个人简介
2000-2004 重庆大学材料科学与工程学院，工学学士/金属压力加工
2006-2012 重庆大学材料科学与工程学院，工学博士/材料科学与工程
2012-2016 福州大学材料科学与工程学院，讲师
2016-至今 福州大学材料科学与工程学院，副教授
研究领域
形变金属微观组织及织构表征技术（EBSD，TEM），镁合金孪生变体选择机制，金属材料加工过程中微观组织与织构演变及控制,晶体学与晶体塑性模拟
近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Deng LIping, Wang Bingshu, Xiang Hongliang, Yang Xiaofang, Ke Han. Effect of Annealing on the Microstructure and Properties of in-situ Cu–Nb Microcomposite Wires. Acta Metallurgica Sinica. 2016; 29: 668-673
[2]Guo Ning, Song Bo, Yu Hongbing, Xin Rrelong, Wang Bingshu, Liu Tingting. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation. Materials & Design. 2016; 90:545-550.
[3]Deng Liping, Han Ke, Wang Bingshu, Yang Xiaofang, Liu Qing. Thermal stability of Cu-Nb microcomposite wires. Acta Materialia. 2015, 101:181-188
[4]汪炳叔, 邓丽萍, Adrien Chapuis, 郭宁, 李强. AZ31镁合金在平面应变压缩过程中的孪生行为研究. 金属学报.. 2015, 51(12):1441-1448
[5]Yao Jinyi, Wang Bingshu, Deng Liping, Adrien Chapuis, Li Qiang and Liu Qing. Simulation of texture evolution and deformation mechanism in Mg-3Al-1Zn alloy during uniaxial compression. Science China Technological Sciences. 2015: 58(12): 2052-2059
[6]Wang Bingshu, Deng Liping, Adrien Chapuis, Guo Ning, Xu Zeren and Li Qiang. Relationship between textures and deformation modes in Mg–3Al–1Zn alloy during uniaxial tension. Materials Characterization. 2015; 108: 42-50
[7]Xin Renlong, Liang Yingchun, Ding Changhong, Guo Changfa, Wang Bingshu, Liu Qing. Geometrical compatibility factor analysis of paired extension twins in extruded Mg–3Al–1Zn alloys. Materials & Design. 2015; 86: 656-663
[8]Guo Ning, Song Bo, Wang Bing-Shu and Liu Qing. Influence of Torsion Deformation on Textures of Cold Drawing Pearlitic Steel Wires. Acta Metallurgica Sinica. 2015; 28: 707-714
[9]Wang Bingshu, Deng Liping, Guo Ning, Xu Zeren and Li Qiang. EBSD analysis of {10–12} twinning activity in Mg–3Al–1Zn alloy during compression. Materials Characterization. 2014; 98: 180-185
[10]Guo Ning, Liu Tingting, Luan Baifeng, Wang Bingshu and Liu Qing. Dislocation density and configuration in fully pearlitic steel during wire drawing. Materials Research Innovations. 2014; 18: s249-254
[11]Chapuis Adrien, Wang Bingshu and Liu Qing. A comparative study between uniaxial compression and plane strain compression of Mg–3Al–1Zn alloy using experiments and simulations. Materials Science and Engineering: A. 2014; 597: 349-358
[12]Guo Ning, Luan Baifeng, Wang Bingshu and Liu Qing. Microstructure and texture evolution in fully pearlitic steel during wire drawing, Science China-Technological Sciences, 2013. 56(5): 1139-1146.
[13]Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Strain rate and texture effects on microstructural characteristics of Mg-3Al-1Zn Mg alloy during compression. Scripta Materialia. 2012. 66 (5): 239-242.
[14]Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression. Materials Science and Engineering A, 2012. 534:588-593.
[15]Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Hot-deformation behaviors of AZ31 alloys with different initial states. Transactions of Nonferrous Metals Society of China. 2008. 18: 145-149.
[16]Xin Renlong, Wang Bingshu, Huang Guangjie and Liu Qing. Effects of strain rate and temperature on microstructure and texture for AZ31 during uniaxial compression. Transactions of Nonferrous Metals Society of China. 2010. 20：594-598.
[17]Xin Renlong, Wang Bingshu, Huang Guangjie and Liu Qing. Examination of dynamic recrystallization during compression of AZ31 magnesium. Science in China Series E-Technological Sciences. 2009. 52: 176-179.
[18]M.Y. Wang, Xin Renlong, Wang Bingshu and Liu Qing. Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling. Materials Science and Engineering A. 2011, 528: 2941–2951.
[19]汪炳叔；辛仁龙；黄光杰；陈兴品；刘庆。EBSD分析技术在镁合金晶粒尺寸表征中的应用。电子显微学报。2009。28(1)：20-22。
[20]辛仁龙；汪炳叔；陈兴品；黄光杰；刘庆。形变镁合金微观组织与织构的EBSD研究。电子显微学报。2008。27(6)：495-498。
学术兼职
SCI期刊审稿人：Materials Science and Engineering A, Materials Characterization，Transactions of Nonferrous Metals Society of China
京公网安备 11010802027423号