Caceres, Carlos - University of Queensland - School of Mechanical and Mining Engineering

研究领域

Micromechanics of deformation and fracture in light alloy castings. Environmental issues regarding light alloy applications in transporation

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Abaspour, Saeideh and Caceres, Carlos H. (2016) High temperature strength and stress relaxation behavior of dilute binary Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 3: 1313-1321. doi:10.1007/s11661-015-3292-7 Abaspour, Saeideh and Caceres, Carlos H. (2015) Thermodynamics-based selection and design of creep-resistant cast Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 12: 5972-5988. doi:10.1007/s11661-015-3128-5 Zhang, Bao, Yang, Kun V., Nagasekhar, Anumalasetty V., Caceres, Carlos H. and Easton, Mark (2014) Deformation behavior of the percolating eutectic intermetallic in HPDC and squeeze-cast Mg alloys. JOM, 66 10: 2086-2094. doi:10.1007/s11837-014-1147-0 Yang, Kun V., Caceres, Carlos H. and Easton, Mark A. (2014) Strengthening micromechanisms in cold-chamber high-pressure Die-Cast Mg-Al alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 9: 4117-4128. doi:10.1007/s11661-014-2326-x Zhang, Bao, Nagasekhar, Anumalasetty V., Tao, Xiaoma, Ouyang, Yifang, Caceres, Carlos H. and Easton, Mark (2014) Strengthening by the percolating intergranular eutectic in an HPDC Mg-Ce alloy. Materials Science and Engineering A, 599 204-211. doi:10.1016/j.msea.2014.01.074 Zhang, Bao, Gavras, Serge, Nagasekhar, Anumalasetty V., Caceres, Carlos Horacio and Easton, Mark A. (2014) The strength of the spatially interconnected eutectic network in HPDC Mg-La, Mg-Nd, and Mg-La-Nd alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 10: 4386-4397. doi:10.1007/s11661-014-2416-9 Yang, K. Vanna, Cáceres, C. H. and Easton, M. A. (2013) A microplasticity-based definition of the skin in HPDC Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 580 355-361. doi:10.1016/j.msea.2013.05.018 Yang, K. Vanna, Easton, M. A. and Cáceres, C. H. (2013) The development of the skin in HPDC Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 580 191-195. doi:10.1016/j.msea.2013.05.017 Zhang, Bao, Nagasekhar, Anumalasetty V., Sivarupan, Tharmalingam and Caceres, Carlos H. (2013) Deformation behavior of the percolating intermetallic microstructure of high pressure die cast AZ91 alloy. Advanced Engineering Materials, 15 11: 1059-1067. doi:10.1002/adem.201300138 Sivarupan, Tharmalingam, Caceres, Carlos H. and Taylor, John A. (2013) Alloy composition and dendrite arm spacing in Al-Si-Cu-Mg-Fe alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44A 9: 4071-4080. doi:10.1007/s11661-013-1768-x Sivarupan, Tharmalingam, Caceres, Carlos H. and Taylor, John Andrew (2013) Effect of Si content on the size of Fe-rich intermetallic particles in Al-xSi-0.8Fe alloys. Materials Science Forum, 765 107-111. doi:10.4028/www.scientific.net/MSF.765.107 Yang, Kun Vanna, Easton, Mark A. and Caceres, Carlos H. (2013) The effect of solidification dynamics on the formation of the skin in die cast Mg-Al and Mg-RE alloys. Advanced Engineering Materials, 15 4: 302-307. doi:10.1002/adem.201200188 Yang, K. Vanna, Caceres, C. H., Nagasekhar, A. V. and Easton, M. A. (2012) The skin effect and the yielding behavior of cold chamber high pressure die cast Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 542 49-55. doi:10.1016/j.msea.2012.02.029 Yang, K. Vanna, Caceres, C. H., Nagasekhar, A. V. and Easton, M. A. (2012) Low-strain plasticity in a high pressure die cast Mg-Al alloy. Modelling and Simulation in Materials Science and Engineering, 20 2: 1-9. doi:10.1088/0965-0393/20/2/024010 Caceres, C. H., Mann, Gemma E. and Griffiths, J. R. (2011) Grain size hardening in Mg and Mg-Zn solid solutions. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 42A 7: 1950-1959. doi:10.1007/s11661-010-0599-2 Yang, K. V., Caceres, C. H., Easton, M. A. and Gibson, M. A. (2011) The skin effect in a high pressure die cast Mg-La alloy. Kovove Materialy, 49 3: 207-212. doi:10.4149/km_2011_3_207 Nagasekhar, A. V., Caceres, C. H. and Kong, C. (2010) 3D characterization of intermetallics in a high pressure die cast Mg alloy using focused ion beam tomography. Materials Characterization, 61 11: 1035-1042. doi:10.1016/j.matchar.2010.06.007 Wang, Q. G., Praud, M., Needleman, A., Kim, K. S., Griffiths, J. R., Davidson, C. J., Caceres, C. H. and Benzerga, A. A. (2010) Size effects in aluminium alloy castings. Acta Materialia, 58 8: 3006-3013. doi:10.1016/j.actamat.2010.01.032 Nagasekhar, A.V., Easton, M.A. and Caceres, C.H. (2009) Solute content and the grain microstructure of high pressure diecast magnesium-aluminium alloys. Advanced Engineering Materials, 11 11: 912-919. doi:10.1002/adem.200900175