近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
(1) Xiaoxiao Chen*, Jun Zhao*, Wenwu Zhang. Process optimization and typical application based on geometrical analysis and response surface method for high-speed five-axis ball-end milling operation. Int J Adv Manuf Tech, 2017, 89(5), 1509-1527.(SCI/EI)
(2) Xiaoxiao Chen, Jun Zhao*, Wenwu Zhang. Influence of milling modes and tool postures on the milled surface for multi-axis finish ball end milling. Int J Adv Manuf Tech, 2015,77: 2035-2050. (SCI/EI)
(3) Xiaoxiao Chen, Jun Zhao*, Yongwang Dong, Shiguo Han, Anhai Li, Dong Wang. Effects of inclination angles on geometrical features of machined surface in five-axis milling. Int J Adv Manuf Tech, 2013, 65 (9-12), 1721-1733 (SCI/EI)
(4) Xiaoxiao Chen, Jun Zhao*, Yueen Li, Shiguo Han, Qingyuan Cao, Anhai Li. Investigation on ball end milling of P20 die steel with cutter orientation. Int J Adv Manuf Tech, 2012, 59(9-12): 885-898. (SCI/EI)
(5) Xiaoxiao Chen, Jun Zhao*, Shuai Liu, Yongwang Dong and Fuzeng Wang. Investigation on the chip formation concerning tool inclination angles in ball end milling of H13 die steel, PIMechE, Part B: Journal of Engineering Manufacture . 2014, 228 (3): 337-355. (SCI/EI)
(6) Xiaoxiao Chen, Jun Zhao*, Yueen Li, Shiguo Han, Qingyuan Cao, Anhai Li. Numerical modeling of high-speed ball end milling with cutter inclination angle, PIMechE, Part B: Journal of Engineering Manufacture, 2012, 226(4): 606-616. (SCI/EI)
(7) Xiaoxiao Chen, Jun Zhao*, Yongwang Dong, Anhai Li and Dong Wang. Research on the machined surface integrity under combination of various inclination angles in multi-axis ball end milling, PIMechE, Part B: Journal of Engineering Manufacture. 2014, 228(1): 31-50. (SCI/EI)
(8) Xiaoxiao Chen*, Jun Zhao, Wenwu Zhang. Optimization analysis considering the cutting effects for high speed five-axis down milling process by employing ball end mill. Int J Adv Manuf Tech, 2019, DOI 10.1007/s00170-019-04436-0. (SCI/EI)
(9) Heng Wang, XiaoxiaoChen*, Wenwu Zhang, Effects of laser beam lead angle on picosecond laser processing of silicon nitride ceramics, Journal of Laser Applications, 2019, DOI: 10.2351/1.5126920. (SCI/EI)
(10) Xiaoxiao Chen, Jun Zhao*, Yongwang Dong, Shuai Liu, Jiabang Zhao. Study on the machined surface geometry generated by multi-axis ball end milling process, Materials Science Forum. 2014, 770,370-375. (EI)
(11) Xiaoxiao Chen, Jun Zhao*, Geometrical Modeling of Tool-Workpiece Contact Zone and Chip Formation in Finish Ball End Milling Process with Tool Inclination Angles, Key Engineering Materials, 2016, 693: 788-794. (EI)
(12) Xiaoxiao Chen*, Chuanxin Tian, Yihui Huang, Dexin Li, Hao Wang, Wenwu Zhang. Surface quality for rotary ultrasonic milling of quartz glass employing diamond ball end tool with tool inclination angle, Procedia Engineering, 2017, 174:360-369 (EI)
(13) Xiaoxiao Chen*, Wenwu Zhang*. Inclination angle effects in machining process and surface quality for rotary ultrasonic multi-axis ball end milling of quartz glass with diamond tool, IMCC, 2017
(14) Heng Wang, Xiaoxiao Chen*, Wenwu Zhang, Research on picosecond laser processing technology of ceramic materials involving incident angle, Advanced Laser Processing and Manufacturing III (EI, accepted)
(15) Chuanxin Tian, Xiaoxiao Chen*, Dexin Li, Wenwu Zhang, Guanshi Xi. Analysis of surface formation of rotary ultrasonic face milling of quartz glass based on nano-indentation experiment, Procedia Engineering, 2017, 174:470-476 (EI)
(16) Dexin Li, Xiaoxiao Chen*, Chunhai Guo, Taojun, Chuanxin Tian, Yimin Deng, Wenwu Zhang. Micro surface texturing of alumina ceramic with nanosecond laser, Procedia Engineering, 2017, 174:370-376 (EI)
(17) 陈晓晓，赵军, 李月恩，韩式国，曹清园. 基于VERICUT 仿真和优化的复杂曲面加工策略研究. 制造技技术与机床, 2011, (12): 209-212.
(18) 陈晓晓，赵军, 李月恩，韩式国，曹清园. 圆形刀片铣削P20 模具钢的有限元模拟. 制造技术与机床，2011, (11):101-105.
(19) 陈晓晓*，杨亚鹏，张文武. 计算机辅助制造工艺规划与加工仿真技术探讨，第二届中多能场复合智能制造大会，2018年4月20日-22日，浙江，宁波
(20) 陈晓晓*，王恒，张文武. 微织构阵列离散陶瓷材料旋转超声加工机理与工艺研究. 第 18 届全国特种加工学术会议，2019年7 月31日至8月3日，新疆，乌鲁木齐（推荐至《电加工与模具》正式发表）
(21)杨亚鹏，陈晓晓*，张亚，张文武.硬脆材料微纳米压痕微尺度材料去除机理有限元仿真研究，工具技术，2018，52（7），45-48
(22)张正，陈晓晓*，李德鑫，张文武，于爱兵.工程陶瓷凹槽型表面微织构激光制备工艺研究，应用激光，2018，38（1），64-69
(23)田传鑫，陈晓晓*，关世玺，黄亿辉，王浩，张文武，基于LS-DYNA的石英玻璃旋转超声铣削仿真研究，工具技术，2017，51，521(01)：44-47
(24)田传鑫，陈晓晓*，张文武，关世玺，王浩，黄亿辉，石英玻璃旋转超声铣削表面质量研究，制造技术与机床，2017，(06)，91-96
(25) 王恒，杨亚鹏，陈晓晓*，张文武. 基于有限元法的微织构阵列离散化硬脆材料旋转超声铣削工艺研究，2018年全国超声加工技术研讨会（北京）论文集，2018，134-138， 2018年10月19日至10月21日，北京
(26) 杨亚鹏，王恒，陈晓晓* ，张亚，张文武. 基于LS-DYNA的离散化氧化铝陶瓷旋转超声铣削仿真研究，2018年全国超声加工技术研讨会（北京）论文集，2018，139-144 ，2018年10月19日至10月21日，北京
(27) 杨亚鹏，陈晓晓*，张亚，张文武. 激光冲击强化对AZ91D镁合金力学性能的试验研究，应用激光，2018，38（5），798-804
(28) 王恒，陈晓晓*，张文武. 基于有限元法的离散化氧化铝陶瓷金刚石刀具端铣机理研究. 第 18 届全国特种加工学术会议，2019年7 月31日至8月3日，新疆，乌鲁木齐
(29) 王恒，陈晓晓*，张文武，前倾角对氮化硅陶瓷多轴激光加工质量的影响，2019年中国光学学会学术大会（Poster）
(30) Shiguo Han, Jun Zhao, Xiaoxiao Chen, Yueen Li, Qingyuan Cao, Yongwang Dong.Influence of Inclination Angle on Machined Surface Hardness in High Speed Ball End Milling, Advanced Materials Research 2012, 500: 134-139. (EI)
(31)Dong Wang, Jun Zhao, Xiaoxiao Chen, Yonghui Zhou.Wear Mechanisms of Ceramic Tools in High-speed Turning of Superalloy GH2132.Key Engineering Materials,2014,589-590:23-27. (EI)
(32)韩式国，赵军, 陈晓晓，李安海，董永旺. 数控编程技术及其典型应用. 组合机床与加工自动化技术，2012, (3): 100-103. （中文核心）
(33)董永旺, 赵军, 陈晓晓, 郭胜光, 李安海. 球头铣刀铣削斜面的三维有限元仿真研究. 硬质合金, 2012, 29(4): 215-220. （中文核心）
(34) Qingyuan Cao, Jun Zhao, Yueen Li, Xiaoxiao Chen. Tool deflection modeling in ball-end milling of sculptured surface. Key Engineering Materials,2012,516:7-12. (EI)
(35) Qingyuan Cao, Jun Zhao, Shiguo Han, Xiaoxiao Chen. Force coefficients identification considering inclination angle for ball-end finish milling. Precision Engineering. 2012, 36, 252-260. (SCI/EI)
(36) Anhai Li, Jun Zhao, Yonghui Zhou, Xiaoxiao Chen, Dong Wang. Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V. Int J Adv Manuf Tech, 2011, 62(9-12): 933-942. (SCI/EI)
(37) Dong Wang, Jun Zhao, Anhai Li, Xiaobin Cui, Xiaoxiao Chen. Microstructure-Level Modeling for the Properties Prediction of WC-Co Cemented Carbides. 15th International Conference on Advances in Materials and Processing Technologies (AMPT 2012), 23-26 Sep, 2012, Wollongong, Australia.
(38) Dong Wang, Jun Zhao, Yonghui Zhou, Xiaoxiao Chen, Anhai Li, Zhaochao Gong. Extended finite element modeling of crack propagation in ceramic tool materials by considering the microstructural features, Computational Materials Science. (2013) 77, 236–244. (SCI/EI)
(39) Anhai Li, Jun Zhao, Yongwang Dong, Dong Wang, Xiaoxiao Chen. Surface integrity of high-speed face milled Ti-6Al-4V alloy with PCD tools, Machining Science and Technology: An International Journal. 2013, 17:3, 464-482. (SCI/EI)
(40) Hao Wang, Yihui Huang, Xiaoxiao Chen, Wenwu Zhang, Effect of Laser Shock Peening on the Mechanical Properties of 2024 Aluminum Alloy, 2016第十一届国际激光加工技术研讨会
(41) 王浩，黄亿辉，宁成义，陈晓晓，张文武，新一代激光冲击强化实验研究, 第一届激光复合制造协同创新国际论坛
(42) Hao Wang, Chengyi Ning, Yihui Huang, Zhenya Cao, Xiaoxiao Chen, Wenwu Zhang,, Improvement of abrasion resistance in arti？cial seawater and corrosion resistance in NaCl solution of 7075 aluminum alloy processed by laser shock peening, Optics and Lasers in Engineering 2017, 90:179-185. (SCI/EI)
(43) 王浩，宁成义，黄亿辉，陈晓晓，田传鑫，张文武.激光冲击强化对7075铝合金干摩擦特性的实验研究. 应用激光，2017，37（2）：155-160.
【学术会议】
[1] HengWang, XiaoxiaoChen*, WenwuZhang, SPIE/COS Photonics Asia, Oct. 20- 23, 2019, Hangzhou, China. (Poster presentation)
[2] 王恒，陈晓晓*，张文武. 2019年中国光学学会学术大会，2019年8月9日至8月12日，中国合肥. (Poster presentation)
[3] 王恒，陈晓晓*，张文武. 第 18 届全国特种加工学术会议，2019年7 月31日至8月3日，中国乌鲁木齐.
[4] 陈晓晓*，王恒，张文武. 第 18 届全国特种加工学术会议，2019年7 月31日至8月3日，中国乌鲁木齐. (Oral presentation)
[5] 王恒，杨亚鹏，陈晓晓*，张文武. 2018年全国超声加工技术研讨会，2018年10月19日至10月21日，中国北京. (Poster presentation)
[6] 杨亚鹏，王恒，陈晓晓* ，张亚，张文武. 2018年全国超声加工技术研讨会，2018年10月19日至10月21日，中国北京.
[7] 陈晓晓*，杨亚鹏，张文武. 第二届中国多能场复合智能制造大会，2018年4月20日-22日，中国宁波. (Poster presentation)
[8] Xiaoxiao Chen*, Wenwu Zhang*, Dongxi Lv. The 17th International Manufacturing Conference in China, Nov. 23-27, 2017, Shenzhen, China.
[9] Chuanxin Tian, Xiaoxiao Chen*, Dexin Li, Wenwu Zhang, Guanshi Xi, 13th Global Congress on Manufacturing and Management, Nov. 27-30, 2016, Zhengzhou, China. (Oral presentation)
[10] Dexin Li, Xiaoxiao Chen*, Chunhai Guo, Jun Tao, Chuanxin Tian, Yimin Deng, Wenwu Zhang, 13th Global Congress on Manufacturing and Management, Nov. 27-30, 2016, Zhengzhou, China. (Oral presentation)
[11] Xiaoxiao Chen*, Chuanxin Tian, Yihui Huang, Dexin Li, Hao Wang, Wenwu Zhang, 13th Global Congress on Manufacturing and Management, Nov. 27-30, 2016, Zhengzhou, China.
[12] 陈晓晓，田传鑫. 2016年全国超声加工技术研讨会，2016年10月21-23日，中国大连.
[13] Xiaoxiao Chen, Haolei Ru, Yapeng Yang, Zheng Zhang. International workshop on advanced and high-valued manufacturing processes，Oct. 16-17, 2016, Ningbo, China.
[14] 陈晓晓. 第一届多能场复合智能制造大会暨第 81 期中科院交叉学科论坛，2016年4月15-17日，中国宁波.
[15] 陈晓晓. NSFC 机械工程学科 2015 年度青年/地区科学基金项目交流研讨会，2015年 10月29日-31日，中国兰州.
[16] 陈晓晓. 第五届“上银优秀机械博士论文奖”终审答辩会，2015年9月11-12日，中国北京.
[17] Xiaoxiao Chen, Jun Zhao*, 十三届切削与先进制造技术学术会议, 2015年5月22日-24 日，中国太原. (Oral presentation)
[18] Xiaoxiao Chen, Jun Zhao*, Yongwang Dong, Shuai Liu, Jiabang Zhao. The 15th International Manufacturing Conference in China, Oct.16-18, 2013, Nanjing, China. (Oral presentation)
[19] Shiguo Han, Jun Zhao*, Xiaoxiao Chen, Yueen Li, Qingyuan Cao, Yongwang Dong, 10th Asia-Pacific Conference on Materials Processing, June 14-17, 2012. Jinan, China. (Oral presentation)
京公网安备 11010802027423号