近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Xu, FM,Zhu, SJ,Zhao, J,Qi, M,Wang, FG,Li, SX,Wang, ZG.Effect of stress ratio on fatigue crack propagation in a functionally graded metal matrix composit[J],COMPOSITES SCIENCE AND TECHNOLOGY,2004,64(12):1795-1803
[2]Xu, FM,Zhu, SJ,Zhao, J,Qi, M,Wang, FG,Li, SX,Wang, ZG.Fatigue crack growth in SiC particulates reinforced Al matrix graded composite[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2003,360(1-2):191-196
[3]黄自德,许富民,郭素墨,董伟.2219铝合金再结晶行为研究[J],热加工工艺,2019,47(24):211-214
[4]董伟,李文畅,许富民,韩阳,张伟.单分散铁基Fe60Ni7.5Mo7.5P10C10B5金属玻璃球形粒子的制备及评价[J],材料工程,2018,46(10):30-36
[5]董伟,李文畅,许富民,韩阳,白兆丰,康世薇.脉冲微孔喷射法单分散球形微粒子的制备及其应用[J],材料工程,2018,46(2):142-151
[6]董伟,魏宇婷,康世薇,盖如坤,许富民,鲁栋.基于脉冲微孔喷射的液滴沉积成型[J],材料工程,2016,44(10):1-7
[7]董伟,康世薇,李鹏廷,魏宇婷,许富民.脉冲微孔喷射技术及其在增材制造方面的应用[J],航空制造技术,2016,12:16-22
[8]董伟,许富民,李鹏廷.Metal micro-droplets deposition forming technology based on Pulsated Orifice Ejection Method[A],2016,1003-1006
[9]Xu F.M.,Fu M.B.,Dong W.,Zhao L.,Lu D.,Tan Y..One step fabrication of core-shell structures in immiscible alloys for thermal energy storage[A],2014,983:131-134
[10]Xu, Fumin,Wu, Shenrui,Tan, Yi,Li, Jiayan,Li, Yaqiong,Liu, Yao.Boron Removal from Metallurgical Silicon using Si-Al-Sn Ternary Alloy[J],SEPARATION SCIENCE AND TECHNOLOGY,2014,49(2):305-310
[11]鲁栋,董伟,付一凡,李颖,赵丽,许富民,谭毅.微米级球形Sn-Pb金属粒子脉冲微孔法制备技术研究[J],焊接,2013,11:28-32
[12]董伟,李颖,三浦彩子,许富民,谭毅,川崎亮.均匀球形金属玻璃粒子的制备及冷却速率评价[J],稀有金属材料与工程,2013,S2:453-457
[13]Zhao, L.,Lu, D.,Dong, W.,Li, Y.,Kawasaki, A.,Xu, F. M..Simulation of 63Sn-37Pb BGA packaging particle formation based on Pulsated Orifice Ejection Method[A],2013,338-+
[14]Lu, D.,Xu, F. M.,Zhao, L.,Fu, Y. F.,Dong, W.,Tan, Y.,Kawasaki, A..Fabrication of BGA Solder Balls by Pulsated Orifice Ejection Method[A],2013,694-+
[15]Zhao L.,Xu F.-M.,Dong W.,Li Y.,Kawasaki A..Simulation of the droplet vibration during preparation of mono-sized micro particles by pulsated ori[J],Gongneng Cailiao/Journal of Functional Materials,2013,44(SUPPL.1):166-170
[16]赵丽,许富民,董伟,李颖,川崎亮.脉冲微孔法制备均匀微粒子过程中液滴振动机理的模拟研究[J],功能材料,2013,44(z1):166-170
[17]Zhang, L.,Tan, Y.,Xu, F. M.,Li, J. Y.,Wang, H. Y.,Gu, Z..Removal of Boron from Molten Silicon using Na2O-CaO-SiO2 Slags[J],SEPARATION SCIENCE AND TECHNOLOGY,2013,48(7):1140-1144
[18]Yu S.,Dong W.,Xu F.,Fu M.,Tan Y..Effects of heat treatment on the creep crack growth behavior in AL/AL-4wt%Cu functionally graded mat[A],2013,711:81-86
[19]张磊,谭毅,许富民,李佳艳.造渣精炼去除多晶硅中B杂质的研究[J],材料导报,2013,27(3):18-21
[20]董伟,许富民,谭毅.Effects of heat treatment on the creep crack growth behavior in Al/A/-4wt%Cu functionally graded mat[A],2013,711:81-86
[21]许富民,李佳艳,谭毅.Purification Efficiency and B Removal of Polysilicon during its Solidification from a Si-Al-Sn Melt[A],2013,772:68-71
[22]Xu, Fumin,Gu, Zheng,Shi, Shuang,Tan, Yi,Jiang, Dachuan,Dong, Wei.Research on the Influence of Electron Beam Parameters on Molten Pool Morphologies during Electron [A],2012,476-478:1781-1784
[23]许富民,谭毅,董伟.Research on the Influence of Electron Beam Parameters on Molten Pool Morphologies during Electron Be[J],Advanced Materials Research,2012,476(1):1781-1784
[24]许富民,谭毅,李佳艳,董伟,张俊善.“1+1”式教学模式对研究生培养的促进作用研究[J],中国校外教育,2011,18:92
[25]Xu, F. M.,Zhang, Z. J.,Shi, X. L.,Tan, Y.,Yang, J. M..Effects of adding yttrium nitrate on the mechanical properties of hot-pressed AlN ceramics[J],JOURNAL OF ALLOYS AND COMPOUNDS,2011,509(35):8688-8691
[26]刘美,许富民,李佳艳,闻立时,张磊,谭毅.冶金提纯多晶硅用坩埚内壁氮化硅涂层的制备[J],机械工程材料,2011,06:8-12+75
[27]Cong, Qian,Xu, Fumin,Zhang, Junshan,Li, Jiayan,Dong, Wei,Shi, Xiaolei,Tan, Yi.Influence of heat treatment on microstructure and mechanical properties of Al/Al-Cu graded materia[J],7th China-Japan Bilateral Symposium on High Temperature Strength of Materials,2011,24(2):118-124
[28]Shi, Xiaolei,Dong, Yali,Xu, Fumin,Tan, Yi,Wang, Lai,Yang, Jenn-ming.Preparation and properties of nano-SiC strengthening Al2O3 composite ceramics[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2011,528(6):2246-2249
[29]张慧星,谭毅,孙世海,许富民,姜大川.定向凝固提纯对工业硅杂质及电阻率的影响[J],机械工程材料,2011,35(3):52
[30]董伟,谭毅,许富民.Resistivity distribution characteristics of metallurgical silicon ingot after directional solidifica[J],Material Science Forum,2011,675(1):109-112
[31]许富民,李佳艳,张志军,石小磊,李晓娜,谭毅.烧结助剂添加方式对AlN陶瓷力学性能的影响[J],机械工程材料,2011,35(7):50
[32]Shi, X. L.,Xu, F. M.,Zhang, Z. J.,Dong, Y. L.,Tan, Y.,Wang, L.,Yang, J. M..Mechanical properties of hot-pressed Al2O3/SiC composites[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2010,527(18-19):4646-4649
[33]Zhang, Lei,Li, Jiayan,Wang, Haoyang,Xu, Fumin,Tan, Yi.Effect of heating treatment on the resistivity of polycrystalline silicon[A],2010,675-677:113-+
[34]Shi, Shuang,Dong, Wei,Sun, Shihai,Tan, Yi,Li, Guobin,Xu, Fumin.Resistivity distribution characteristics of metallurgical silicon ingot after directional solidifi[A],2010,675-677:109-+
[35]Zhang, Zhijun,Xu, Fumin,Tan, Yi,Shi, Xiaolei,Dong, Wei.Microstructure and Mechanical Properties of AlN Ceramics Sintered with Yttrium Nitrate[A],2010,675-677:159-162
[36]Cong, Qian,Xu, Fumin,Li, Jiayan,Tan, Yi,Shi, Xiaolei,Shi, Shuang,Dong, Wei.Fabrication and properties of Al/Al-Cu functionally graded material[A],2010,675-677:575-578
[37]Xu, Fumin,Wen, Kai,Tan, Yi.Microstructures and mechanical properties of low carbon fishplate materials[J],ACTA METALLURGICA SINICA-ENGLISH LETTERS,2010,23(3):176-184
[38]Shi, Xiaolei,Tan, Yi,Xu, Fumin,Li, Jiayan,Dong, Yali,Wang, Lai.Hot-pressed Al2O3-SiC(-C) composites with polycarbosilane as the precursor[J],MATERIALS & DESIGN,2010,31(3):1628-1632
[39]Shi, X. L.,Tan, Y.,Xu, F. M.,Dong, Y. L.,Zhang, Z. J.,Li, X. N.,Wang, L..Mechanical properties of Al2O3-SiC-C composites using polycarbosilane as SiC precursor[J],JOURNAL OF ALLOYS AND COMPOUNDS,2010,490(1-2):484-487
[40]Shi, Xiao-Lei,Xu, Fu-Min,Tan, Yi,Wang, Lai.MECHANICAL PROPERTIES OF HOT-PRESSED B(4)C-SiC COMPOSITES[A],2010,220:189-196
京公网安备 11010802027423号