当前位置: X-MOL首页全球导师 国内导师 › 付雪松

个人简介

教育经历 2009.92013.9 大连理工大学材料加工工程博士 2007.92009.9 大连理工大学材料加工工程硕士 2003.92007.9 哈尔滨工业人大学材料成型及控制工程学士 2000.92003.9 天津市蓟县上仓中学 工作经历 2018.1至今 大连理工大学副教授 2013.9至今 大连理工大学讲师

研究领域

钛合金/高温合金/铝合金/铜合金强韧化; 微电子电路打印导电墨水制备; 结构材料微动疲劳行为; 环境损伤与表面强化; 塑性变形过程数值模拟

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Wang, Chenglin.The role of pyramidal < c plus a > dislocations in the grain refinement mechanism in Ti-6Al-4V ...[J],ACTA MATERIALIA,2021,200:101-115 Yang, Qi.Effect of different surface asperities and surface hardness induced by shot-peening on the fret...[J],SURFACE COATINGS TECHNOLOGY,2018,349:1098-1106 Yang, Qi.Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail...[J],INTERNATIONAL JOURNAL OF FATIGUE,2018,107:83-95 Yang, Qi,Zhou, Wenlong,Niu, Zhiqiang,Zheng, Xiaobing,Wang, Qi,Fu, Xuesong,Chen, Guoqing,Li, Zhiqiang.Effect of different surface asperities and surface hardness induced by shot-peening on the fret...[J],SURFACE & COATINGS TECHNOLOGY,2018,349:1098-1106 周文龙,陈国清,付雪松.Investigation on the fretting fatigue behaviors of Ti-6Al-4V dovetail joint specimens treated wit...[J],wear,2017,372(2):81-90 Chen Guoqing,Fu Xuesong,Wei Yanhui,Li Shan,Zhou Wenlong.Microstructure and wear properties of nickel-based surfacing deposited by plasma transferred ar...[J],8th Asian-European International Conference on Plasma Surface Engineering (AEPSE),2013,228(SUPPL.1):S276-S282 Chen, Guoqing,Fu, Xuesong,Luo, Junting,Zu, Yufei,Zhou, Wenlong.Effect of cooling rate on the microstructure and mechanical properties of melt-grown Al2O3/YAG/...[J],JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2012,32(16):4195-4204 Fu, Xue-song,Chen, Guo-qing,Zu, Yu-fei,Luo, Jun-ting,Zhou, Wen-long.Microstructure refinement approaches of melt-grown Al2O3/YAG/ZrO2 eutectic bulk[J],CERAMICS INTERNATIONAL,2013,39(7):7445-7452 Fu, Xuesong,Luo, Junting,Zhou, Wenlong,Chen, Guoqing,Zu, Yufei.Microstructure refinement of melt-grown Al2O3/YAG/ZrO2 eutectic composite by a new method: Melt...[J],SCRIPTA MATERIALIA,2013,68(9):731-734 Liu, Cheng-fang,Zhou, Wen-long,Fu, Xue-song,Chen, Guo-qing.A new mathematical model for determining the longitudinal strain in cold roll forming process[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,79(5-8):1055-1061 Li, Kang,Fu, Xue-song,Li, Rui-dong,Zhou, Wen-long,Li, Zhi-qiang.A mechanism study on characteristic curve of residual stress field in Ti-6Al-4V induced by wet ...[J],MATERIALS & DESIGN,2015,86:761-764 Fu, X.S.,Yang, Q.,Sun, W.,Lu, S.J.,Chen, G.Q.,Zhou, W.L..Multi-pass large strain rolling of as-cast AZ31 magnesium alloy[J],MATERIALS SCIENCE AND TECHNOLOGY,2016,32(18):1869-1876 付雪松,陈国清,周文龙.High temperature deformation of non-directionally solidified Al2O3/YAG/[J],Ceramics international,2017,43(2):1781-1787 Yang, Qi,Zhou, Wenlong,Gai, Pengtao,Zhang, Xinhua,Fu, Xuesong,Chen, Guoqing,Li, Zhiqiang.Investigation on the fretting fatigue behaviors of Ti-6A1-4V dovetail joint specimens treated w...[J],WEAR,2017,372:81-90 付雪松.热压退火处理对 AZ31/L2热轧复合板结合强度的影响[J],金属热处理,2022,3:31-35 阴晓宁.湿喷丸强化对TC4钛合金表面状态及疲劳性能的影响[J],金属热处理,2022,3:48-53 陈国清.氧化锆陶瓷超塑性变形行为及机理[J],现代技术陶瓷,2022,06:433-439 庞慧芳.时效对17-4 PH马氏体不锈钢抗应力腐蚀性能的影响[J],金属热处理,2022,3:104-108 赵慧生.拉-拉疲劳载荷下钛合金湿喷丸的残余应力松弛及再次喷丸工艺[J],材料工程,2022,48(5):136-143 陈国清.微波烧结WC-ZrO2复合材料的微观组织及增韧机理[J],现代技术陶瓷,2022,39(4):287-294 李康.微弧氧化处理TC4合金表面微动磨损性能[J],稀有金属材料与工程,2022,46(03):765-769 付雪松.基于高温熔凝法Al2O3/ZrO2/YAG共晶陶瓷显微组织演变规律[J],材料工程,2022,2:46-53 王成林.回火温度对40CrNi2Mo钢力学性能和干摩擦性能的影响[J],材料热处理学报,2020,41(4):75-82 李明浩.高温熔凝法制备Y2O3/Sm2O3双掺杂Al2O3-ZrO2共晶陶瓷的微观组织及力学性能[J],景德镇陶瓷学院学报,2019,40(3):334-341 朱修养.铸造奥氏体不锈钢焊接接头铁素体含量金相测定法的探讨[J],工程与试验,2017,57(3):35-37,49 李娜娜.钛合金高温防氧化玻璃-陶瓷涂料的制备及表征[J],涂料工业,2012,8:60-65 杨启.钛合金榫结构微动疲劳防护技术研究综述[J],航空制造技术,2020,63(Z2):14-22 李康.钛合金榫头微动疲劳试验研究现状与发展[J],钛工业进展,2014,4:1-5 陈国清.连铸AZ31镁合金的热挤压变形组织与性能[J],塑性工程学报,2009,6:50-55 陈国清.SiCw对WC-ZrO2材料微观组织及力学性能的影响[J],现代技术陶瓷,2019,40(3):191-198 王浩淼.表面纳米化对高温Ti合金与TiAl合金的扩散连接工艺及力学性能影响[J],精密成形工程,2020,12(2):48-54 王晓晨.表面纳米化对钛合金与钛铝合金扩散连接影响的研究[J],热加工工艺,2019,09:27-30 叶长松.芳纶浆粕对酚醛树脂基摩擦材料性能影响[J],工程塑料应用,2020,48(3):130-133,138 胥广亮.等径角挤压对AZ31镁合金组织及力学性能的影响[J],材料工程,2011,2:69-72 杨继伟.碎渣机高性能滚齿板的研究[J],铸造技术,2016,06:1182-1185 付雪松.AZ31镁合金热轧变形的动态再结晶机制[J],稀有金属材料与工程,2011,40(8):1473-1477 陈国清.2Al2铝合金时效成形的微观组织和力学性能[J],Transactions of Nonferrous Metals Society of China,2012,22(8):1975-1980 李壮.2219T87铝合金焊接接头的常温蠕变行为及其预测[J],中国有色金属学报,2014,9:2235-2242 黄鹏.减摩剂及其协同效应对树脂基摩擦材料性能影响[J],润滑与密封,2020,45(12):113-118 罗懋钟.典型孔结构激光冲击强化残余 应力场特征及有限元分析[J],航空制造技术,2020,63(17):47-53

推荐链接
down
wechat
bug