个人简介
教育经历
• 1992.9-1996.1, 东南大学, 机械工程系, 博士
• 1989.9-1992.3, 东南大学, 材料科学与工程系, 硕士
• 1978.3-1982.1, 浙江大学, 材料科学与工程系, 学士
研究工作经历
• 2002.8-今, 东南大学, 机械系/材料学院, 教授
• 1999.8-2002.8, 韩国延世大学, 冶金系, 博士后/研究教授
• 1996.1-1999.7, 东南大学, 机械工程系, 讲师/副教授
• 1982.2-1989.8, 江苏省铸造热处理研究所, 热处理研究室, 助工/工程师
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Zhu Mingfang*, Zhang Lei, Zhao Honglei, StefanescuDoru M., Modeling of microstructural evolution during divorced eutectic solidification of spheroidal graphite, Acta Mater., 2015, 84: 413-425.
•Pan Shiyan, Zhang Qingyu, Zhu Mingfang*, Rettenmayr Markus, Liquid droplet migration under static and dynamic conditions: Analytical model, phase-field simulation and experiment, ActaMater., 2015, 86: 229-239.
•Pan Shiyan, Zhu Mingfang*, A three-dimensional sharp interface model for the quantitative simulation of solutal dendritic growth, ActaMater., 2010, 58(1): 340-352.
•Sun Dongke, Zhu Mingfang*, Pan Shiyan, RaabeDierk, Lattice Boltzmann modeling of dendritic growth in a forced melt convection, ActaMater., 2009, 57(6): 1755-1767.
•Zhu Mingfang*, StefanescuDoru M., Virtual front tracking model for the quantitative modeling of dendritic growth in solidification of alloys, ActaMater., 2007, 55(5): 1741-1755.
•Zhang Xianfei*, Zhao Jiuzhou*, Jiang Hongxiang, Zhu Mingfang, A three-dimensional cellular automaton model for dendritic growth in multi-component alloys, ActaMater., 2012, 60(5): 2249-2257.
•Zhang Qingyu, Sun Dongke, Zhang Youfa*, Zhu Mingfang*, Lattice Boltzmann modeling of droplet condensation on superhydrophobicnanoarrays, Langmuir, 2014, 30(42): 12559-12569.
•Zhu Mingfang*, Sun Dongke, Pan Shiyan, Zhang Qingyu, RaabeDierk, Modelling of dendritic growth during alloy solidification under natural convection, Modell. Simul. Mater. Sci. Eng., 2014, 22(3): 034006.
•An Dong, Pan Shiyan, Huang Li, Dai Ting, Krakauer Bruce, Zhu Mingfang*, Modeling of ferrite-austenite phase transformation using a cellular automaton model, ISIJ Int., 2014, 54(2): 422-429.
•Zhu Mingfang*, Li Zhengyang, An Dong, Zhang Qingyu, Dai Ting, Cellular automaton modeling of microporosity formation during solidification of aluminum alloys, ISIJ Int., 2014, 54(2): 384-391.
•Zhang Qingyu, Lippmann Stephanie, Grasemann Aaron, Zhu Mingfang, Rettenmayr Markus*, Determination of temperature dependent thermophysical properties using an inverse method and an infrared line camera, Int. J. Heat Mass Transfer, 2016, 96: 242-248.
•陈海楠, 孙东科, 戴挺, 朱鸣芳*, 凝固前沿和气泡相互作用的大密度比格子玻尔兹曼方法模拟, 物理学报, 2013, 62(12): 120502.
•周丰茂, 孙东科, 朱鸣芳*, 偏晶合金液-液相分离的格子玻尔兹曼方法模拟, 物理学报, 2010, 59(5): 468-475.
•潘诗琰, 朱鸣芳*, 双边扩散枝晶生长的定量相场模型, 物理学报, 2012, 61(22): 228102.
•吴伟, 孙东科, 戴挺, 朱鸣芳*, 枝晶生长和气泡形成的数值模拟, 物理学报, 2012, 61(15): 150501.
•Zhu Mingfang*, Pan Shiyan, Sun Dongke, Zhao Honglei, Numerical simulation of microstructure evolution during alloy solidification by using cellular automaton method, ISIJ Int., 2010, 50(12): 1851-1858.
•Zhu Mingfang*, Hong Chunpyo, StefanescuDoru M., Chang Y. Austin, Computational modeling of microstructure evolution in solidification of aluminum alloys, Metall. Mater. Trans. B, 2007, 38(4): 517-524.
•Zhu Mingfang*, Cao Weisheng, Chen Shuanglin, Hong Chunpyo, Chang Y. Austin, Modeling of microstructure and microsegregation in solidification of multi-component alloys, J. Phase Equilib. Diffus., 2007, 28(1): 130-138.
•Zhu Mingfang*, Hong Chunpyo, Modeling of irregular eutectic microstructures in solidification of Al-Si alloys, Metall. Mater. Trans. A, 2004, 35A(5): 1555-1563.
•Zhu Mingfang*, Lee Sungyoon, Hong Chunpyo, Modified cellular automaton model for the prediction of dendritic growth with melt convection, Phys. Rev. E, 2004, 69(6): 061610.
•Zhu Mingfang*, Hong Chunpyo, Modeling of microstructure evolution in regular eutectic growth, Phys. Rev. B, 2002, 66(15): 155428
京公网安备 11010802027423号