近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Zu, Yufei,Wang, Kang,Lv, Shasha,Chen, Guoqing,Fu, Xuesong,Zhou, Wenlong.Interfacial microstructure and mechanical properties of the superplastically joined TiO2-doped ...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,779
Wang, Qi,Chen, Guo-qing,Wang, Kang,Fu, Xue-song,Zhou, Wen-long.Enhanced TiAl/Ti3SiC2 diffusion bonding by introducing amorphous intergranular films in Ti3SiC2...[J],SCRIPTA MATERIALIA,2020,178:493-497
李明浩,王雅琨,陈国清,付连生,付雪松,周文龙.高温熔凝法制备Y2O3/Sm2O3双掺杂Al2O3-ZrO2共晶陶瓷的微观组织及力学性能[J],陶瓷学报,2019,40(3):334-341
Zhang, S. H.,Chen, D. Y.,Shang, Y. L.,Chen, G. Q.,Pokrovsky, A., I,Ma, Y.,Xu, Y.,El-Aty, A. A..Experimental Investigation of Novel Impact Hydroforming Technology on Sheet Metal Formability[A],2018,1063(1)
Luo, Junting,Luo, Shuyi,Zhang, Chunxiang,Xue, Yahong,Chen, Guoqing.Analysis of the intragranular microstructure in ceramic nanocomposites and their effect on the ...[J],JOURNAL OF THE AMERICAN CERAMIC SOCIETY,2018,101(11):5151-5156
Fu, Xuesong,Wang, Xiaochen,Wang, Qi,Zhou, Wenlong,Xu, Huiyuan,Liu, Degui,Li, Zhiqiang,Chen, Guoqing.Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a ...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2018,27(10,SI):5551-5560
刘桂良,武天洋,李明浩,潘钱付,唐睿,陈国清,王清.固溶和稳定化处理后Zr-Mo微合金化310S不锈钢的显微组织和耐腐蚀性能[J],机械工程材料,2018,42(9):26-32,40
郑晓兵,牛志强,周文龙,陈国清,刘德贵,李志强,付雪松.基于新型试验装置的TC4钛合金面接触微动磨损行为研究[J],工程与试验,2018,58(3):95-99
刘崇远,陈国清,邵杰,李志强,周文龙,付雪松.X射线衍射法测试TC4钛合金喷丸残余应力的精确度研究[J],工程与试验,2018,58(3):8-12,60
Yang, Qi,Zhou, Wenlong,Niu, Zhiqiang,Zheng, Xiaobing,Chen, Guoqing,Li, Zhiqiang,Fu, Xuesong,Wang, Qi.Effect of different surface asperities and surface hardness induced by shot-peening on the fret...[J],SURFACE & COATINGS TECHNOLOGY,2018,349:1098-1106
Sun, Weitao,Zhou, Wenlong,Liu, Jianfa,Fu, Xuesong,Chen, Guoqing,Yao, Shan.Studies on Dynamic Tribology Properties of Friction Materials by Using an Approximate In Situ O...[J],JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME,2018,140(5)
陈国清,赵薇,任媛媛,付雪松,周文龙.微波烧结WC-ZrO2复合材料的微观组织及增韧机理[J],现代技术陶瓷,2018,39(4):287-294
Li, Zhen,Wen, Dong-hui,Ma, Yue,Wang, Qing,Chen, Guo-qing,Zhang, Rui-qian,Tang, Rui,He, Huan.Prediction of alloy composition and microhardness by random forest in maraging stainless steels...[J],JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2018,25(7):717-723
Wen, D. H.,Liaw, P. K.,Wang, Q.,Jiang, B. B.,Zhang, C.,Li, X. N.,Chen, G. Q.,Tang, R.,Zhang, R. Q.,Dong, C..Developing fuel cladding Fe-25Cr-22Ni stainless steels with high microstructural stabilities vi...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2018,719:27-42
Sun, Weitao,Zhou, Wenlong,Liu, Jianfa,Fu, Xuesong,Chen, Guoqing,Yao, Shan.Development of a Composite Friction Material with Excellent Fade Resistance by Employing Oversi...[J],TRIBOLOGY LETTERS,2018,66(1)
Sun, Weitao,Zhou, Wenlong,Liu, Jianfa,Fu, Xuesong,Chen, Guoqing,Yao, Shan.The Size Effect of SiO2 Particles on Friction Mechanisms of a Composite Friction Material[J],TRIBOLOGY LETTERS,2018,66(1)
Lv, Xingjun,Chen, Guoqing,Duan, Yuping.Electromagnetic wave absorption properties of cement-based composites filled with graphene nano...[J],CONSTRUCTION AND BUILDING MATERIALS,2018,162:280-285
Yang, Qi,Zhou, Wenlong,Zhong, Yining,Zhang, Xinhua,Fu, Xuesong,Chen, Guoqing,Li, Zhiqiang.Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail...[J],INTERNATIONAL JOURNAL OF FATIGUE,2018,107:83-95
Ma, Yan,Chen, Guo-qing,Xu, Yong,Zhang, Shi-Hong,Banabic, Dorel,Abd El-Aty, Ali,Chen, Da-yong,Cheng, Ming,Song, Hong-wu,Pokrovsky, Artur Igorevich.Investigation on formability enhancement of 5A06 aluminium sheet by impact hydroforming[J],CIRP ANNALS-MANUFACTURING TECHNOLOGY,2018,67(1):281-284
杨喜锐,周大雨,马晓倩,王雪霞,徐进,陈国清,侯晓多,刘晓英,高晓霞.Synthesis of dopant-free tetragonal zirconia nano-powders with aqueous precursor and their optica...[J],Materials Research Expresss,2018,6:15041-15041
房灿峰,郭文凯,王荫洋,陈国清,郝海.原位Mg2Sn增强镁基复合材料的制备及其组织性能研究[A],2018
陈国清,武天洋,潘钱付,唐睿,王清,周文龙.新型微合金化310S奥氏体不锈钢热轧板的微观组织演变[A],2017,4
Wen, Donghui,Jiang, Beibei,Wang, Qing,Yu, Fengyun,Li, Xiaona,Tang, Rui,Zhang, Ruiqian,Chen, Guoqing,Dong, Chuang.Influences of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austeni...[J],MATERIALS & DESIGN,2017,128:34-46
Fu, Lian-sheng,Wang, Zhen,Fu, Xue-song,Chen, Guo-qing,Zhou, Wen-long.Microstructure and mechanical properties of Y2O3-doped melt-grown Al2O3-ZrO2 eutectic ceramic[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,703:372-379
Yang, Shuo,Yang, Hongbiao,Wang, Dongjun,Dai, Zhaohua,Huang, Yi,Chen, Guoqing.Failure analysis of the turret bearings wear on SYS in the Bohai Bay area[J],ENGINEERING FAILURE ANALYSIS,2017,78:134-146
房灿峰,闻志恒,郝海,陈国清,张兴国.纳米Mg_2Sn增强镁基复合材料的组织与性能[J],稀有金属材料与工程,2017,46(06):1719-1722
付雪松,孙胃涛,韩文波,李康,陈国清,周文龙.基于高温熔凝法Al2O3/ZrO2/YAG共晶陶瓷显微组织演变规律[J],材料工程,2017,45(2):46-53
Fu, Liansheng,Fu, Xuesong,Chen, Guoqing,Han, Wen-bo,Zhou, Wenlong.Tailoring the morphology in Y2O3 doped melt-grown Al2O3/ZrO2 eutectic ceramic[J],SCRIPTA MATERIALIA,2017,129:20-24
Fu, Xuesong,Chen, Guoqing,Yang, Qi,Sun, Zhonggang,Zhou, Wenlong.The influence of hydrogen on chip formation in cutting Ti-6Al-4V alloys[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,89(1-4):371-375
Jiang, Beibei,Wang, Qing,Wen, Donghui,Xu, Fen,Chen, Guoqing,Dong, Chuang,Sun, Lixian,Liaw, Peter K..Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,687:1-7
Yang, Qi,Zhou, Wenlong,Gai, Pengtao,Zhang, Xinhua,Fu, Xuesong,Chen, Guoqing,Li, Zhiqiang.Investigation on the fretting fatigue behaviors of Ti-6A1-4V dovetail joint specimens treated w...[J],WEAR,2017,372:81-90
Fu, Xue-song,Fu, Lian-sheng,Chen, Guo-qing,Han, Wen-Bo,Zhou, Wen-long.High temperature deformation of non-directionally solidified Al2O3/YAG/ZrO2 eutectic bulk ceram...[J],CERAMICS INTERNATIONAL,2017,43(2):1781-1787
Fang, Canfeng,Zhang, Xingguo,Chen, Guoqing,Hao, Hai,Liu, Xiaoteng,Wen, Zhiheng.Microstructures and mechanical properties of Mg2Sn-nanophase reinforced Mg-Mg2Sn composite[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,684:229-232
卢尚健,付雪松,孙胃涛,周文龙,陈国清.不同改性矾土添加量下树脂基复合摩擦材料的性能[J],机械工程材料,2017,41(1):85-89
周文龙,陈国清,付雪松.Investigation on the fretting fatigue behaviors of Ti-6Al-4V dovetail joint specimens treated wit...[J],wear,2017,372(2):81-90
付雪松,陈国清,周文龙.High temperature deformation of non-directionally solidified Al2O3/YAG/[J],Ceramics international,2017,43(2):1781-1787
付雪松,周文龙,陈国清.湿喷丸强化对TC4 合金疲劳断裂机制的影响[J],稀有金属材料与工程,2017,46(3):765-769
房灿峰,郝海,陈国清,张兴国.纳米Mg2Sn增强镁基复合材料组织与性能[J],稀有金属材料与工程,2017,46:1719-1722
Fu, X.S.,Yang, Q.,Sun, W.,Lu, S.J.,Chen, G.Q.,Zhou, W.L..Multi-pass large strain rolling of as-cast AZ31 magnesium alloy[J],MATERIALS SCIENCE AND TECHNOLOGY,2016,32(18):1869-1876
陈国清,王惠敏,李鸿翔,唐睿,周文龙.润滑条件对不锈钢管材推弯成形质量的影响[J],锻压技术,2016,41(11):115-121
京公网安备 11010802027423号