个人简介

侯清宇，男，副教授。1973年生，1997年毕业于华东冶金学院金属材料与热处理专业（学士），2003年获得安徽工业大学材料加工工程专业硕士学位，2012年获得南京理工大学材料科学与工程博士学位。自1997年7月开始至今一直在安徽工业大学任教，主讲过的本科生课程主要有“金属学与热处理”、“金属材料学”和“金属力学性能”等，已发表SCI/EI收录论文40余篇。

研究领域

(1)金属材料的表面熔覆与喷涂技术 (2)先进钢铁材料的组织结构和性能控制理论与技术 (3)难熔金属材料的放电等离子体烧结技术

等离子堆焊表面改性 金属材料的塑性变形机制 热核聚变反应堆面向等离子体材料

近期论文

查看导师新发文章 （温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Qingyu Hou(#)(*), Xiaoyu Ma, RongchengLu, Wei Wang, Ping Wang, Zhenyi Huang(*), Microstructure and laserirradiation characteristics of TiC-free and TiC-doped tungsten-based coatingsprepared by supersonic atmospheric plasma spraying, Surface and Coatings Technology,2019, 358: 796-805. [2]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang,Tingting Ding, Yucheng Wu(*), Lanthanum hydride doped tungsten-basedcoating fabricated by supersonic atmospheric plasma spraying, Surface and CoatingsTechnology, 2016, 299: 153-161. [3]QingyuHou(#)(*), Laima Luo, ZhenyiHuang, Ping Wang, Tingting Ding, Yucheng Wu(*), Influence of LaH2on oxidation characteristics and irradiation melting characteristics of atungsten coating fabricated by atmospheric plasma spraying. Surface andCoatings Technology, 2016, 299: 143-152. [4]Qingyu Hou(#)(*), Laima Luo, ZhenyiHuang, Ping Wang, Tingting Ding, Yucheng Wu(*), Comparison of W-TiCcomposite coatings fabricated by atmospheric plasma spraying and supersonicatmospheric plasma spraying，Fusion Engineering andDesign, 2016, 105: 77-85. [5]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang, TingtingDing, Yucheng Wu(*), Microstructure andproperties of mixed Cu-Sn and Fe-based alloyswithout or with molybdenum addition processed by plasma transferred arc,Surface & Coatings Technology, 2015, 283: 184-193. [6]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang,Tingting Ding, Yucheng Wu(*), Comparison of three kinds ofMC-type carbide modified thick W coatingsfabricated by plasma transferred arc surfacing, Surface & CoatingsTechnology, 2015, 283: 52-60. [7]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang,Tingting Ding, Yucheng Wu(*), Liquid phase separationmicrostructure and properties of mixed Cu-Sn and Co-base alloys without or withmolybdenum addition processed by plasma transferred arc hardfacing, Surface& Coatings Technology, 2015, 262: 87-96. [8] Qingyu Hou(#)(*), Microstructure and wearresistance of steel matrix composite coating reinforced by multiple ceramicparticulates using SHS reaction of Al-TiO2-B2O3system during plasma transferred arc overlay welding, Surface & CoatingsTechnology, 2013, 226: 113-122. [9]Qingyu Hou(#)(*),Influence of molybdenum on the microstructure and properties of a FeCrBSi alloycoating deposited by plasma transferred arc hardfacing, Surface & CoatingsTechnology, 2013, 225: 11-20.

学术兼职

授《金属材料学》和《金属材料与热处理》课程。