of the NPL-Affiliate Program. A solid-state physicist by training, Prinz leads a group of doctoral students, postdoctoral scholars, and visiting scholars who are addressing fundamental issues on energy conversion and storage at the nanoscale. In his Laboratory, a wide range of nano-fabrication technologies are employed to build prototype fuel cells and capacitors with induced topological electronic states. We are testing these concepts and novel material structures through atomic layer deposition, scanning tunneling microscopy, impedance spectroscopy and other technologies. In addition, the Prinz group group uses atomic scale modeling to gain insights into the nature of charge separation and recombination processes. Before coming to Stanford in 1994, he was on the faculty at Carnegie Mellon University. Prinz earned a PhD in Physics at the University of Vienna. Honors & Awards Sir Christopher Hinton Lecture, Royal Academy of Engineering (1991) Engineer of the Year, American Society of Mechanical Engineers, Pittsburgh, PA Section (1991 - 1992) Corresponding member, Austrian Academy of Science, Vienna, Austria (1996) Award for Excellence, Literati Club (2002) Most Outstanding Paper in the 2001 volume, Rapid Prototyping Journal (2002) The AM Strickland Prize for Best Paper in 2005, The Institution of Mechanical Engineers, London, UK (2005) Tedori-Callinan Lecture, University of Pennsylvania (2006) Fellow, American Association for the Advancement of Science (AAAS) (2007) Woodruff Colloquium in the Theme of Energy, Georgia Institute of Technology, Atlanta, GA (2008) Munushian Lecture, University of Southern California (2009) Professional Education PhD, University of Vienna, Physics (1975)

研究领域

Fritz Prinz is the Finmeccanica Professor in the School of Engineering at Stanford University, Professor of Materials Science and Engineering, Professor of Mechanical Engineering, and Senior Fellow at the Precourt Institute for Energy. He also serves as the Director of the Nanoscale Prototyping Laboratory and Faculty Co-director of the NPL-Affiliate Program. A solid-state physicist by training, Prinz leads a group of doctoral students, postdoctoral scholars, and visiting scholars who are addressing fundamental issues on energy conversion and storage at the nanoscale. In his Laboratory, a wide range of nano-fabrication technologies are employed to build prototype fuel cells and capacitors with induced topological electronic states. We are testing these concepts and novel material structures through atomic layer deposition, scanning tunneling microscopy, impedance spectroscopy and other technologies.

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Preface for the Special Issue of Sustainable Manufacturing in 4th Industrial Revolution INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Prinz, F., Chun, D., Ahn, S. 2018; 5 (4): 457 Implications of Electricity Liberalization for Combined Heat and Power (CHP) Fuel Cell Systems (FCSs): a Case Study of the United Kingdom Journal of Power Sources. Prinz, F., B., Colella, W. Design, Construction, and Testing of a Fuel Cell Powered Scooter Journal of Power Sources. Prinz, F., B., Colella, W. Modelling Results for the Thermal Management Sub-System of a Combined Heat and Power (CHP) Fuel Cell Systems (FCS) Journal of Power Sources. Prinz, F., B., Colella, W. Design Considerations for Effective Control of an Afterburner Sub-System in a Combined Heat and Power (CHP) Fuel Cell System (FCS) Journal of Power Sources. Prinz, F., B., Colella, W. Design Options for Achieving a Rapidly Variable Heat-to-Power Ratio in a Combined Heat and Power (CHP) Fuel Cell System Journal of Power Sources. Prinz, F., B., Colella, W. Micro-scale Electrochemistry: Application to Fuel Cell Prinz, F., B., O'Hayre, R. Cantilever Tip-Probe Arrays for Simultaneous SECM and AFM Analysis Rapid Prototyping Laboratory, Tao, Y., Fasching, R., Prinz, F. Near Net Shape Forming Of Advanced Structural Ceramic Devices Prinz, F., B., Liu, H. The Mesicopter: A Meso-Scale Flight Vehicle NIAC Phase II Technical Proposal, Kroo, I., Prinz, F. Plasma-enhanced atomic layer deposition of superconducting niobium nitride JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, Sowa, M. J., Yemane, Y., Zhang, J., Palmstrom, J. C., Ju, L., Strandwitz, N. C., Prinz, F. B., Provine, J. 2017; 35 (1) Direct and continuous strain control of catalysts with tunable battery electrode materials SCIENCE, Wang, H., Xu, S., Tsai, C., Li, Y., Liu, C., Zhao, J., Liu, Y., Yuan, H., Abild-Pedersen, F., Prinz, F. B., Norskov, J. K., Cui, Y. 2016; 354 (6315): 1031-1036 Bimetallic Nickel/Ruthenium Catalysts Synthesized by Atomic Layer Deposition for Low-Temperature Direct Methanol Solid Oxide Fuel Cells ACS APPLIED MATERIALS & INTERFACES, Jeong, H., Kim, J. W., Park, J., An, J., Lee, T., Prinz, F. B., Shim, J. H. 2016; 8 (44): 30090-30098 Plasma-enhanced atomic layer deposition of barium titanate with aluminum incorporation ACTA MATERIALIA, Kim, Y., Schindler, P., Dadlani, A. L., Acharya, S., Provine, J., An, J., Prinz, F. B. 2016; 117: 153-159 Plasma-enhanced atomic layer deposition of tungsten nitride JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, Sowa, M. J., Yemane, Y., Prinz, F. B., Provine, J. 2016; 34 (5) Plasma-Enhanced Atomic Layer Deposition of SiN-AIN Composites for Ultra Low Wet Etch Rates in Hydrofluoric Acid ACS APPLIED MATERIALS & INTERFACES, Kim, Y., Provine, J., Waich, S. P., Park, J., Phuthong, W., Dadlani, A. L., Kim, H., Schindier, P., Kim, K., Prinz, F. B. 2016; 8 (27): 17599-17605 Correlation of film density and wet etch rate in hydrofluoric acid of plasma enhanced atomic layer deposited silicon nitride AIP ADVANCES, Provine, J., Schindler, P., Kim, Y., Walch, S. P., Kim, H. J., Kim, K., Prinz, F. B. 2016; 6 (6) Atomically Flat Silicon Oxide Monolayer Generated by Remote Plasma JOURNAL OF PHYSICAL CHEMISTRY C, Thian, D., Yemane, Y. T., Logar, M., Xu, S., Schindler, P., Winterkorn, M. M., Provine, J., Prinz, F. B. 2016; 120 (15): 8148-8156 Relating Electronic and Geometric Structure of Atomic Layer Deposited BaTiO3 to its Electrical Properties JOURNAL OF PHYSICAL CHEMISTRY LETTERS, Torgersen, J., Acharya, S., Dadlani, A. L., Petousis, I., Kim, Y., Trejo, O., Nordlund, D., Prinz, F. B., 2016; 7 (8): 1428-1433 Oscillatory barrier-assisted Langmuir-Blodgett deposition of large-scale quantum dot monolayers APPLIED SURFACE SCIENCE, Xu, S., Dadlani, A. L., Acharya, S., Schindler, P., Prinz, F. B. 2016; 367: 500-506