个人简介
教育经历
1980.91982.6 浑江二中无
1996.91999.10 中科院长春光机所金属材料博士
1991.91994.4 吉林工业大学金属材料硕士
1982.91986.7 吉林工学院金属材料学士
工作经历
2001.11至今 大连理工大学副教授
1999.102001.11 大连理工大学博士后
1994.41996.9 长春光机学院教师
1986.71991.9 吉林省油泵厂技术员
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]韩立影,王存山,羌建兵.激光快速成形Ti64.52Fe29.32Zr5.86Y0.30医用合金组织与性能[J],中国有色金属学报,2018,28(3):474-482
[2]于群,王存山.电磁搅拌辅助Ni45合金的激光增材制造[J],中国激光,2018,45(4):0402003
[3]Zhang, Luan,Wang, Cunshan,Qian, Shengnan,Yu, Qun,Dong, Chuang.Microstructure and Wear Resistance of Laser-Clad (Co, Ni)(61.2)B26.2Si7.8Ta4.8 Coatings[J],METALS,2017,7(10)
[4]Han Liying,Wang Cunshan,Qiang Jianbing.Microstructure and properties of Ti-Fe-Zr-Y alloys prepared by laser rapid prototyping[J],JOURNAL OF ALLOYS AND COMPOUNDS,2017,700:159-168
[5]韩立影,王存山,冯巧.Y2O3含量对38CrMoAl钢表面激光合金化WC/Ni金属陶瓷组织与性能的影响[J],材料工程,2017,45(3):80-87
[6]Zhang L.,Wang C.,Han L.,Dong C..Influence of laser power on microstructure and properties of laser clad Co-based amorphous compos...[J],Surfaces and Interfaces,2017,6:18-23
[7]王存山,羌建兵.Microstructure and properties of Ti-Fe-Zr-Y alloys prepared by laser[J],Journal of Alloys and Compounds,2017,700(*):159-168
[8]王存山.Microstructure and Wear Resistance of Laser-Clad (Co, Ni)61.2B26.2Si7.8Ta4.8 Coatings[J],Metals,2017,7(49):1-7
[9]王存山.Microstructure and Properties of Ti64.51Fe26.40Zr5.86Sn2.93Y0.30 Biomedical Alloy Fabricated by L...[A],2017
[10]王存山,于群.激光熔覆纳米TiN-Ni45A复合涂层组织与性能[J],航空制造技术,2016,19:39-44,51
[11]单晓浩,王存山,于群.钛合金表面激光熔覆Nb-Al-Ti高温合金涂层组织与性能[J],中国激光,2016,43(8):190-197
[12]王存山.Influence of laser power on microstructure and properties of laser[J],Surfaces and Interfaces,2016,6:18-23
[13]王存山.激光快速成形Ti70.38Fe26.39Sn2.93Y0.3生物医用合金组织与性能[J],中国激光,2016,43(11):1-7
[14]Wang, C.,Dong, C..Design and laser cladding of Ti-Fe-Zr alloy coatings[J],Materials Today Communications,2015,3:43-51
[15]王存山.38CrMoAl 钢表面激光合金化WC/Co-Y2O3涂层的[J],中国激光,2015,42(8):11-16
[16]Syed, Rizwanulhaque,Jiang, Wei,Wang, Cunshan,Sabir, M. Iqbal.Fatigue life of stainless steel 304 enhancement by addition of multi-walled carbon nanotubes (M...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2015,29(1):291-296
[17]王存山,韩立影.激光硬化和渗氮复合处理38CrMoAl钢组织与性能[J],材料热处理学报,2014,35(z2):216-220,225
[18]王存山.Influence of yttrium on microstructure and properties of Ni-Al alloy coatings prepared by laser c...[J],Defence Technology,2014,10(0):22-27
[19]王存山.Fatigue life of stainless steel 304 enhancement by addition of multi-walled carbon nanotubes[J],Journal of Mechanical Science and Technology,2014,29(1):291-296
[20]柴龙顺,王存山,韩立影,张娈.纳米TiC/C对激光熔覆镍基合金涂层组织和性能的影响[J],中国激光,2014,41(12):1203003
京公网安备 11010802027423号