近期论文

查看导师新发文章 （温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Liu, Xiaogang and Meehan, Paul A. (2016) Investigation of squeal noise under positive friction characteristics condition provided by friction modifiers. Journal of Sound and Vibration, 371 393-405. doi:10.1016/j.jsv.2016.02.028 Li, Yanle, Daniel, William J. T. and Meehan, Paul A. (2016) Deformation analysis in single-point incremental forming through finite element simulation. International Journal of Advanced Manufacturing Technology, . doi:10.1007/s00170-016-8727-9 Li, Yanle, Daniel, William J. T., Liu, Zhaobing, Lu, Haibo and Meehan, Paul (2015) Deformation mechanics and efficient force prediction in single point incremental forming. Journal of Materials Processing Technology, 221 100-111. doi:10.1016/j.jmatprotec.2015.02.009 Lu, Haibo, Kearney, Michael, Li, Yanle, Liu, Sheng, Daniel, William J. T. and Meehan, Paul A. (2015) Model Predictive control of incremental sheet forming for geometric accuracy improvement. International Journal of Advanced Manufacturing Technology, 82 9-12: 1781-1794. doi:10.1007/s00170-015-7431-5 Tian, Ye, Liu, Sheng, Daniel, William J.T. and Meehan, Paul A. (2015) Investigation of the impact of locomotive creep control on wear under changing contact conditions. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 53 5: 692-709. doi:10.1080/00423114.2015.1020815 Li, Yanle, Lu, Haibo, Daniel, William, J.T and Meehan, Paul A (2015) Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology. International Journal of Advanced Manufacturing Technology, 79 9-12: 2041-2055. doi:10.1007/s00170-015-6986-5 Liu, Xiaogang and Meehan, Paul A. (2015) Wheel squeal noise: a simplified model to simulate the effect of rolling speed and angle of attack. Journal of Sound and Vibration, 338 184-198. doi:10.1016/j.jsv.2014.10.031 Tian, Ye, Daniel, William J.T., Liu, Sheng and Meehan, Paul A. (2015) Comparison of PI and fuzzy logic based sliding mode locomotive creep controls with change of rail-wheel contact conditions. International Journal of Rail Transportation, 3 1: 40-59. doi:10.1080/23248378.2014.994259 Liu, Sheng, Tian, Ye, Daniel, William J. T. and Meehan, Paul A. (2015) Dynamic response of a locomotive with AC electric drives to changes in friction conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, . doi:10.1177/0954409715620535 Tian, Ye, Daniel, J. T. and Meehan, Paul A. (2015) Real-time rail–wheel wear damage control. International Journal of Rail Transportation, 4 2: 113-129. doi:10.1080/23248378.2015.1121411 Liu, Zhaobing, Li, Yanle and Meehan, Paul A. (2014) Tool path strategies and deformation analysis in multi-pass incremental sheet forming process. The International Journal of Advanced Manufacturing Technology, 75 1-4: 395-409. doi:10.1007/s00170-014-6143-6 Jiang, Shijie and Meehan, Paul A. (2014) Sensitivity analysis of simulation model on railway rolling noise prediction. International Journal of Vehicle Noise and Vibration, 10 3: 241-256. doi:10.1504/IJVNV.2014.064258 Lu, Haibo, Li, Yanle, Liu, Zhaobing, Liu, Sheng and Meehan, Paul A. (2014) Study on step depth for part accuracy improvement in incremental sheet forming process. Advance Materials Research, 939 274-280. doi:10.4028/www.scientific.net/AMR.939.274 Reid, A. W., McAree, P. R., Meehan, P. A. and Gurgenci, H. (2014) Longwall shearer cutting force estimation. ASME Journal of Dynamic Systems, Measurement, and Control, 136 3: . doi:10.1115/1.4026326 Li, Yanle, Liu, Zhaobing, Lu, Haibo, Daniel, W. J. T. (Bill), Liu, Sheng and Meehan, Paul A. (2014) Efficient force prediction for incremental sheet forming and experimental validation. International Journal of Advanced Manufacturing Technology, 73 1-4: 571-587. doi:10.1007/s00170-014-5665-2 Varghese, J., Bellette, P. A., Weegink, K. J., Bradley, A. P. and Meehan, P. A. (2014) Analysis of the non-Markov parameter in continuous-time signal processing. Physical Review E, 89 2: . doi:10.1103/PhysRevE.89.022109 Liu, Xiaogang and Meehan, Paul A. (2014) Investigation of the effect of relative humidity on lateral force in rolling contact and curve squeal. Wear, 310 1-2: 12-19. doi:10.1016/j.wear.2013.11.045 Liu, Zhaobing, Liu, Sheng, Li, Yanle and Meehan, Paul A. (2014) Modelling and optimization of surface roughness in incremental sheet forming using a multi-objective function. Materials and Manufacturing Processes, 29 7: 808-818. doi:10.1080/10426914.2013.864405 Liu, Zhaobing, Daniel, William J. T., Li, Yanle, Liu, Sheng and Meehan, Paul A. (2014) Multi-pass deformation design for incremental sheet forming: Analytical modeling, finite element analysis and experimental validation. Journal of Materials Processing Technology, 214 3: 620-634. doi:10.1016/j.jmatprotec.2013.11.010 Li, Yanle, Liu, Zhaobing, Daniel, W. J. T. (Bill) and Meehan, P. A. (2014) Simulation and experimental observations of effect of different contact interfaces on the incremental sheet forming process. Materials and Manufacturing Processes, 29 2: 121-128. doi:10.1080/10426914.2013.822977