当前位置: X-MOL首页全球导师 国内导师 › 张驰

个人简介

教育经历 2006.92012.1 东北大学材料加工工程博士 2002.92006.7 东北大学材料成型及控制工程学士 1999.92002.7 锦州中学 工作经历 2013.11至今 大连理工大学讲师 2019.92020.9 法国洛林大学LEM3国家实验室访问学者 2018.1至今 大连理工大学材料科学与工程学院副教授

研究领域

金属材料(钢铁、高温合金、钛合金、锆合金等)塑性加工及热处理过程微观组织演变表征及数值计算 先进钢铁材料轧制生产工艺设计与优化 金属形变再结晶组织和织构演变机理及多尺度建模

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

[1]Shen, Wen-fei.Metadynamic recrystallization of Nb-V microalloyed steel during hot deformation[J],JOURNAL OF MATERIALS RESEARCH,2022,32(3):656-665 [2]张立文.Modelling the Effects of Processing Parameters on Dynamic Recrystallization Behaviors during Hot ...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,24(5) [3]Gu, Sendong.Modeling the Effects of Processing Parameters on Dynamic Recrystallization Behavior of Deformed...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,24(5):1790-1798 [4]张驰.Modeling the plastic deformation behavior of polycrystalline ferritic stainless steel using CPFEM[A],The 17th IUMRS International Conference in Asia,2022 [5]Cui, Y..Effects of process parameters on vacuum hot bulge forming process on reactor coolant pump rotor...[A],2ND INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING (IWMSME2018),2022,504(1) [6]张驰.Effects of microstructure and gamma ' distribution on the hot deformation behavior for a powder...[J],JOURNAL OF MATERIALS RESEARCH,2022,29(23):2799-2808 [7]张立文.Experimental investigation of transient contact heat transfer between[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2022,96(5):451-457 [8]Zhu, Zhi.Experimental investigation of transient contact heat transfer between 300M and 5CrNiMo[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2022,96:451-457 [9]Shen, Wenfei.Experimental Study on the Hot Deformation Characterization of Low-Carbon Nb-V-Ti Microalloyed S...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,27(9):4616-4624 [10]Dong, Y. L..Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites[J],MATERIALS SCIENCE AND ENGINEERING A STRUCTURAL MATERIALS PROPERTIES MICROST,2022,504(1-2):49-54 [11]Li Rui Qin.Finite Element Simulation of Hot Shrink-fit Process for Reactor Coolant Pump Rotor-can[A],6th International Conference on Manufacturing Science and Engineering (ICMSE),2022,32:1346-1349 [12]张驰.Improvement of Surface Ridging Resistance of an Ultra-purified Ferritic Stainless Steel by Opti...[J],Acta Metallurgica Sinica,2022,29(6):561-567 [13]张驰.The Microstructure and Gamma Prime Distributions in Inertia Friction Welded Joint of P/M Supera...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,26(4):1581-1588 [14]张驰.The processing map and microstructure evolution of Ni-Cr-Mo-based C276 superalloy during hot co...[J],JOURNAL OF ALLOYS AND COMPOUNDS,2022,728:1269-1278 [15]张驰.The kinetics and cellular automaton modeling of dynamic recrystallization behavior of a medium ...[J],MATERIALS SCIENCE AND ENGINEERING A STRUCTURAL MATERIALS PROPERTIES MICROST,2022,678:33-43 [16]张驰.The kinetics and microstructural evolution during metadynamic recrystallization of medium carbo...[J],JOURNAL OF MATERIALS RESEARCH,2022,32(7):1367-1375 [17]张驰.The Kinetics of Metadynamic Recrystallization in a Ni-Cr-Mo-Based Superalloy Hastelloy C-276[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,25(2):545-552 [18]张立文.The study on kinetics of metadynamic recrystallization of a Nb-V microalloyed non-quenched and te...[A],8nd International Conference on Physical and Numerical Simulation of Materials Processing,2022 [19]张驰.3D Crystal Plasticity Finite Element Modeling of the Tensile Deformation of Polycrystalline Fer...[J],Acta Metallurgica Sinica,2022,30(1):79-88 [20]Xia, Yingnan.A comparative study of constitutive models for flow stress behavior of medium carbon Cr-Ni-Mo a...[J],JOURNAL OF MATERIALS RESEARCH,2022,32(20):3875-3884 [21]张驰.Characterization of Static Recrystallization of a Ni-Cr-Mo-Based C276 Superalloy in Two-Stage I...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,27(12,SI):6426-6434 [22]Gu, Sendong.Characteristics of metadynamic recrystallization of Nimonic 80A superalloy[J],JOURNAL OF MATERIALS RESEARCH,2022,30(4):538-546 [23]张驰.Characterization of Hot Deformation Behavior of Hastelloy C-276 Using Constitutive Equation and...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,24(1):149-157 [24]张驰.Cellular automaton modeling of dynamic recrystallization of Ni-Cr-Mo-based C276 superalloy duri...[J],JOURNAL OF MATERIALS RESEARCH,2022,34(18):3093-3103 [25]徐倩虹.Cellular automaton modeling of dynamic recrystallization of Nimonic 80A superalloy based on inhom...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022 [26]Xu, Qianhong.Cellular Automaton Modeling of Dynamic Recrystallization of Nimonic 80A Superalloy Based on Inh...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,27(9):4955-4967 [27]Gu, Sendong.Constitutive Modeling for Flow Stress Behavior of Nimonic 80A Superalloy During Hot Deformation...[J],HIGH TEMPERATURE MATERIALS AND PROCESSES,2022,35(3):327-336 [28]Shen, Wenfei.Investigation of recrystallization behavior of large sized Nb-V microalloyed steel rod during t...[J],JOURNAL OF MATERIALS RESEARCH,2022,32(12):2389-2396 [29]张驰.Crystal Plasticity Analysis of the Relation between Micro-Texture and Surface Ridging for a 21%...[J],STEEL RESEARCH INTERNATIONAL,2022,91(10) [30]Shen, Wenfei.A modified Avrami equation for kinetics of static recrystallization of Nb-V microalloyed steel:...[J],真空,2022,150(,SI):116-123 [31]许玉杰.铁素体不锈钢成形过程表面起皱的晶体塑性有限元分析[J],塑性工程学报,2020,27(10):123-129 [32]申文飞.加氢反应器焊后局部热处理过程数值模拟与工艺优化[J],金属热处理,2018,43(2):213-217 [33]柳翠茹.摩擦系数对宽厚板轧制宽度影响的数值模拟[J],塑性工程学报,2022,23(6):106-111 [34]张立文.核主泵转子屏蔽套热套装残余应力数值模拟和实验研究[A],2016年全国残余应力技术交流及对部件寿命疲劳损伤与断裂检测技术交流会.,2022 [35]崔岩.核主泵转子屏蔽套热套装过程数值模拟研究[J],中国核电,2022,增刊(12):264-267 [36]崔岩.核主泵转子屏蔽套真空热胀形原理及技术[J],精密成形工程,2022,13(01):105-110 [37]沈文彦.基于VB与Fortran开发固态接触换热系数测量系统[J],信息与电脑,2016,7:47-49 [38]徐倩虹.Nimonic 80A 高温合金静态再结晶行为元胞自动机模拟[J],塑性工程学报,2018 [39]李梦飞.Nimonic 80A镍基高温合金静态再结晶行为[J],材料热处理学报,2016,10:192-199 [40]Zhu, Zhi.胀形间隙对核主泵转子屏蔽套真空热胀形的影响[J],中国有色金属学报,2017,4:789-794

推荐链接
down
wechat
bug