近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
期刊论文：
(45) Energy Consumption Analysis and Multiple-Criteria Evaluation of High-Speed Trains with Different Marshaled Forms in China, Science of the Total Environment, 2020 (JCR Q1)
(44) A hierarchical prediction scheme for effective properties of fuzzy fiber reinforced composites with two-scale interphases: Based on three-phase bridging model, Mechanics of Materials, 2020 (JCR Q1)
(43) Large deformation of hyperelastic thick-walled vessels under combined extension-torsion-pressure: analytical solution and FEM，Mechanics Based Design of Structures and Machines, 2020 (JCR Q2)
(42) Materials Selection of 3D-printed C ontinuous Carbon Fiber Reinforced Composites Considering Multiple Criteria, Materials & Design, 2020 (JCR Q1)
(41) New insights into the synergistic influence of voids and interphase characteristics on effective properties of unidirectional composites, Composite Structures, 2020 (JCR Q1)
(40) Effects of infill characteristics and strain rate on the deformation and failure properties of additively manufactured polyamide-based composite structures, Results in Physics, 2020 (JCR Q1)
(39) Effects of Scanning Strategy and Printing Temperature on the Compressive Behaviors of 3D Printed Polyamide-Based Composites, Polymers, 2020 (JCR Q1)
(38) Computational modeling of degradation process on the mechanical performance of PLA/Mg composite, Part L: Journal of Materials: Design and Applications, 2020 (JCR Q3)
(37) Tailorable rigidity and energy-absorption capability of 3D printed continuous carbon fiber reinforced polyamide composites, Composites Science and Technology, 2020 (JCR Q1)
(36) Modeling the mechanical response of polymers and nano-filled polymers: Effects of porosity and fillers content, Journal of Applied Polymer Science, 2020 (JCR Q2)
(35) Numerical investigation of smart auxetic 3D meta-structures based on shape memory polymers via topology optimization, Journal of Intelligent Material Systems and Structures, 2020 (JCR Q1)
(34) Visco-hyperelastic Swelling and Mechanical Behavior of Tough pH-sensitive Hydrogels: Theory Development and Numerical Implementation, International Journal of Engineering Science, 2020 (JCR Q1)
(33) Developing A Beam Formulation for Semi-crystalline Two-Way Shape-Memory-Polymers, Journal of Intelligent Material Systems and Structures, 2020 (JCR Q1)
(32) Flexure Behaviors of ABS-based Composites Containing Carbon and Kevlar Fibers by Material Extrusion 3D Printing, Polymers, 2019 (JCR Q1)
(31) Combined numerical and experimental investigation of degradation for PLA/Mg biodegradable composite, ACS Biomaterials Science & Engineering, 2019 (JCR Q1)
(30) Wrinkling and smoothing of a soft shell, Journal of the Mechanics and Physics of Solids, 2019 (JCR Q1)
(29) K Wang, Y Peng, RM Boumbimba, N Bahlouli, D Pessey, A Said, Constitutive Modeling of the Tensile Behavior of Recycled Polypropylene Based Composites, Materials, 2019 (JCR Q2)
(28) Molecular Dynamics Study on the Tribological Properties of Phosphorene/Polyethylene Composites, Coatings 9(5):342, 2019 (JCR Q2)
(27) J Saththasivam, K Wang, W Yiming, Z Liu, KA Mahmoud, A Flexible Ti3C2Tx (MXene)/Paper Membrane for Efficient Oil/Water Separation, RSC Advances，2019 (JCR Q2)
(26) X Chen, Y Peng, C Chen, J Li, K Wang, T Wang, Mechanical behavior and texture evolution of aluminum alloys subjected to strain path changes: Experiments and modeling, Materials Science and Engineering: A ，2019 (JCR Q1)
(25) Y Peng, Y Wu, K Wang, G Gao, S Ahzi, Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication, Composite Structures 207, 232-239，2019 (JCR Q1)
(24) Y Peng, W Ma, S Wang, K Wang, G Gao, Investigation of the fracture behaviors of windshield laminated glass used in high-speed trains, Composite Structures 207, 29-40, 2019 (JCR Q1)
(23) J Saththasivam, W Yiming, K Wang, J Jin, Z Liu, A Novel Architecture for Carbon Nanotube Membranes towards Fast and Efficient Oil/water Separation, Scientific Reports 8 (1), 7418 (JCR Q1)
(22) K Wang, J Saththasivam, W Yiming, K Loganathan, Z Liu, Fast and efficient separation of seawater algae using a low-fouling micro/nano-composite membrane, Desalination 433, 108-112, 2018 (JCR Q1)
(21) YM Manawi, K Wang, V Kochkodan, DJ Johnson, MA Atieh, MK Khraisheh, Engineering the Surface and Mechanical Properties of Water Desalination Membranes Using Ultralong Carbon Nanotubes, Membranes 8 (4), 106，2018 (JCR Q2)
(20) RM Boumbimba, M Coulibaly, Y Peng, EK N’souglo, K Wang, P Gerard, Investigation of the impact response of PMMA-based nano-rubbers under various temperatures, Journal of Polymer Research, 2018 (JCR Q3)
(19) K Wang, DS Han, W Yiming, S Ahzi, A Abdel-Wahab Z Liu, A windable and stretchable three-dimensional all-inorganic membrane for efficient oil/water separation, Scientific Reports, 7, Article number: 16081, 2017 (JCR Q1)
(18) K Wang, W Yiming, J Saththasivam, Z Liu, A flexible, robust and antifouling asymmetric membrane based on ultra-long ceramic/polymeric fibers for high-efficiency separation of oil/water emulsions, Nanoscale 9, 9018-9025, 2017. (JCR Q1).
(17) AKM Idrissa, K Wang, S Ahzi, S Patlazhan, Y Rémond, A composite approach for modeling deformation behaviors of thermoplastic polyurethane considering soft-hard domains transformation,International Journal of Material Forming, 1-8, 2017. (JCR Q2)
(16) K Wang, AA Abdalla, MA Khaleel, N Hilal, MK Khraisheh, Mechanical properties of water desalination and wastewater treatment membranes, Desalination 401, 190-205, 2017. (JCR Q1)
(15) RM Boumbimba, K Wang, E Hablot, N Bahlouli, S Ahzi, L Avérous, Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: Experiments and modeling of the stress–strain behavior. Polymer Engineering & Science 57 (1), 95-104, 2017. (JCR Q2)
(14) K Wang, N Bahlouli, F Addiego, S Ahzi, Elastic and yield behaviors of recycled polypropylene-based composites: Experimental and modeling study, Composites Part B: Engineering 99, 132-153, 2016. (JCR Q1)
(13) K Wang, N Bahlouli, RM Boumbimba, F Addiego, Y Rémond, Specimen Geometry Effect on the Deformation Mechanisms of Polypropylene-Based Composites Under Impact Loading at Different Temperatures, Journal of Dynamic Behavior of Materials 2 (1), 101-111, 2016.
(12) F Addiego, S Patlazhan, K Wang, S André, S Bernstorff, D Ruch, Time-resolved small-angle X-ray scattering study of void fraction evolution in high-density polyethylene during stress unloading and strain recovery. Polymer International 64 (11), 1513-1521, 2015. (JCR Q2)
(11) K Wang, B Brüster, F Addiego, G Kfoury, F Hassouna, D Ruch, J-M Raquez, P Dubois, Strain-induced deformation mechanisms of polylactide plasticized with acrylated poly (ethylene glycol) obtained by reactive extrusion, Polymer International 64 (11), 1544-1554, 2015. (JCR Q2)
(10) N Bahlouli, K Wang, R Matadi, F Addiego, S Ahzi , Strain rate sensitivity of polypropylene based particulate composites, Revue des composites et des matériaux avancés 131, 131, 2015.
(9) F Addiego, I Mihai, D Marti, K Wang, V Toniazzo, D Ruch, Polyaniline as potential radical scavenger for ultra-high molecular weight polyethylene, Synthetic Metals 198, 196-202, 2014 (JCR Q2)
(8) K Wang, F Addiego, A Laachachi, B Kaouache, N Bahlouli, V Toniazzo, D Ruch, Dynamic behavior and flame retardancy of HDPE/hemp short fiber composites: effect of coupling agent and fiber loading, Composite Structures 113, 74-82, 2014 (JCR Q1)
(7) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo , Impact response of recycled polypropylene-based composites under a wide range of temperature: effect of filler content and recycling, Composites Science and Technology 95, 89-99, 2014 (JCR Q1)
(6) K Wang, N Bahlouli, F Addiego, S Ahzi, Y Rémond, D Ruch, R Muller, Effect of talc content on the degradation of re-extruded polypropylene/talc composites, Polymer degradation and stability 98 (7), 1275-1286, 2013. (JCR Q1)
(5) K Wang, S Ahzi, RM Boumbimba, N Bahlouli, F Addiego, Y Rémond , Micromechanical modeling of the elastic behavior of polypropylene based organoclay nanocomposites under a wide range of temperatures and strain rates/frequencies, Mechanics of Materials 64, 56-68, 2013. (JCR Q1)
(4) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, R Muller, Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends, Polymer degradation and stability 97 (8), 1475-1484, 2012 (JCR Q1)
(3) RM Boumbimba, K Wang, N Bahlouli, S Ahzi, Y Rémond, F Addiego, Experimental investigation and
micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposite, Mechanics of Materials 52, 58-68, 2012. (JCR Q1)
(2) K Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, M Bouquey, Dynamic behaviour of a melt mixing polypropylene organoclay nanocomposites, Journal of Engineering Materials and Technology 134, 010905, 2012. (JCR Q3)
(1) R Matadi, E Hablot, K Wang, N Bahlouli, S Ahzi, L Avérous, High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibres, Composites Science and Technology 71 (5), 674-682, 2011 (JCR Q1)
国际会议报告及论文：
(26) 2. Shixian Li, Kui Wang*, Yanni Rao, Yong Peng, Guangjun Gao, Mechanical characterization of novel 3D printed composites with hybrid continuous fibers. 23rd International Conference on Composite Structures & 6th International Conference on Mechanics of Composites, Porto, Portugal, 1-4 September 2020.
(25) 1.Jin Wang, Yisen Liu, Kui Wang, Honghao Zhang, Yong Peng, Song Yao, Experimental investigation on axial crushing behavior of thin-walled structures made by FDM. 23rd International Conference on Composite Structures & 6th International Conference on Mechanics of Composites, Porto, Portugal, 1-4 September 2020.
(24) Xuanzhen Chen, Yong Peng*, Kui Wang, Guangjun Gao. Study on symmetrical scarf of CFRP laminates subjected to tensile loading. 22th International Conference of Composites Structures, Wuhan, China, 31 Oct-3 Nov 2019.
(23) Fengyan Chen, Yong Peng*, Kui Wang, Guangjun Gao. Study on high-velocity impact of CFRP laminates with different lay-up: experiments and modeling. 22th International Conference of Composites Structures, Wuhan, China, 31 Oct-3 Nov 2019.
(22) Yiyun Wu, Yong Peng, Kui Wang*, Guangjun Gao, Designable rigidity and energy-absorption capability of 3D printed continuous carbon fiber reinforced polyamide composites. 22th International Conference of Composites Structures, Wuhan, China, 31 Oct-3 Nov 2019.
(21) Y. Yang, T. Wang, K. Wang, F. Xu*, Curvature effect on wrinking and restabilization of highly stretched elastic shells, Engineering Mechanics Institute International Conference 2018, Shanghai, China, Nov. 2-4th 2018
(20) Y. Peng, W. Ma, S. Wang, K. Wang*, Impact behaviors of tempered glass and PVB laminated windshield for high-speed trains, 1st International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (ICOMP 2018), Wuhan, China, May 23-25 2018
(19) RM Boumbimba, M Coulibaly, K Wang, Investigation of the impact response of PMMA based nano-rubber over a large range of temperatures and strain rates, International Conference on Engineering, Applied Sciences and System Modeling (iceassm2017), April 18-21 2017, Accra, Ghana.
(18) RM Boumbimba, M Reulier, E Hablot, K Wang, N Bahlouli, S Ahzi, L Avérous, Modelling of compressive high strain rate behavior of biocomposite: application to dimer fatty acid-based polyamides with cellulose fibres, International Workshop DynEcoComp Dynamic behaviour of green composites, September 27-29 2016, ISAE-ENSMA, Poitiers, France.
(17) K Wang, M Khaleel, YM Manawi, V Kochkodan, MA Hussien, MK Khraisheh, A Benamor, Mechanical behavior of a fillerreinforced membrane for water treatment, 2nd International Conference on Desalination and Environment, January 23-26 2016, Doha, Qatar.
(16) K Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, Dynamic mechanical characterization and modelling of polypropylene based organoclay nanocomposite, 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, September 7-11 2015, Lugano, Switzerland.
(15) RM Boumbimba, K Wang, F Addiego, M Arnaud, P Gerard, D Ruch, Influence of fibre aqueous-based sizing treatments and of the matrix intrinsic reinforcement on the damage mechanisms of novel laminated acrylic thermoplastic composites, 18th International Conference on Composite Structures, June 15-18 2015, Lisbon, Portugal.
(14) N Bahlouli, K Wang, RM Boumbimba, C Wagner-Kocher, S Ahzi, Quasistatic to dynamic behavior of particulate composites for different temperatures, SEM 2015 Annual Conference and Exposition on Experimental and Applied Mechanics, June 8-11 2015, Hilton Orange County/Costa Mesa, Costa Mesa, CA, U.S.
(13) B Brüster, F Addiego, K Wang, S André, V Toniazzo, JM Raquez, P Dubois, Chain orientation and phase transformation competition in PLA and plasticized PLA during tensile testing, 6th International Conference on Polymer Behaviour (ICPB6), September 22-26 2014, University of Vienna, Austria.
(12) K Wang, N Bahlouli, F Addiego, S Ahzi, Y Remond, R Muller, Effect of recycling on polypropylene/ethylene octene rubber blends and polypropylene / talc composites used in automotive applications, Russian-French Symposium on composite materials, July 10-13 2012, Saint Petersburg, Russia.
(11) K Wang, N Barth, S Ahzi, R Matadi, N Bahlouli, Y Remond, On the micromechanical modeling of the thermomechanical behavior of semicrystalline polymers and polymer nanocomposites, Russian-French Symposium on composite materials, July 10-13 2012, Saint Petersburg, Russia.
(10) S Ahzi, K Wang, M Baniassad, N Bahlouli, R Matadi, Y Remond, H Garmestani, J Gracio, On the micromechanical modeling of the effective properties of polymer nanocomposites: statistical and classical approaches, 15th international conference on deformation, yield and fracture of polymers, April 1-5 2012, Rolduc Abbey, Kerkrade, Netherlands.
(9) N Bahlouli, Y Rémond, K Wang, R Matadi, S Ahzi, Dynamic behavior of virgin and recycled PP/EPR and PP/EPDM/Talc materials for car bumpers, 18th International Conference on Composite Materials, August 21-26 2011, Jeju island, Korea.
(8) R Matadi, N Bahlouli, K Wang, S Ahzi, Constitutive micromechanical model for the dynamic behavior of thermoplastics, 3rd International Conference on Impact Loading of Lightweight Structures, 28th June–1st july 2011, Valenciennes, France.
(7) R Matadi, N Bahlouli, K Wang, S Ahzi, Y Rémond, R Muller, Polymer/organoclay nanocomposites: processing, 27th World Congress of the Polymer Processing Society (PPS), May 10-14 2011, Marrakech, Morocco.
(6) S Ahzi, N Bahlouli, K Wang, R Matadi, Micromechanical Modeling of the Dynamic Behavior of Amorphous and Crystalline Polymers, 2011 TMS Annual Meeting & Exhibition, 27th February–3rd March 2011, San Diego, California, U.S.
(5) S Ahzi, N Bahloui, K Wang, R Matadi, R Muller, Mechanical Behavior of Melt Mixing Polypropylene Organoclay Nanocomposites, 2011 TMS Annual Meeting & Exhibition, 27th February–3rd March 2011, San Diego, California, U.S.
(4) R Matadi, K Wang, N Bahlouli, F Addiego, S Ahzi, Y Rémond, Modeling of the dynamic behavior of organoclay nanocomposites ,19th DYMAT Technical Meeting, December 1-3 2010, Strasbourg, France.
(3) K Wang, R Matadi, N Bahlouli, F Addiego, S Ahzi, Y Rémond, Experimental identification of dynamic behavior of exfoliated polypropylene based organoclay nanocomposites for a wide range of temperatures, 19th DYMAT Technical Meeting, December 1-3 2010, Strasbourg, France.
(2) K.Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, M Bouquey, Dynamic behaviour of a melt mixing polypropylene organoclay nanocomposites, 1st DYMAT Student Camp, October 5-7 2010, Guéthary, France.
(1) K Wang, R Matadi, N Balhouli, S Ahzi, Y Remond, M Bouquey, R Muller, polypropylene based organoclay nanocomposites: stiffness and yield stress predictions, 3rd International Conference on Advanced Nano Materials, September 12-15 2010, Agadir, Morocco.
国内会议报告及论文： (14) 吴依韵, 彭勇, 谢训, 汪馗, 高广军, 短碳纤维与连续碳纤维对3D打印制尼龙基复合材料的协同增强作用, 2018年全国固体力学学术会议, 2018.11, 哈尔滨
(13) 汪馗，Nadia Bahlouli，赵安东，Said Ahzi, 机械回收聚丙烯基复合材料力学行为研究, 2018年全国固体力学学术会议, 2018.11, 哈尔滨
(12) 李诗弦, 饶燕妮, 彭勇, 汪馗 , FDM制CF/KF协同增强ABS基复合材料力学性能研究，2019中国力学大学，2019.08，杭州
(11) 赵安东，饶燕妮，彭勇，汪馗，胞元材料及密度对点阵结构力学性能影响研究，2019中国力学大学，2019.08，杭州
(10) K Wang, YM Manawi, V Kochkodan, MA Hussien, MK Khraisheh, A Benamor, Mechanical behavior of a novel nanocomposite polysulphone – carbon nanotubes membrane for water treatment, Qatar Foundation Annual Research Conference, March 22-23 2016, Doha, Qatar.
(9) K Wang, R Matadi , C Bernard, N Bahlouli, PM Correia, S Ahzi, Y Rémond. Influence du taux de charge et de la température sur le comportement mécanique de composites particulaires :du statique au dynamique, JST Transition statique – dynamique dans les matériaux et structures composites, November 5th, 2014, ONERA, Chatillon, France.
(8) F Addiego, K Wang, B Kaouache, V Toniazzo, D Ruch, Effet du taux de fibre et de l’agent de couplage sur le comportement en compression dynamique de composites HDPE / fibres courtes de chanvre, 25ème fois le DEPOS (DEformation des POlymères Solides), March 26-28 2014, presqu?le de Giens, France.
(7) K Wang, F Addiego, G Kfoury, F Hassouna, V Toniazzo, D Ruch, Mécanismes de déformation en traction du polylactide (PLA) non modifié et plastifié par extrusion réactive, 25ème fois le DEPOS (DEformation des POlymères Solides), March 26-28 2014, presqu?le de Giens, France.
(6) N Bahlouli, K Wang, S Ahzi, Y Rémond, F Addiego, Effects du recyclage sur le polypropylene charges, Mécanique des matériaux biosourcés, January 20 - 24 2014, Aussois, France.
(5) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, D Ruch, Effect of recycling on the mechanical properties of polypropylene/EPR/talc composites used in automotive applications, 39ème Journées d’Etudes des Polymères (JEPO 39), October 16-21 2011, Val Joly, Eppe-Sauvage, France.
(4) R Matadi, E Hablot, K Wang, N Bahlouli, S Ahzi, L Averous, Analyse du comportement mécanique de biocomposites, à base de polyamides biosourcés et de fibres de cellulose, à haut taux de deformation, GDR week à l’Ecole des Mines de Saint-étienne, March 28-31 2011, France.
(3) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, D Ruch, Effect of recycling on the mechanical properties of polypropylene/EPR/talc composites used in automotive applications, 11ème Journée Scientifique GFP Grand-Est, June 22 2011, Luxembourg.
(2) N Bahlouli, K Wang, JG Sieffert, S Ahzi, Comportement thermomécanique dynamique de polymères multiphasés, Matériaux 2010, October 18 - 22 2010, Nantes, France.
(1) K Wang, N Bahlouli, S Ahzi, Chargement thermomécanique des polymères sous sollicitation dynamique, Journée Mécamat, May 20 2010, Paris, France.
京公网安备 11010802027423号