近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Chen Yijia,Lin Li,Sun Luoming,Xie Xiyu,Ma Zhiyuan.2-D microstructure characterization and reconstruction of heterogeneous materials based on combin...[J],MATERIALS CHARACTERIZATION,2023,196:112585
[2]Ma Zhiyuan,Sun Luoming,Luo Zhongbing,Lin Li,Lei Mingkai.Ultrasonic inverse identification of surface integrity of aviation functional coatings through ma...[J],NDT & E INTERNATIONAL,2023,133:102733
[3]林莉,马志远,孙珞茗,罗忠兵,雷明凯.航空功能涂层表界面完整性参数超声检测反演原理及其应用[J],机械工程学报,2023,59(8):1-8
[4]严凡,林莉,金士杰.超声全矩阵数据联合稀疏重构的多测量向量模型应用[J],应用声学,2023,42(3):523-528
[5]Sun Luoming,Lin Li,Ma Zhiyuan,Lei Mingkai.Ultrasonic characterization of elastic constants of plasma sprayed Al2O3 coatings based on simula...[J],NDT & E INTERNATIONAL,2022,128:102632
[6]Sun Xu,Lin Li,Jin Shijie.Resolution enhancement in ultrasonic TOFD imaging by combining sparse deconvolution and synthetic...[J],CHINESE JOURNAL OF MECHANICAL ENGINEERING,2022,35(1):94
[7]Ma Zhiyuan,Qi Tianzhi,Lin Li,Lei Mingkai.Inverse identification of geometric and acoustic parameters of inhomogeneous coatings through URC...[J],ULTRASONICS,2022,119:106626
[8]Ma Zhiyuan,Sun Luoming,Chen Yijia,Lin Li.Ultrasonic prediction of thermal barrier coating porosity through multiscale-characteristic-based...[J],APPLIED ACOUSTICS,2022,195:108831
[9]Qi Tianzhi,Lin Li,Zhang Shuning,Ma Zhiyuan.Identification interface stiffness of coating/substrate structure based on ultrasonic pressure re...[J],APPLIED ACOUSTICS,2022,201:109094
[10]Sun Xu,Lin Li,Jin Shijie.Improving time resolution of ultrasonic signals with frequency-domain sparse blind deconvolution ...[J],JOURNAL OF NONDESTRUCTIVE EVALUATION,2022,41(2):37
[11]董珍一,林莉,雷明凯,马志远.基于BPNN的封严涂层孔隙分布均匀性超声表征[J],航空学报,2022,43(5):570-579
[12]孟亦圆,林莉,陈军,金士杰,罗忠兵.基于临界折射纵波递归定量分析的纯铁疲劳损伤无损评价[J],材料工程,2022,50(10):172-178
[13]解曦宇,马志远,林莉.基于纹理合成优化算法的多相非均质材料二维微观结构表征与重建[J],航空制造技术,2022,65(4):100-106
[14]张伟,林莉,樊俊铃,马志远.基于PSO-SVR的非均质涂层组织均匀性超声表征[J],中国表面工程,2022,35(6):222-231
[15]张书宁,刘小川,马志远,武玉,林莉.多相非均质GFRP材料的超声检测及其声学特性[J],无损检测,2022,44(12):6-11
[16]程燕岷,林莉,廖静瑜,张晓峰,杨会敏,张东辉,金士杰.基于多层神经网络的相控阵超声图像缺陷识别[J],无损探伤,2022,46(6):6-10
[17]程铭,林莉,罗忠兵,马志远.基于建模仿真的颗粒增强铝基复合材料缺陷超声检测[J],无损探伤,2022,46(5):10-13+17
[18]牛洪涛,赵天伟,金士杰,张东辉,林莉.曲面构件轮廓全聚焦超声成像表征[J],无损探伤,2022,46(1):6-9
[19]Shi Siqi,Lin Li,Luo Zhongbing,Sun Xu,Jin Shijie.Resolution enhancement of ultrasonic imaging at oblique incidence by using WTFM based on FMC-AR[J],MEASUREMENT,2021,183:109798
[20]Sun Xu,Lin Li,Ma Zhiyuan,Jin Shijie.Enhancement of time resolution in ultrasonic time-of-flight diffraction technique with frequency-...[J],IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL,2021,68(10):3204-3215
[21]贾振元,赖一楠,王福吉,陈明,李迎光,湛利华,顾伯洪,徐春广,林莉,段玉岗,叶鑫.复合材料构件制造关键基础科学问题——第248期“双清论坛”学术综述[J],中国科学基金,2021,35(5):764-773
[22]史思琪,李飞龙,金士杰,林莉,罗忠兵.C/SiC复合材料空气耦合超声检测数值模拟[J],复合材料学报,2021,38(11):3737-3746
[23]张鑫,林莉,金士杰.奥氏体不锈钢窄间隙焊缝侧壁未熔合相控阵超声检测[J],应用声学,2021
[24]史思琪,林莉,严宇,廖静瑜,张晓峰,杨会敏,金士杰.基于AR-TFM方法的超声成像分辨力提升[J],无损检测,2021,43(12):1-4+80
[25]孟亦圆,林莉,罗忠兵.表面裂纹深度和取向的临界折射纵波检测[J],无损检测,2021,43(12):17-20
[26]马志远,李宗艺,林莉.基于核概率密度估计的CFRP孔隙率与超声衰减系数之间关系探讨[J],无损探伤,2021,45(2):16-20
[27]Lin Li,Zhang Wei,Ma Zhiyuan,Lei Mingkai.Porosity estimation of abradable seal coating with an optimized support vector regression model b...[J],NDT & E INTERNATIONAL,2020,113:102272
[28]Ma Zhiyuan,Zhang Wei,Luo Zhongbing,Sun Xu,Li Zongyi,Lin Li.Ultrasonic characterization of thermal barrier coatings porosity through BP neural network optimi...[J],ULTRASONICS,2020,100:105981
[29]Lin Li,Cao Huanqing,Luo Zhongbing.Characterization and optimization of acoustic field for curved array probe[J],ACOUSTICAL PHYSICS,2020,66(5):469-476
[30]李宗艺,张伟,林莉,马志远,雷明凯.基于面积分数多尺度分析的封严涂层孔隙分布均匀性定量表征[J],中国表面工程,2020,33(4):145-151
[31]林莉,史思琪,孙旭,马志远,张晓峰,刘丽丽,金士杰.基于自回归谱外推的全聚焦成像分辨力提升[J],机械工程学报,2020,56(22):8-13+23
[32]Guo Yanhui,Lin Li,Pan Xuemin,Zhang Donghui,Liu Lili,Lei Mingkai.Room- and service-temperature tensile properties of repeatedly welded austenitic stainless stee...[J],MATERIALS RESEARCH EXPRESS,2019,6(1)
[33]贾振元,张宇民,李刚,王福吉,高航,林莉,肖军,湛利华,陈磊.大型航空复合材料承力构件制造关键技术[J],中国基础科学,2019,21(2):20-27
[34]陈尧,冒秋琴,石文泽,陈果,林莉,金士杰,甘勇,吴霞,卢超.基于相位相干性的厚壁焊缝TOFD成像检测研究[J],机械工程学报,2019,55(4):25-32
[35]Guo Yanhui,Lin Li,Zhang Donghui,Liu Lili,Lei Mingkai.Microstructure and Mechanical Properties of Heat-Affected Zone of Repeated Welding AISI 304N Au...[J],METALS,2018,8(10)
[36]Lin Li,Cao Huanqing,Luo Zhongbing.Total focusing method imaging of multidirectional CFRP laminate with model-based time delay cor...[J],NDT & E INTERNATIONAL,2018,97:51-58
[37]高剑英,张伟,马志远,赫丽华,罗文,林莉,雷明凯.基于声压反射系数相位谱的涂层密度和纵波声速双参数反演[J],无损检测,2018,40(10):39-44
[38]孙旭,金士杰,张东辉,刘丽丽,杨会敏,林莉.基于自回归谱外推方法的TOFD检测盲区抑制[J],机械工程学报,2018,54(22):15-20
[39]陈军,刘国彩,林莉,罗忠兵.铁素体不锈钢晶粒度的非线性超声表征[J],无损检测,2018,40(7):15-18,81
[40]何晓晨,金士杰,林莉.超声背散射信号递归定量分析无损表征CFRP孔隙分布仿真[J],复合材料学报,2018,35(10):2753-2759
京公网安备 11010802027423号